diff --git a/jtag/po/ChangeLog b/jtag/po/ChangeLog
index d463ec19..8c10ab69 100644
--- a/jtag/po/ChangeLog
+++ b/jtag/po/ChangeLog
@@ -1,3 +1,8 @@
+2004-01-06  Marcel Telka  <marcel@telka.sk>
+
+	* fr.po: Added French translation by Michel Robitaille.
+	* LINGUAS: Added fr.
+
 2003-10-08  Marcel Telka  <marcel@telka.sk>
 
 	* sk.po: Updated Slovak translation.
diff --git a/jtag/po/LINGUAS b/jtag/po/LINGUAS
index 409faa30..5aa3b307 100644
--- a/jtag/po/LINGUAS
+++ b/jtag/po/LINGUAS
@@ -1,3 +1,4 @@
 # $Id$
 
+fr
 sk
diff --git a/jtag/po/fr.po b/jtag/po/fr.po
new file mode 100644
index 00000000..0d786eaf
--- /dev/null
+++ b/jtag/po/fr.po
@@ -0,0 +1,1563 @@
+# Messages français pour GNU concernant jtag.
+# Copyright © 2004 Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# Michel Robitaille <robitail@IRO.UMontreal.CA>, traducteur depuis/since 1996.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU jtag 0.5.1\n"
+"Report-Msgid-Bugs-To: marcel@telka.sk\n"
+"POT-Creation-Date: 2003-09-24 07:07+0200\n"
+"PO-Revision-Date: 2004-01-04 14:00-0500\n"
+"Last-Translator: Michel Robitaille <robitail@IRO.UMontreal.CA>\n"
+"Language-Team: French <traduc@traduc.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8-bit\n"
+
+#: libbrux/cmd/cmd.c:44
+#, c-format
+msgid "%s: syntax error!\n"
+msgstr "%s: erreur de syntaxe!\n"
+
+#: libbrux/cmd/cmd.c:48 libbrux/cmd/help.c:57
+#, c-format
+msgid "%s: unknown command\n"
+msgstr "%s: commande inconnue\n"
+
+#: libbrux/cmd/cmd_detectflash.c:39 src/cmd/eraseflash.c:47
+#: src/cmd/flashmem.c:47 src/cmd/peekpoke.c:43 src/cmd/peekpoke.c:88
+#: src/cmd/readmem.c:45
+msgid "Error: Bus driver missing.\n"
+msgstr "Erreur: pilote du bus manquant.\n"
+
+#: libbrux/cmd/cmd_detectflash.c:52
+#, c-format
+msgid ""
+"Usage: %s\n"
+"Detect flash memory type connected to a part.\n"
+msgstr ""
+"Usage: %s\n"
+"Détecter un type de mémoire flash connecté.\n"
+
+#: libbrux/cmd/cmd_detectflash.c:59
+msgid "detect parameters of flash chips attached to a part"
+msgstr "paramètres de détection de modules flahs connectés"
+
+#: libbrux/cmd/help.c:39
+msgid ""
+"Command list:\n"
+"\n"
+msgstr ""
+"Liste de commandes:\n"
+"\n"
+
+#: libbrux/cmd/help.c:41 src/cmd/cable.c:99
+#, c-format
+msgid "%-13s %s\n"
+msgstr "%-13s %s\n"
+
+#: libbrux/cmd/help.c:41
+msgid "(no description available)"
+msgstr "(pas de description disponible)"
+
+#: libbrux/cmd/help.c:42
+msgid ""
+"\n"
+"Type \"help COMMAND\" for details about a particular command.\n"
+msgstr ""
+"\n"
+"Taper \"help COMMANDE\" pour des détails au sujet d'une commande particulière.\n"
+
+#: libbrux/cmd/help.c:66
+#, c-format
+msgid ""
+"Usage: %s [COMMAND]\n"
+"Print short help for COMMAND, or list of available commands.\n"
+msgstr ""
+"Usage: %s [COMMANDE]\n"
+"Afficher une aide sommaire de la COMMANDE ou lister les commandes disponibles.\n"
+
+#: libbrux/cmd/help.c:73
+msgid "display this help"
+msgstr "afficher l'aide-mémoire"
+
+#: libbrux/cmd/quit.c:44
+#, c-format
+msgid ""
+"Usage: %s\n"
+"Exit from %s.\n"
+msgstr ""
+"Usage: %s\n"
+"Quitter à partir de %s.\n"
+
+#: libbrux/cmd/quit.c:51
+msgid "exit and terminate this session"
+msgstr "quitter et terminer la session"
+
+#: libbrux/flash/amd.c:180
+msgid ""
+"Chip: AMD Flash\n"
+"\tManufacturer: "
+msgstr ""
+"Module: AMD Flash\n"
+"\tManufacturier: "
+
+#: libbrux/flash/amd.c:183
+msgid "AMD"
+msgstr "AMD"
+
+#: libbrux/flash/amd.c:186
+#, c-format
+msgid "Unknown manufacturer (ID 0x%04x)"
+msgstr "Manufacturier inconnu (ID 0x%04x)"
+
+#: libbrux/flash/amd.c:189
+msgid ""
+"\n"
+"\tChip: "
+msgstr ""
+"\n"
+"\tModule: "
+
+#: libbrux/flash/amd.c:192
+msgid "Am29LV640D/Am29LV641D/Am29LV642D"
+msgstr "Am29LV640D/Am29LV641D/Am29LV642D"
+
+#: libbrux/flash/amd.c:195
+msgid "Am29LV800B"
+msgstr "Am29LV800B"
+
+#: libbrux/flash/amd.c:198
+#, c-format
+msgid "Unknown (ID 0x%04x)"
+msgstr "Inconnu (ID 0x%04x)"
+
+#: libbrux/flash/amd.c:201
+#, c-format
+msgid ""
+"\n"
+"\tProtected: %04x\n"
+msgstr ""
+"\n"
+"\tProtégé: %04x\n"
+
+#: libbrux/flash/amd.c:268 libbrux/flash/amd.c:280 libbrux/flash/amd.c:292
+#: libbrux/flash/detectflash.c:84 libbrux/flash/detectflash.c:114
+msgid "AMD/Fujitsu Standard Command Set"
+msgstr "AMD/Fujitsu Jeu standard de commandes"
+
+#: libbrux/flash/amd.c:269
+msgid "supported: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit"
+msgstr "supportés: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit"
+
+#: libbrux/flash/amd.c:281
+msgid "supported: AMD 29LV800B; 1x16 Bit"
+msgstr "supportés: AMD 29LV800B; 1x16 Bit"
+
+#: libbrux/flash/amd.c:293
+msgid "supported: AMD 29LV160; 1x8 Bit"
+msgstr "supportés: AMD 29LV160; 1x8 Bit"
+
+#: libbrux/flash/detectflash.c:53 src/readmem.c:54
+msgid "Error: Missing bus driver!\n"
+msgstr "Erreur: pilote de bus manquant!\n"
+
+#: libbrux/flash/detectflash.c:64 src/flash.c:100
+msgid "Flash not found!\n"
+msgstr "Flash non détecté!\n"
+
+#: libbrux/flash/detectflash.c:74
+msgid "Query identification string:\n"
+msgstr "Chaîne de requêtre d'identification:\n"
+
+#: libbrux/flash/detectflash.c:78 libbrux/flash/detectflash.c:108
+msgid "null"
+msgstr "nul"
+
+#: libbrux/flash/detectflash.c:81 libbrux/flash/detectflash.c:111
+msgid "Intel/Sharp Extended Command Set"
+msgstr "Jeu étendu de commandes Intel/Sharp"
+
+#: libbrux/flash/detectflash.c:87 libbrux/flash/detectflash.c:117
+#: libbrux/flash/intel.c:327 libbrux/flash/intel.c:339
+#: libbrux/flash/intel.c:351
+msgid "Intel Standard Command Set"
+msgstr "Jeu standard de commandes Intel"
+
+#: libbrux/flash/detectflash.c:90 libbrux/flash/detectflash.c:120
+msgid "AMD/Fujitsu Extended Command Set"
+msgstr "Jeu étendu de commandes AMD/Fujitsu"
+
+#: libbrux/flash/detectflash.c:93 libbrux/flash/detectflash.c:123
+msgid "Mitsubishi Standard Command Set"
+msgstr "Jeu standard de commandes Mitsubishi"
+
+#: libbrux/flash/detectflash.c:96 libbrux/flash/detectflash.c:126
+msgid "Mitsubishi Extended Command Set"
+msgstr "Jeu étendu de commandes Mitsubishi"
+
+#: libbrux/flash/detectflash.c:99 libbrux/flash/detectflash.c:129
+msgid "Page Write Command Set"
+msgstr "Jeu de commande d'écriture de page"
+
+#: libbrux/flash/detectflash.c:102 libbrux/flash/detectflash.c:132
+#: libbrux/flash/detectflash.c:176
+msgid "unknown!!!"
+msgstr "inconnu!!!"
+
+#: libbrux/flash/detectflash.c:105
+#, c-format
+msgid "\tPrimary Algorithm Command Set and Control Interface ID Code: 0x%04X (%s)\n"
+msgstr "\tJeu de commandes Primary Algorithm et Code ID de contrôle d'interface: 0x%04X (%s)\n"
+
+#: libbrux/flash/detectflash.c:135
+#, c-format
+msgid "\tAlternate Algorithm Command Set and Control Interface ID Code: 0x%04X (%s)\n"
+msgstr "\tJeu alternatif de commandes Primary Algorithm et Code ID de contrôle d'interface: 0x%04X (%s)\n"
+
+#: libbrux/flash/detectflash.c:138
+msgid "Query system interface information:\n"
+msgstr "Requête d'information d'interface système:\n"
+
+#: libbrux/flash/detectflash.c:139
+#, c-format
+msgid "\tVcc Logic Supply Minimum Write/Erase or Write voltage: %d mV\n"
+msgstr "\tVcc logique Puissance minimum Écri/Efface ou Voltage d'écriture: %d mV\n"
+
+#: libbrux/flash/detectflash.c:140
+#, c-format
+msgid "\tVcc Logic Supply Maximum Write/Erase or Write voltage: %d mV\n"
+msgstr "\tVcc logique Puissance maximum Écri/Efface ou Voltage d'écriture: %d mV\n"
+
+#: libbrux/flash/detectflash.c:141
+#, c-format
+msgid "\tVpp [Programming] Supply Minimum Write/Erase voltage: %d mV\n"
+msgstr "\tVpp [Programmation] puissance minimum Écriture/Efface voltage: %d mV\n"
+
+#: libbrux/flash/detectflash.c:142
+#, c-format
+msgid "\tVpp [Programming] Supply Maximum Write/Erase voltage: %d mV\n"
+msgstr "\tVpp [Programmation] puissance maximum Écriture/Efface voltage: %d mV\n"
+
+#: libbrux/flash/detectflash.c:143
+#, c-format
+msgid "\tTypical timeout per single byte/word program: %d us\n"
+msgstr "\tDélai d'expiration typique par programme simple octet/mot: %d us\n"
+
+#: libbrux/flash/detectflash.c:144
+#, c-format
+msgid "\tTypical timeout for maximum-size multi-byte program: %d us\n"
+msgstr "\tDélai d'expiration typique pour la taille maximale par programme multi-octets: %d us\n"
+
+#: libbrux/flash/detectflash.c:145
+#, c-format
+msgid "\tTypical timeout per individual block erase: %d ms\n"
+msgstr "\tDélai d'expiration typique par effacement individuel de blocs: %d ms\n"
+
+#: libbrux/flash/detectflash.c:146
+#, c-format
+msgid "\tTypical timeout for full chip erase: %d ms\n"
+msgstr "\tDélai d'expiration typique pour un effacement complet du module: %d ms\n"
+
+#: libbrux/flash/detectflash.c:147
+#, c-format
+msgid "\tMaximum timeout for byte/word program: %d us\n"
+msgstr "\tDélai d'expiration maximal pour un programme octer/mot: %d us\n"
+
+#: libbrux/flash/detectflash.c:148
+#, c-format
+msgid "\tMaximum timeout for multi-byte program: %d us\n"
+msgstr "\tDélai d'expiration maximum pour programme multi-octets: %d us\n"
+
+#: libbrux/flash/detectflash.c:149
+#, c-format
+msgid "\tMaximum timeout per individual block erase: %d ms\n"
+msgstr "\tDélai d'expiration maximum par effacement individuel de blocs: %d ms\n"
+
+#: libbrux/flash/detectflash.c:150
+#, c-format
+msgid "\tMaximum timeout for chip erase: %d ms\n"
+msgstr "\tDélai d'expiration maximum pour un effacement complet du module: %d ms\n"
+
+#: libbrux/flash/detectflash.c:153
+msgid "Device geometry definition:\n"
+msgstr "Définition de la géométrie du périphérique:\n"
+
+#: libbrux/flash/detectflash.c:154
+#, c-format
+msgid "\tDevice Size: %d B (%d KiB, %d MiB)\n"
+msgstr "\tTaille du périphérique: %d O (%d KiB, %d MiB)\n"
+
+#: libbrux/flash/detectflash.c:161
+msgid "x8"
+msgstr "x8"
+
+#: libbrux/flash/detectflash.c:164
+msgid "x16"
+msgstr "x16"
+
+#: libbrux/flash/detectflash.c:167
+msgid "x8/x16"
+msgstr "x8/x16"
+
+#: libbrux/flash/detectflash.c:170
+msgid "x32"
+msgstr "x32"
+
+#: libbrux/flash/detectflash.c:173
+msgid "x16/x32"
+msgstr "x16/x32"
+
+#: libbrux/flash/detectflash.c:179
+#, c-format
+msgid "\tFlash Device Interface Code description: 0x%04X (%s)\n"
+msgstr "\tDescription du code de l'interface du module: 0x%04X (%s)\n"
+
+#: libbrux/flash/detectflash.c:180
+#, c-format
+msgid "\tMaximum number of bytes in multi-byte program: %d\n"
+msgstr "\tNombre maximum d'octets d'un programme multi-octest: %d\n"
+
+#: libbrux/flash/detectflash.c:181
+#, c-format
+msgid "\tNumber of Erase Block Regions within device: %d\n"
+msgstr "\tNumbre de régions de blocs d'effacement à l'intérieur du périphérique: %d\n"
+
+#: libbrux/flash/detectflash.c:182
+msgid "\tErase Block Region Information:\n"
+msgstr "\tInformation sur la région du bloc d'effacement:\n"
+
+#: libbrux/flash/detectflash.c:187
+#, c-format
+msgid "\t\tRegion %d:\n"
+msgstr "\t\tRégion %d:\n"
+
+#: libbrux/flash/detectflash.c:188
+#, c-format
+msgid "\t\t\tErase Block Size: %d B (%d KiB)\n"
+msgstr "\t\t\tTaille du bloc d'effacement: %d B (%d KiB)\n"
+
+#: libbrux/flash/detectflash.c:191
+#, c-format
+msgid "\t\t\tNumber of Erase Blocks: %d\n"
+msgstr "\t\t\tNombre de blocs d'effacement: %d\n"
+
+#: libbrux/flash/intel.c:104
+#, c-format
+msgid "Manufacturer: %s\n"
+msgstr "Manufacturier: %s\n"
+
+#: libbrux/flash/intel.c:107
+#, c-format
+msgid "Unknown manufacturer (0x%04X)!\n"
+msgstr "Manufacturier inconnu (0x%04X)!\n"
+
+#: libbrux/flash/intel.c:111
+msgid "Chip: "
+msgstr "Module: "
+
+#: libbrux/flash/intel.c:142
+#, c-format
+msgid "Unknown (0x%02X)!\n"
+msgstr "Inconnu (0x%02X)!\n"
+
+#: libbrux/flash/intel.c:201
+msgid "flash: invalid command seq\n"
+msgstr "flash: séquence de commande invalide\n"
+
+#: libbrux/flash/intel.c:204
+msgid "flash: low vpen\n"
+msgstr "flash: vpen bas\n"
+
+#: libbrux/flash/intel.c:207
+msgid "flash: block locked\n"
+msgstr "flash: bloc verrouillé\n"
+
+#: libbrux/flash/intel.c:229
+msgid "flash: unknown error while unblocking\n"
+msgstr "flash: erreur inconnue lors du déverrouillage\n"
+
+#: libbrux/flash/intel.c:248
+msgid "flash: unknown error while programming\n"
+msgstr "flash: erreur inconnue lors de la programmation\n"
+
+#: libbrux/flash/intel.c:328
+msgid "supported: 28Fxxxx, 2 x 16 bit"
+msgstr "supportés: 28Fxxxx, 2 x 16 bit"
+
+#: libbrux/flash/intel.c:340
+msgid "supported: 28Fxxxx, 1 x 16 bit"
+msgstr "supportés: 28Fxxxx, 1 x 16 bit"
+
+#: libbrux/flash/intel.c:352
+msgid "supported: 28Fxxxx, 1 x 8 bit"
+msgstr "supportés: 28Fxxxx, 1 x 8 bit"
+
+#: src/bus/bcm1250.c:104
+#, c-format
+msgid "Broadcom BCM1250 compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "Pilote de bus compatible Broadcom BCM1250 via BSR (JTAG No de pièce %d)\n"
+
+#: src/bus/bcm1250.c:275
+msgid "Broadcom BCM1250 compatible bus driver via BSR"
+msgstr "pilote de bus compatible Broadcom BCM1250 via BSR"
+
+#: src/bus/bcm1250.c:317 src/bus/bcm1250.c:326 src/bus/bcm1250.c:333
+#: src/bus/bcm1250.c:338 src/bus/bcm1250.c:343 src/bus/ixp425.c:280
+#: src/bus/ixp425.c:289 src/bus/ixp425.c:298 src/bus/ixp425.c:305
+#: src/bus/ixp425.c:310 src/bus/pxa2x0.c:386 src/bus/pxa2x0.c:395
+#: src/bus/pxa2x0.c:404 src/bus/pxa2x0.c:413 src/bus/pxa2x0.c:420
+#: src/bus/pxa2x0.c:425 src/bus/pxa2x0.c:430 src/bus/pxa2x0.c:435
+#: src/bus/s3c4510x.c:339 src/bus/s3c4510x.c:348 src/bus/s3c4510x.c:357
+#: src/bus/s3c4510x.c:366 src/bus/s3c4510x.c:373 src/bus/sa1110.c:294
+#: src/bus/sa1110.c:303 src/bus/sa1110.c:312 src/bus/sa1110.c:319
+#: src/bus/sa1110.c:324 src/bus/sa1110.c:329 src/bus/sh7727.c:326
+#: src/bus/sh7727.c:335 src/bus/sh7727.c:346 src/bus/sh7727.c:355
+#: src/bus/sh7727.c:362 src/bus/sh7727.c:367 src/bus/sh7727.c:372
+#: src/bus/sh7727.c:377 src/bus/sh7750r.c:308 src/bus/sh7750r.c:317
+#: src/bus/sh7750r.c:326 src/bus/sh7750r.c:335 src/bus/sh7750r.c:342
+#: src/bus/sh7750r.c:347 src/bus/sh7750r.c:352 src/bus/sh7750r.c:357
+#: src/bus/sh7751r.c:301 src/bus/sh7751r.c:310 src/bus/sh7751r.c:319
+#: src/bus/sh7751r.c:328 src/bus/sh7751r.c:335 src/bus/sh7751r.c:340
+#: src/cmd/get.c:63 src/cmd/set.c:77
+#, c-format
+msgid "signal '%s' not found\n"
+msgstr "signal '%s' non repéré\n"
+
+#: src/bus/buses.c:69 src/cmd/include.c:47 src/detect.c:252 src/jtag.c:159
+#: src/jtag.c:270
+msgid "Out of memory\n"
+msgstr "Mémoire épuisée\n"
+
+#: src/bus/ixp425.c:125
+#, c-format
+msgid "Intel IXP425 compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Intel IXP425 via BSR (JTAG No de pièce %d)\n"
+
+#: src/bus/ixp425.c:238
+msgid "Intel IXP425 compatible bus driver via BSR"
+msgstr "pilote de bus compatible Intel IXP425 via BSR"
+
+#: src/bus/pxa2x0.c:119
+#, c-format
+msgid "Intel PXA2x0 compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Intel PXA2x0 via BSR (JTAG No de pièce %d)\n"
+
+#: src/bus/pxa2x0.c:278
+msgid "Static Chip Select 0"
+msgstr "Sélection statique du module 0"
+
+#: src/bus/pxa2x0.c:317
+msgid "Memory Mapped registers (Memory Ctl)"
+msgstr "Registres mémoire mappé (Ctl Mémoire)"
+
+#: src/bus/pxa2x0.c:344
+msgid "Intel PXA2x0 compatible bus driver via BSR"
+msgstr "pilote de bus compatible Intel PXA2x0 via BSR"
+
+#: src/bus/s3c4510x.c:128
+#, c-format
+msgid "Samsung S3C4510B compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Samsung S3C4510B via BSR (JTAG no de pièce %d)\n"
+
+#: src/bus/s3c4510x.c:297
+msgid "Samsung S3C4510B compatible bus driver via BSR"
+msgstr "pilote de bus compatible Samsung S3C4510B via BSR"
+
+#: src/bus/sa1110.c:108
+#, c-format
+msgid "Intel SA-1110 compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Intel SA-1110 via BSR (JTAG no de pièce %d)\n"
+
+#: src/bus/sa1110.c:252
+msgid "Intel SA-1110 compatible bus driver via BSR"
+msgstr "pilote de bus compatible Intel SA-1110 via BSR"
+
+#: src/bus/sh7727.c:109
+#, c-format
+msgid "Hitachi SH7727 compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Hitachi SH7727 via BSR (JTAG no de pièce %d)\n"
+
+#: src/bus/sh7727.c:267
+msgid "Error: Invalid bus width (MD3 = MD4 = 0)!\n"
+msgstr "ERREUR: largeur de bus invalide (MD3 = MD4 = 0)!\n"
+
+#: src/bus/sh7727.c:284
+msgid "Hitachi SH7727 compatible bus driver via BSR"
+msgstr "pilote de bus compatible Hitachi SH7727 via BSR"
+
+#: src/bus/sh7750r.c:101
+#, c-format
+msgid "Hitachi SH7750R compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Hitachi SH7750R via BSR (JTAG no de pièce %d)\n"
+
+#: src/bus/sh7750r.c:266
+msgid "Hitachi SH7750R compatible bus driver via BSR"
+msgstr "pilote de bus compatible Hitachi SH7750R via BSR"
+
+#: src/bus/sh7751r.c:99
+#, c-format
+msgid "Hitachi SH7751R compatible bus driver via BSR (JTAG part No. %d)\n"
+msgstr "pilote de bus compatible Hitachi SH7751R via BSR (JTAG no de pièce %d)\n"
+
+#: src/bus/sh7751r.c:259
+msgid "Hitachi SH7751R compatible bus driver via BSR"
+msgstr "pilote de bus compatible Hitachi SH7751R via BSR"
+
+#: src/cmd/bit.c:52 src/cmd/bus.c:46 src/cmd/dr.c:48 src/cmd/get.c:52
+#: src/cmd/initbus.c:46 src/cmd/instruction.c:44 src/cmd/part.c:46
+#: src/cmd/print.c:56 src/cmd/register.c:50 src/cmd/set.c:53
+#: src/cmd/signal.c:49
+msgid "Run \"detect\" first.\n"
+msgstr "Eéxcuer \"détecter\" d'abord.\n"
+
+#: src/cmd/bit.c:57 src/cmd/dr.c:53 src/cmd/get.c:57 src/cmd/initbus.c:51
+#: src/cmd/instruction.c:49 src/cmd/register.c:55 src/cmd/set.c:58
+#: src/cmd/signal.c:54
+#, c-format
+msgid "%s: no active part\n"
+msgstr "%s: aucune partie active\n"
+
+#: src/cmd/bit.c:64
+msgid "missing Boundary Scan Register (BSR)\n"
+msgstr "registre Boundary Scan Register (BSR) manquant\n"
+
+#: src/cmd/bit.c:73
+msgid "invalid boundary bit number\n"
+msgstr "numéro de bit de limite invalide\n"
+
+#: src/cmd/bit.c:77
+msgid "duplicate bit declaration\n"
+msgstr "déclaration double de bit\n"
+
+#: src/cmd/bit.c:114 src/cmd/instruction.c:95 src/cmd/register.c:71
+#: src/cmd/register.c:85 src/cmd/signal.c:66 src/detect.c:194 src/detect.c:217
+msgid "out of memory\n"
+msgstr "mémoire épuisée\n"
+
+#: src/cmd/bit.c:126
+msgid "invalid control bit number\n"
+msgstr "numéro de bit de contrôle invalide\n"
+
+#: src/cmd/bit.c:148
+#, c-format
+msgid ""
+"Usage: %s NUMBER TYPE DEFAULT SIGNAL [CBIT CVAL CSTATE]\n"
+"Define new BSR (Boundary Scan Register) bit for SIGNAL, with\n"
+"DEFAULT value.\n"
+"\n"
+"NUMBER        Bit number in the BSR\n"
+"TYPE          Bit type, valid values are I, O, B, C, and X\n"
+"DEFAULT       Default (safe) bit value, valid values are 1, 0, ?\n"
+"SIGNAL        Associated signal name\n"
+"CBIT          Control bit number\n"
+"CVAL          Control value\n"
+"CSTATE        Control state, valid state is only Z\n"
+msgstr ""
+"Usage: %s NUMÉRO TYPE DÉFAUT SIGNAL [BITC VALC ÉTATC]\n"
+"Définir le nouveau bit du registre BSR (Boundary Scan Register) pour le SIGNAL, avec\n"
+"la valeur par DÉFAUT.\n"
+"\n"
+"NUMÉRO        numéro du bit du BSR\n"
+"TYPE          type de bit, valeurs permises: I, O, B, C et X\n"
+"DÉFAUT        valeur du bit par défaut (sûre), valeurs permises:  1, 0, ?\n"
+"SIGNAL        nom du signal associé\n"
+"BITC          numéro de bit de contrôle\n"
+"VALC          valeur de contrôle\n"
+"ÉTATC         état de contrôle, état permis est seulement Z\n"
+
+#: src/cmd/bit.c:164
+msgid "define new BSR bit"
+msgstr "définir un nouveau bit BSR"
+
+#: src/cmd/bus.c:54
+#, c-format
+msgid "%s: invalid bus number\n"
+msgstr "%s: numéro de bus invalide\n"
+
+#: src/cmd/bus.c:67
+#, c-format
+msgid ""
+"Usage: %s BUS\n"
+"Change active bus.\n"
+"\n"
+"BUS           bus number\n"
+msgstr ""
+"Usage: %s BUS\n"
+"Changer le bus actif.\n"
+"\n"
+"BUS           numéro de bus\n"
+
+#: src/cmd/bus.c:76
+msgid "change active bus"
+msgstr "changer le bus actif"
+
+#: src/cmd/cable.c:53
+#, c-format
+msgid "Unknown connection type: %s\n"
+msgstr "Type de connexion inconnue: %s\n"
+
+#: src/cmd/cable.c:64
+msgid "Error: Cable connection failed!\n"
+msgstr "Error: échec de la connexion par cable!\n"
+
+#: src/cmd/cable.c:69
+msgid "Error: Cable initialization failed!\n"
+msgstr "Error: échec de l'initialisation par cable!\n"
+
+#: src/cmd/cable.c:86
+#, c-format
+msgid ""
+"Usage: %s PORTADDR CABLE\n"
+"Usage: %s DEV CABLE\n"
+"Select JTAG cable connected to parallel port.\n"
+"\n"
+"PORTADDR   parallel port address (e.g. 0x378)\n"
+"CABLE      cable type\n"
+"DEV        ppdev device (e.g. /dev/parport0)\n"
+"\n"
+"List of supported cables:\n"
+"%-13s No cable connected\n"
+msgstr ""
+"Usage: %s ADDR_PORT CABLE\n"
+"Usage: %s PÉRIPHÉRIQUE CABLE\n"
+"Sélectionner le cable JTAG connecté au port parallèle.\n"
+"\n"
+"ADDR_PORT  adresse du port parallèle (i.e. 0x378)\n"
+"CABLE      type de cable\n"
+"PÉR        PÉRiphérique (i.e. /dev/parport0)\n"
+"\n"
+"Lists des cables supportés:\n"
+"%-13s Aucun cable connecté\n"
+
+#: src/cmd/cable.c:104
+msgid "select JTAG cable"
+msgstr "sélectionner le cable JTAG"
+
+#: src/cmd/cmd.c:99
+#, c-format
+msgid "Error: Cable not configured. Please use '%s' command first!\n"
+msgstr "ERREUR: cable non configuré. SVP utiliser la commande '%s' d'abord!\n"
+
+#: src/cmd/detect.c:68
+#, c-format
+msgid ""
+"Usage: %s\n"
+"Detect parts on the JTAG chain.\n"
+"\n"
+"Output from this command is a list of the detected parts.\n"
+"If no parts are detected other commands may not work properly.\n"
+msgstr ""
+"Usage: %s\n"
+"Détecter les pièces sur la chaîne JTAG.\n"
+"\n"
+"La sortie de cette commande est une liste de pièces détectées.\n"
+"Si aucune pièce n'est détectée, les autres commandes peuvent ne pas fonctionner correctement.\n"
+
+#: src/cmd/detect.c:78
+msgid "detect parts on the JTAG chain"
+msgstr "pièces détectés sur la caîne JTAG"
+
+#: src/cmd/discovery.c:51
+#, c-format
+msgid ""
+"Usage: %s\n"
+"Discovery of unknown parts in the JTAG chain.\n"
+"\n"
+"'%s' attempts to detect these parameters of an unknown JTAG\n"
+"chain:\n"
+" 1. IR (instruction register) length\n"
+" 2. DR (data register) length for all possible instructions\n"
+"\n"
+"Warning: This may be dangerous for some parts (especially if the\n"
+"part doesn't have TRST signal).\n"
+msgstr ""
+"Usage: %s\n"
+"Découvrir les pièces inconnues sur la chaîne JTAG.\n"
+"\n"
+"'%s' tentatives pour détecter ces paramètres sur une chaîne JTAG inconnue:\n"
+" 1. IR (registre d'instruction register) longueur\n"
+" 2. DR (registre de données) longueurs de toutes les instructions possibles\n"
+"\n"
+"AVERTISSMENT: ceci peut être dangereus pour certaintes pièces (spécialement si celles-ci\n"
+"n'ont pas de signal TRST).\n"
+
+#: src/cmd/discovery.c:66
+msgid "discovery of unknown parts in the JTAG chain"
+msgstr "découverte des pièces inconnues dans la chaîne JTAG"
+
+#: src/cmd/dr.c:67
+#, c-format
+msgid "%s: part without active instruction\n"
+msgstr "%s: pièces sans instruction active\n"
+
+#: src/cmd/dr.c:71
+#, c-format
+msgid "%s: part without active data register\n"
+msgstr "%s: pièces sans registre actif de données\n"
+
+#: src/cmd/dr.c:79
+#, c-format
+msgid "%s\n"
+msgstr "%s\n"
+
+#: src/cmd/dr.c:88
+#, c-format
+msgid ""
+"Usage: %s [DIR]\n"
+"Display input or output data register content.\n"
+"\n"
+"DIR           requested data register; possible values: 'in' for\n"
+"                input and 'out' for output; default is 'out'\n"
+msgstr ""
+"Usage: %s [DIR]\n"
+"Afficher le contenu des registres d'entrée et de sortie de données.\n"
+"\n"
+"DIR           registre de données interrogé; valeurs possibles: 'in' pour\n"
+"                l'entrée et 'out' pour la sortie; par défaut 'out'\n"
+
+#: src/cmd/dr.c:98
+msgid "display active data register for a part"
+msgstr "afficher le registre actif de données pour un pièce"
+
+#: src/cmd/endian.c:42
+msgid "Endianess for external files: big\n"
+msgstr ""
+
+#: src/cmd/endian.c:44
+msgid "Endianess for external files: little\n"
+msgstr ""
+
+#: src/cmd/endian.c:65
+#, c-format
+msgid ""
+"Usage: %s\n"
+"Set or print endianess for external files.\n"
+msgstr ""
+
+#: src/cmd/endian.c:72
+msgid "set/print endianess"
+msgstr ""
+
+#: src/cmd/eraseflash.c:65
+#, c-format
+msgid ""
+"Usage: %s ADDR BLOCKS\n"
+"Erase flash memory from ADDR.\n"
+"\n"
+"ADDR       target addres for erasing block\n"
+"BLOCKS     number of blocks to erase\n"
+"\n"
+"ADDR and BLOCKS could be in decimal or hexadecimal (prefixed with 0x) form.\n"
+"\n"
+"Supported Flash Memories:\n"
+msgstr ""
+"Usage: %s ADR BLOCS\n"
+"Effacer la mémoire flash à partir de l'ADResse.\n"
+"\n"
+"ADR        ADRessse cible pour effacer un bloc\n"
+"BLOCS      numbre de blocs à effacer\n"
+"\n"
+"ADR et BLOCS peuvent être en valeur décimal ou hexadécimal (préfixé avec 0x).\n"
+"\n"
+"Mémoires flash supportées:\n"
+
+#: src/cmd/eraseflash.c:77 src/cmd/flashmem.c:89
+#, c-format
+msgid ""
+"%s\n"
+"     %s\n"
+msgstr ""
+"%s\n"
+"     %s\n"
+
+#: src/cmd/eraseflash.c:82
+msgid "erase flash memory by number of blocks"
+msgstr "effacer la mémoire flahs par numéro de bloc"
+
+#: src/cmd/flashmem.c:57 src/cmd/include.c:54 src/cmd/script.c:43
+#: src/jtag.c:280
+#, c-format
+msgid "Unable to open file `%s'!\n"
+msgstr "Incapable d'ouvrir le fichier `%s'!\n"
+
+#: src/cmd/flashmem.c:75
+#, c-format
+msgid ""
+"Usage: %s ADDR FILENAME\n"
+"Usage: %s FILENAME\n"
+"Program FILENAME content to flash memory.\n"
+"\n"
+"ADDR       target address for raw binary image\n"
+"FILENAME   name of the input file\n"
+"%-10s FILENAME is in MS .bin format (for WinCE)\n"
+"\n"
+"ADDR could be in decimal or hexadecimal (prefixed with 0x) form.\n"
+"\n"
+"Supported Flash Memories:\n"
+msgstr ""
+"Usage: %s ADR FICHIER\n"
+"Usage: %s FICHIER\n"
+"Programmer le contenu de la mémoire flash avec le FICHIER.\n"
+"\n"
+"ADR        ADResse cible d'une image binaire brute\n"
+"FICHIER    nom du FICHIER d'entrée\n"
+"%-10s FICHIER est un format MS .bin (pour WinCE)\n"
+"\n"
+"ADR et BLOCS peuvent être en valeur décimal ou hexadécimal (préfixé avec 0x).\n"
+"\n"
+"Mémoires flahs supportées:\n"
+
+#: src/cmd/flashmem.c:94
+msgid "burn flash memory with data from a file"
+msgstr "brûler la mémoire flahs avec les données à partir d'un fichier"
+
+#: src/cmd/frequency.c:39
+#, c-format
+msgid "Current TCK frequency is %u Hz\n"
+msgstr ""
+
+#: src/cmd/frequency.c:49
+#, c-format
+msgid "Setting TCK frequency to %u Hz\n"
+msgstr ""
+
+#: src/cmd/frequency.c:59
+#, c-format
+msgid ""
+"Usage: %s [FREQ]\n"
+"Change TCK frequency to FREQ or print current TCK frequency.\n"
+"\n"
+"FREQ is in hertz. It's a maximum TCK frequency for JTAG interface.\n"
+"In some cases the TCK frequency is less than FREQ, but the frequency\n"
+"is never more than FREQ. Maximum supported frequency depends on JTAG\n"
+"adapter.\n"
+"\n"
+"FREQ must be an unsigned integer. Minimum allowed frequency is 1 Hz.\n"
+"Use 0 for FREQ to disable frequency limit.\n"
+msgstr ""
+
+#: src/cmd/frequency.c:74
+msgid "setup JTAG frequency"
+msgstr ""
+
+#: src/cmd/get.c:68
+#, c-format
+msgid "%s = %d\n"
+msgstr ""
+
+#: src/cmd/get.c:77
+#, c-format
+msgid ""
+"Usage: %s SIGNAL\n"
+"Get signal state from output BSR (Boundary Scan Register).\n"
+"\n"
+"SIGNAL        signal name (from JTAG declaration file)\n"
+msgstr ""
+
+#: src/cmd/get.c:86
+msgid "get external signal value"
+msgstr ""
+
+#: src/cmd/include.c:65
+#, c-format
+msgid ""
+"Usage: %s FILENAME\n"
+"Run command sequence from external FILENAME from the repository.\n"
+"\n"
+"FILENAME      Name of the file with commands\n"
+msgstr ""
+
+#: src/cmd/include.c:74
+msgid "include command sequence from external repository"
+msgstr ""
+
+#: src/cmd/initbus.c:59
+msgid "bus initialization failed!\n"
+msgstr ""
+
+#: src/cmd/initbus.c:67
+#, c-format
+msgid "Unknown bus: %s\n"
+msgstr ""
+
+#: src/cmd/initbus.c:78
+#, c-format
+msgid ""
+"Usage: %s BUSNAME\n"
+"Initialize new bus driver for active part.\n"
+"\n"
+"BUSNAME       Name of the bus\n"
+"\n"
+"List of available buses:\n"
+msgstr ""
+
+#: src/cmd/initbus.c:87
+#, c-format
+msgid "%-10s %s\n"
+msgstr ""
+
+#: src/cmd/initbus.c:92
+msgid "initialize bus driver for active part"
+msgstr ""
+
+#: src/cmd/instruction.c:58
+#, c-format
+msgid "%s: unknown instruction '%s'\n"
+msgstr ""
+
+#: src/cmd/instruction.c:69
+msgid "instruction length is already set and used\n"
+msgstr ""
+
+#: src/cmd/instruction.c:84
+msgid "invalid instruction length\n"
+msgstr ""
+
+#: src/cmd/instruction.c:89
+#, c-format
+msgid "Instruction '%s' already defined\n"
+msgstr ""
+
+#: src/cmd/instruction.c:104
+#, c-format
+msgid "unknown data register '%s'\n"
+msgstr ""
+
+#: src/cmd/instruction.c:118
+#, c-format
+msgid ""
+"Usage: %s INSTRUCTION\n"
+"Usage: %s length LENGTH\n"
+"Usage: %s INSTRUCTION CODE REGISTER\n"
+"Change active INSTRUCTION for a part or declare new instruction.\n"
+"\n"
+"INSTRUCTION   instruction name (e.g. BYPASS)\n"
+"LENGTH        common instruction length\n"
+"CODE          instruction code (e.g. 11111)\n"
+"REGISTER      default data register for instruction (e.g. BR)\n"
+msgstr ""
+
+#: src/cmd/instruction.c:132
+msgid "change active instruction for a part or declare new instruction"
+msgstr ""
+
+#: src/cmd/part.c:54
+#, c-format
+msgid "%s: invalid part number\n"
+msgstr ""
+
+#: src/cmd/part.c:67
+#, c-format
+msgid ""
+"Usage: %s PART\n"
+"Change active part for current JTAG chain.\n"
+"\n"
+"PART          part number\n"
+msgstr ""
+
+#: src/cmd/part.c:76
+msgid "change active part for current JTAG chain"
+msgstr ""
+
+#: src/cmd/peekpoke.c:53
+#, c-format
+msgid "bus_read(0x%08x) = 0x%08X (%i)\n"
+msgstr ""
+
+#: src/cmd/peekpoke.c:62
+#, c-format
+msgid ""
+"Usage: %s ADDR\n"
+"Read a single word (bus width size).\n"
+"\n"
+"ADDR       address to read from\n"
+"\n"
+"ADDR could be in decimal or hexadecimal (prefixed with 0x) form.\n"
+"\n"
+msgstr ""
+
+#: src/cmd/peekpoke.c:74
+msgid "read a single word"
+msgstr ""
+
+#: src/cmd/peekpoke.c:105
+#, c-format
+msgid ""
+"Usage: %s ADDR VAL\n"
+"Write a single word (bus width size).\n"
+"\n"
+"ADDR       address to write\n"
+"VAL        value to write\n"
+"\n"
+"ADDR and VAL could be in decimal or hexadecimal (prefixed with 0x) form.\n"
+"\n"
+msgstr ""
+
+#: src/cmd/peekpoke.c:118
+msgid "write a single word"
+msgstr ""
+
+#: src/cmd/print.c:68
+#, c-format
+msgid " No. %%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n"
+msgstr ""
+
+#: src/cmd/print.c:72 src/cmd/print.c:75 src/cmd/print.c:79
+#, c-format
+msgid "(%d) String conversion failed!\n"
+msgstr ""
+
+#: src/cmd/print.c:73 src/cmd/print.c:77
+msgid "Manufacturer"
+msgstr ""
+
+#: src/cmd/print.c:73 src/cmd/print.c:77
+msgid "Part"
+msgstr ""
+
+#: src/cmd/print.c:73 src/cmd/print.c:77
+msgid "Stepping"
+msgstr ""
+
+#: src/cmd/print.c:73 src/cmd/print.c:77
+msgid "Instruction"
+msgstr ""
+
+#: src/cmd/print.c:73 src/cmd/print.c:77
+msgid "Register"
+msgstr ""
+
+#: src/cmd/print.c:90 src/part/part.c:309
+#, c-format
+msgid " %3d "
+msgstr ""
+
+#: src/cmd/print.c:101
+#, c-format
+msgid ""
+"\n"
+"Active bus:\n"
+"*%d: "
+msgstr ""
+
+#: src/cmd/print.c:106
+#, c-format
+msgid "Error in bus area discovery at 0x%08llX\n"
+msgstr ""
+
+#: src/cmd/print.c:111
+#, c-format
+msgid "\tstart: 0x%08X, length: 0x%08llX, data width: %d bit, (%s)\n"
+msgstr ""
+
+#: src/cmd/print.c:113
+#, c-format
+msgid "\tstart: 0x%08X, length: 0x%08llX, data width: %d bit\n"
+msgstr ""
+
+#: src/cmd/print.c:128
+#, c-format
+msgid "*%d: "
+msgstr ""
+
+#: src/cmd/print.c:130
+#, c-format
+msgid "%d: "
+msgstr ""
+
+#: src/cmd/print.c:141
+#, c-format
+msgid ""
+"Usage: %s [chain|bus]\n"
+"Display JTAG chain status.\n"
+"\n"
+"Display list of the parts connected to the JTAG chain including\n"
+"part number and current (active) instruction and data register.\n"
+msgstr ""
+
+#: src/cmd/print.c:151
+msgid "display JTAG chain list/status"
+msgstr ""
+
+#: src/cmd/readmem.c:54
+#, c-format
+msgid "Unable to create file `%s'!\n"
+msgstr ""
+
+#: src/cmd/readmem.c:67
+#, c-format
+msgid ""
+"Usage: %s ADDR LEN FILENAME\n"
+"Copy device memory content starting with ADDR to FILENAME file.\n"
+"\n"
+"ADDR       start address of the copied memory area\n"
+"LEN        copied memory length\n"
+"FILENAME   name of the output file\n"
+"\n"
+"ADDR and LEN could be in decimal or hexadecimal (prefixed with 0x) form.\n"
+msgstr ""
+
+#: src/cmd/readmem.c:80
+msgid "read content of the memory and write it to file"
+msgstr ""
+
+#: src/cmd/register.c:65
+#, c-format
+msgid "Data register '%s' already defined\n"
+msgstr ""
+
+#: src/cmd/register.c:103
+#, c-format
+msgid ""
+"Usage: %s NAME LENGTH\n"
+"Define new data register with specified NAME and LENGTH.\n"
+"\n"
+"NAME          Data register name\n"
+"LENGTH        Data register length\n"
+msgstr ""
+
+#: src/cmd/register.c:113
+msgid "define new data register for a part"
+msgstr ""
+
+#: src/cmd/script.c:52
+#, c-format
+msgid ""
+"Usage: %s FILENAME\n"
+"Run command sequence from external FILENAME.\n"
+"\n"
+"FILENAME      Name of the file with commands\n"
+msgstr ""
+
+#: src/cmd/script.c:61
+msgid "run command sequence from external file"
+msgstr ""
+
+#: src/cmd/set.c:89
+#, c-format
+msgid ""
+"Usage: %s SIGNAL DIR [DATA]\n"
+"Set signal state in input BSR (Boundary Scan Register).\n"
+"\n"
+"SIGNAL        signal name (from JTAG declaration file)\n"
+"DIR           requested signal direction; possible values: 'in' or 'out'\n"
+"DATA          desired output signal value ('0' or '1'); used only if DIR\n"
+"                is 'out'\n"
+msgstr ""
+
+#: src/cmd/set.c:101
+msgid "set external signal value"
+msgstr ""
+
+#: src/cmd/shift.c:60
+#, c-format
+msgid ""
+"Usage: %s\n"
+"Usage: %s\n"
+"Shift instruction or data register through JTAG chain.\n"
+msgstr ""
+
+#: src/cmd/shift.c:68
+msgid "shift data/instruction registers through JTAG chain"
+msgstr ""
+
+#: src/cmd/signal.c:60
+#, c-format
+msgid "Signal '%s' already defined\n"
+msgstr ""
+
+#: src/cmd/signal.c:80
+#, c-format
+msgid ""
+"Usage: %s SIGNAL [PINLIST...]\n"
+"Define new signal with name SIGNAL for a part.\n"
+"\n"
+"SIGNAL        New signal name\n"
+"PINLIST       List of pins for a signal (not used)\n"
+msgstr ""
+
+#: src/cmd/signal.c:90
+msgid "define new signal for a part"
+msgstr ""
+
+#: src/detect.c:56
+#, c-format
+msgid "Cannot open %s\n"
+msgstr ""
+
+#: src/detect.c:189
+#, c-format
+msgid "IR length: %d\n"
+msgstr ""
+
+#: src/detect.c:205
+msgid "Unable to detect JTAG chain length\n"
+msgstr ""
+
+#: src/detect.c:208
+#, c-format
+msgid "Chain length: %d\n"
+msgstr ""
+
+#: src/detect.c:249
+#, c-format
+msgid "Device Id: %s\n"
+msgstr ""
+
+#: src/detect.c:270
+msgid "  Unknown manufacturer!\n"
+msgstr ""
+
+#: src/detect.c:276
+#, c-format
+msgid "  Manufacturer: %s\n"
+msgstr ""
+
+#: src/detect.c:278
+msgid "Warning: Manufacturer too long\n"
+msgstr ""
+
+#: src/detect.c:294
+msgid "  Unknown part!\n"
+msgstr ""
+
+#: src/detect.c:300
+#, c-format
+msgid "  Part:         %s\n"
+msgstr ""
+
+#: src/detect.c:302
+msgid "Warning: Part too long\n"
+msgstr ""
+
+#: src/detect.c:318
+msgid "  Unknown stepping!\n"
+msgstr ""
+
+#: src/detect.c:324
+#, c-format
+msgid "  Stepping:     %s\n"
+msgstr ""
+
+#: src/detect.c:326
+msgid "Warning: Stepping too long\n"
+msgstr ""
+
+#: src/detect.c:338
+#, c-format
+msgid "  Filename:     %s\n"
+msgstr ""
+
+#: src/detect.c:353
+msgid "Error: Unable to detect JTAG chain end!\n"
+msgstr ""
+
+#: src/discovery.c:113
+msgid "Detecting IR length ... "
+msgstr ""
+
+#: src/discovery.c:119 src/discovery.c:151
+#, c-format
+msgid "%d\n"
+msgstr ""
+
+#: src/discovery.c:122
+msgid "Error: Invalid IR length!\n"
+msgstr ""
+
+#: src/discovery.c:133
+msgid "Error: Out of memory!\n"
+msgstr ""
+
+#: src/discovery.c:145
+#, c-format
+msgid "Detecting DR length for IR %s ... "
+msgstr ""
+
+#: src/flash.c:82
+#, c-format
+msgid "unknown flash - vendor id: %d (0x%04x)\n"
+msgstr ""
+
+#: src/flash.c:95
+msgid "Note: Supported configuration is 2 x 16 bit or 1 x 16 bit only\n"
+msgstr ""
+
+#: src/flash.c:106
+msgid "Flash not supported!\n"
+msgstr ""
+
+#: src/flash.c:121 src/flash.c:269 src/flash.c:378
+msgid "no flash driver found\n"
+msgstr ""
+
+#: src/flash.c:132
+msgid "Invalid sync sequence!\n"
+msgstr ""
+
+#: src/flash.c:150 src/flash.c:390
+#, c-format
+msgid "block %d unlocked\n"
+msgstr ""
+
+#: src/flash.c:151 src/flash.c:297 src/flash.c:391
+#, c-format
+msgid "erasing block %d: %d\n"
+msgstr ""
+
+#: src/flash.c:155 src/flash.c:285 src/flash.c:383
+msgid "program:\n"
+msgstr ""
+
+#: src/flash.c:163 src/flash.c:203
+msgid "Error: premature end of file\n"
+msgstr ""
+
+#: src/flash.c:166 src/flash.c:206
+#, c-format
+msgid "record: start = 0x%08X, len = 0x%08X, checksum = 0x%08X\n"
+msgstr ""
+
+#: src/flash.c:170 src/flash.c:210
+msgid "Error: Invalid record length!\n"
+msgstr ""
+
+#: src/flash.c:177 src/flash.c:217 src/flash.c:304 src/flash.c:350
+#: src/readmem.c:102
+#, c-format
+msgid "addr: 0x%08X"
+msgstr ""
+
+#: src/flash.c:182 src/flash.c:316
+msgid ""
+"\n"
+"flash error\n"
+msgstr ""
+
+#: src/flash.c:194 src/flash.c:327
+msgid "verify:\n"
+msgstr ""
+
+#: src/flash.c:223
+#, c-format
+msgid ""
+"\n"
+"verify error: 0x%08X vs. 0x%08X at addr %08X\n"
+msgstr ""
+
+#: src/flash.c:232 src/flash.c:360 src/flash.c:396 src/readmem.c:109
+msgid ""
+"\n"
+"Done.\n"
+msgstr ""
+
+#: src/flash.c:279
+msgid "Out of memory!\n"
+msgstr ""
+
+#: src/flash.c:296
+#, c-format
+msgid ""
+"\n"
+"block %d unlocked\n"
+msgstr ""
+
+#: src/flash.c:339
+msgid "Error during file read.\n"
+msgstr ""
+
+#: src/flash.c:355
+#, c-format
+msgid ""
+"\n"
+"verify error:\n"
+"readed: 0x%08X\n"
+"expected: 0x%08X\n"
+msgstr ""
+
+#: src/flash.c:374 src/flash.c:387
+#, c-format
+msgid "addr: 0x%08X\n"
+msgstr ""
+
+#: src/jtag.c:261
+#, c-format
+msgid ""
+"%s\n"
+"Copyright (C) 2002, 2003 ETC s.r.o.\n"
+"%s is free software, covered by the GNU General Public License, and you are\n"
+"welcome to change it and/or distribute copies of it under certain conditions.\n"
+"There is absolutely no warranty for %s.\n"
+"\n"
+msgstr ""
+
+#: src/jtag.c:274
+#, c-format
+msgid ""
+"Warning: %s may damage your hardware! Type \"quit\" to exit!\n"
+"\n"
+msgstr ""
+
+#: src/jtag.c:275
+msgid ""
+"Type \"help\" for help.\n"
+"\n"
+msgstr ""
+
+#: src/part/data_register.c:46
+msgid "Warning: Data register name too long\n"
+msgstr ""
+
+#: src/part/instruction.c:46
+msgid "Warning: Instruction name too long\n"
+msgstr ""
+
+#: src/part/part.c:168 src/part/part.c:205
+#, c-format
+msgid "%s(%s:%d) Boundary Scan Register (BSR) not found\n"
+msgstr ""
+
+#: src/part/part.c:176
+#, c-format
+msgid "signal '%s' cannot be set as output\n"
+msgstr ""
+
+#: src/part/part.c:186
+#, c-format
+msgid "signal '%s' cannot be set as input\n"
+msgstr ""
+
+#: src/part/part.c:210
+#, c-format
+msgid "signal '%s' is not input signal\n"
+msgstr ""
+
+#: src/part/part.c:227
+#, c-format
+msgid "%%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n"
+msgstr ""
+
+#: src/part/part.c:236 src/part/part.c:238
+msgid "(none)"
+msgstr ""
+
+#: src/readmem.c:61
+msgid "Error: Bus width detection failed\n"
+msgstr ""
+
+#: src/readmem.c:67
+msgid "Unknown bus width!\n"
+msgstr ""
+
+#: src/readmem.c:74
+#, c-format
+msgid "address: 0x%08X\n"
+msgstr ""
+
+#: src/readmem.c:75
+#, c-format
+msgid "length:  0x%08X\n"
+msgstr ""
+
+#: src/readmem.c:78
+msgid "length is 0.\n"
+msgstr ""
+
+#: src/readmem.c:82
+msgid "reading:\n"
+msgstr ""
+
+#: src/tap/cable/arcom.c:100
+msgid "Arcom JTAG Cable"
+msgstr ""
+
+#: src/tap/cable/byteblaster.c:126
+msgid "Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port Download Cable"
+msgstr ""
+
+#: src/tap/cable/dlc5.c:97
+msgid "Xilinx DLC5 JTAG Parallel Cable III"
+msgstr ""
+
+#: src/tap/cable/ea253.c:100
+msgid "ETC EA253 JTAG Cable"
+msgstr ""
+
+#: src/tap/cable/ei012.c:102
+msgid "ETC EI012 JTAG Cable"
+msgstr ""
+
+#: src/tap/cable/keithkoep.c:109
+msgid "Keith & Koep JTAG cable"
+msgstr ""
+
+#: src/tap/cable/mpcbdm.c:106
+msgid "Mpcbdm JTAG cable"
+msgstr ""
+
+#: src/tap/cable/triton.c:111
+msgid "Ka-Ro TRITON Starterkit II (PXA255/250) JTAG Cable"
+msgstr ""
+
+#: src/tap/cable/wiggler.c:104
+msgid "Macraigor Wiggler JTAG Cable"
+msgstr ""
+
+#: src/tap/chain.c:110 src/tap/chain.c:133
+#, c-format
+msgid "%s(%d) Part %d without active instruction\n"
+msgstr ""
+
+#: src/tap/chain.c:137
+#, c-format
+msgid "%s(%d) Part %d without data register\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:161 src/tap/parport/ppdev.c:118
+msgid "Syntax error!\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:166
+msgid "Invalid port address!\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:176
+#, c-format
+msgid "Disconnecting %s from parallel port at 0x%x\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:183 src/tap/parport/ppdev.c:130
+msgid "Changed cable to 'none'\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:192 src/tap/parport/ppdev.c:139
+#, c-format
+msgid "Unknown cable: %s\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:196
+#, c-format
+msgid "Initializing %s on parallel port at 0x%x\n"
+msgstr ""
+
+#: src/tap/parport/direct.c:200 src/tap/parport/ppdev.c:147
+#, c-format
+msgid "%s(%d) Out of memory.\n"
+msgstr ""
+
+#: src/tap/parport/ppdev.c:124
+#, c-format
+msgid "Disconnecting %s from ppdev port %s\n"
+msgstr ""
+
+#: src/tap/parport/ppdev.c:143
+#, c-format
+msgid "Initializing %s on ppdev port %s\n"
+msgstr ""
+
+#: src/tap/tap.c:54 src/tap/tap.c:75 src/tap/tap.c:86
+#, c-format
+msgid "%s: Invalid state: %2X\n"
+msgstr ""