diff --git a/jtag/ChangeLog b/jtag/ChangeLog index d983af4a..cded42bf 100644 --- a/jtag/ChangeLog +++ b/jtag/ChangeLog @@ -1,5 +1,7 @@ 2008-09-14 Kolja Waschk + * configure.ac, NEWS, po/fr.po, po/rw.po, po/sk.po: Preparation + for release of UrJTAG 0.9 tarball * include/Makefile.am, src/bsdl/Makefile.am: list new header files here so they get included in distribution diff --git a/jtag/NEWS b/jtag/NEWS index a99ee77e..4366c537 100644 --- a/jtag/NEWS +++ b/jtag/NEWS @@ -1,5 +1,62 @@ $Id$ +urjtag-0.9 + + * Completely rewritten BSDL parser, making it better maintainable, + extendable, and also adding support for IEEE 1532 extensions + (Arnim Laeuger) + * Major internal improvements + - Most if not all internal functions now take a pointer to the + chain configuration data as an argument, instead of using a + global "chain" variable. Needed for use as a library (Jie Zhang) + - Generally UrJTAG uses less global variables now (all) + - Added new "link driver" layer where previously only parport + was known; now there's a separate subsystem for USB cables, + named "usbconn". Due to the switch, some "cable" command + arguments for USB cables changed! (Arnim Laeuger, Kolja Waschk) + * Improvements to the build system + - Cable and link driver selection during ./configure (Arnim Laeuger) + - Fix building out of tree (Mike Frysinger) + - Support run-time relocatable UrJTAG (Mike Frysinger) + - Many improvements for building on Windows and generally on + other platforms (by Mike Frysinger) + - Support building under Mac OS X (Ville Voipio) + - Some initial work to support building in MinGW (Kolja Waschk) + * Updates to the jtag command shell + - Allow to disable startup message and quit upon EOF (Mike Frysinger) + - Allow customization of jtag prompt via env variable (Mike Frysinger) + - Don't add duplicate history lines (Uwe Bonnes) + - Fixes to handling of the "frequency" command (many contributors) + - Fix quitting when not using readline (Mike Frysinger) + - Fix some irritating warning messages even if there was nothing wrong + - New "idcode" command (Uwe Bonnes) + * Updates to the SVF player + - Added progress indicator (Steve Franks) + - Fix for RUNTEST command with SEC argument (Arnim Laeuger) + - Read TDO data from instruction shift (Arnim Laeuger) + * New and updated bus drivers + - General cleanup and malloc/free issues fixed (Hartley Sweeten) + - Added avr32 bus driver (Gabor Juhos) + - Added bf526,bf527,bf538 and bf548_ezkit bus driver (Jie Zhang) + - Added fjmem bus driver (A. Laeuger) + - Add 32 bit bus support for mpc824x (Eugene Boldenkov) + * New and updated cable drivers + - General cleanup and malloc/free issues fixed (Hartley Sweeten) + - Generic FT2232 driver improvements for performance and + stability (Arnim Laeuger) + - New FT2232 based cable BFIN-UJTAG/gnICE (Michael Hennerich) + - New Segger J-Link driver (not really functional yet) (Kolja Waschk) + - Xilinx XPCU cable driver now using fast GPIF transfers via vendor + request instead of bit banging (Kolja Waschk) + * Updated flash drivers + - Fix address shift (Jeff Wittrock) + - Fixes and better verbosity in flash drivers (Jie Zhang) + * Added new JTAG declarations for + - Analog Devices Blackfin BF527 (Jie Zhang) + - Atmel ATF1504ASV (Stefan Pledl) + - Atmel AT32AP7000 (Gabor Juhos) + * Updated documentation + urjtag-0.8 * Integrated BSDL parser (Arnim Laeuger) diff --git a/jtag/configure.ac b/jtag/configure.ac index d8ee3e39..d62ef186 100644 --- a/jtag/configure.ac +++ b/jtag/configure.ac @@ -23,7 +23,7 @@ # and other UrJTAG authors, 2007, 2008, ... # -AC_INIT(UrJTAG,0.8,http://urjtag.org,urjtag) +AC_INIT(UrJTAG,0.9,http://urjtag.org,urjtag) AC_PREREQ(2.54) AC_COPYRIGHT([Copyright (C) 2007/08 Kolja Waschk and other UrJTAG authors; 2002/03 ETC s.r.o.]) diff --git a/jtag/po/fr.po b/jtag/po/fr.po index 2cf68ed3..57d33200 100644 --- a/jtag/po/fr.po +++ b/jtag/po/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: GNU jtag 0.5.1\n" "Report-Msgid-Bugs-To: marcel@telka.sk\n" -"POT-Creation-Date: 2008-09-03 11:19-0400\n" +"POT-Creation-Date: 2008-09-13 22:55+0200\n" "PO-Revision-Date: 2004-05-10 08:00-0500\n" "Last-Translator: Michel Robitaille \n" "Language-Team: French \n" @@ -252,8 +252,8 @@ msgstr "" #: src/bus/buses.c:163 src/cmd/include.c:73 src/cmd/parse.c:59 #: src/cmd/parse.c:93 src/cmd/scan.c:88 src/cmd/shell.c:62 src/jtag.c:407 #: src/jtag.c:426 src/jtag.c:450 src/tap/detect.c:270 -#: src/tap/usbconn/libusb.c:150 src/tap/usbconn/libftd2xx.c:278 -#: src/tap/usbconn/libftdi.c:247 +#: src/tap/usbconn/libusb.c:150 src/tap/usbconn/libftd2xx.c:283 +#: src/tap/usbconn/libftdi.c:252 #, c-format msgid "Out of memory\n" msgstr "Mémoire épuisée\n" @@ -919,7 +919,7 @@ msgstr "Cable inconnue: %s\n" #: src/cmd/cable.c:98 src/tap/cable/ft2232.c:1288 #: src/tap/cable/generic_parport.c:82 src/tap/cable/generic_usbconn.c:211 -#: src/tap/cable/jim.c:68 src/tap/cable/usbblaster.c:77 +#: src/tap/cable/jim.c:68 src/tap/cable/usbblaster.c:79 #: src/tap/cable/vision_ep9307.c:199 src/tap/cable/wiggler.c:193 #, c-format msgid "%s(%d) malloc failed!\n" @@ -1315,12 +1315,12 @@ msgstr "afficher l'aide-m msgid "Please use the 'include' command instead of 'script'\n" msgstr "" -#: src/cmd/include.c:98 +#: src/cmd/include.c:100 #, fuzzy, c-format msgid "Unable to open file `%s go=%d'!\n" msgstr "Incapable d'ouvrir le fichier `%s'!\n" -#: src/cmd/include.c:112 +#: src/cmd/include.c:114 #, fuzzy, c-format msgid "" "Usage: %s FILENAME [n] \n" @@ -1333,11 +1333,11 @@ msgstr "" "\n" "FICHIER nom du fichier contenant les commande\n" -#: src/cmd/include.c:133 +#: src/cmd/include.c:135 msgid "include command sequence from external repository" msgstr "inclure une séquence de commandes à partir du dépôt externe" -#: src/cmd/include.c:152 +#: src/cmd/include.c:154 msgid "run command sequence from external file" msgstr "exécuter une séquence de commandes à partir d'un FICHIER externe" @@ -1892,7 +1892,7 @@ msgstr "" msgid "write content of file to the memory" msgstr "" -#: src/flash/amd.c:276 +#: src/flash/amd.c:281 #, c-format msgid "" "Chip: AMD Flash\n" @@ -1901,8 +1901,8 @@ msgstr "" "Module: AMD Flash\n" "\tManufacturier: " -#: src/flash/amd.c:280 src/flash/amd.c:304 src/flash/amd.c:319 -#: src/flash/amd.c:337 src/flash/amd_flash.c:234 +#: src/flash/amd.c:285 src/flash/amd.c:309 src/flash/amd.c:324 +#: src/flash/amd.c:342 src/flash/amd_flash.c:234 #, c-format msgid "" "\n" @@ -1911,18 +1911,18 @@ msgstr "" "\n" "\tModule: " -#: src/flash/amd.c:298 src/flash/amd.c:313 src/flash/amd.c:331 -#: src/flash/amd.c:343 src/flash/amd_flash.c:245 +#: src/flash/amd.c:303 src/flash/amd.c:318 src/flash/amd.c:336 +#: src/flash/amd.c:348 src/flash/amd_flash.c:245 #, c-format msgid "Unknown (ID 0x%04x)" msgstr "Inconnu (ID 0x%04x)" -#: src/flash/amd.c:348 +#: src/flash/amd.c:353 #, fuzzy, c-format msgid "Unknown manufacturer (ID 0x%04x) Chip (ID 0x%04x)" msgstr "Manufacturier inconnu (ID 0x%04x)" -#: src/flash/amd.c:351 src/flash/amd_flash.c:248 +#: src/flash/amd.c:356 src/flash/amd_flash.c:248 #, c-format msgid "" "\n" @@ -1931,20 +1931,20 @@ msgstr "" "\n" "\tProtégé: %04x\n" -#: src/flash/amd.c:423 src/flash/amd.c:435 src/flash/amd.c:447 +#: src/flash/amd.c:428 src/flash/amd.c:440 src/flash/amd.c:452 #: src/flash/detectflash.c:106 src/flash/detectflash.c:136 msgid "AMD/Fujitsu Standard Command Set" msgstr "AMD/Fujitsu Jeu standard de commandes" -#: src/flash/amd.c:424 +#: src/flash/amd.c:429 msgid "supported: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit" msgstr "supportés: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit" -#: src/flash/amd.c:436 +#: src/flash/amd.c:441 msgid "supported: AMD 29LV800B; 1x16 Bit" msgstr "supportés: AMD 29LV800B; 1x16 Bit" -#: src/flash/amd.c:448 +#: src/flash/amd.c:453 #, fuzzy msgid "supported: AMD 29LV160, AMD 29LV065D, AMD 29LV040B; 1x8 Bit" msgstr "supportés: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit" @@ -2831,7 +2831,7 @@ msgstr "%%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n" msgid "(none)" msgstr "(aucun)" -#: src/svf/svf.c:347 src/svf/svf.c:518 src/svf/svf.c:852 src/svf/svf.c:856 +#: src/svf/svf.c:347 src/svf/svf.c:518 src/svf/svf.c:857 src/svf/svf.c:861 #, fuzzy, c-format msgid "out of memory" msgstr "mémoire épuisée\n" @@ -2841,7 +2841,7 @@ msgstr "m msgid "Error %s: mismatch at position %d for TDO\n" msgstr "" -#: src/svf/svf.c:590 src/svf/svf.c:991 +#: src/svf/svf.c:590 src/svf/svf.c:996 #, c-format msgid "Warning %s: command %s not implemented\n" msgstr "" @@ -2866,52 +2866,62 @@ msgstr "" msgid " This message is only displayed once.\n" msgstr "" -#: src/svf/svf.c:804 +#: src/svf/svf.c:658 +#, c-format +msgid "Error %s: Maximum cable clock frequency required for RUNTEST.\n" +msgstr "" + +#: src/svf/svf.c:659 +#, c-format +msgid " Set the cable frequency with 'FREQUENCY '.\n" +msgstr "" + +#: src/svf/svf.c:809 #, c-format msgid "Error %s: first %s command after length change must have a TDI value.\n" msgstr "" -#: src/svf/svf.c:829 +#: src/svf/svf.c:834 #, c-format msgid "Error %s: SIR command length inconsistent.\n" msgstr "" -#: src/svf/svf.c:926 +#: src/svf/svf.c:931 #, c-format msgid "Error %s: no further TRST command allowed after mode ABSENT\n" msgstr "" -#: src/svf/svf.c:946 +#: src/svf/svf.c:951 #, c-format msgid "Error %s: TRST ABSENT must not be issued after a STATE command\n" msgstr "" -#: src/svf/svf.c:952 +#: src/svf/svf.c:957 #, c-format msgid "Error %s: TRST ABSENT must not be issued after an SIR or SDR command\n" msgstr "" -#: src/svf/svf.c:962 +#: src/svf/svf.c:967 #, c-format msgid "Warning %s: unimplemented mode '%s' for TRST\n" msgstr "" -#: src/svf/svf.c:1046 +#: src/svf/svf.c:1052 #, fuzzy, c-format msgid "Error %s: no JTAG chain available\n" msgstr "ERREUR: incapable de détecter la fin de la chaîne JTAG!\n" -#: src/svf/svf.c:1050 +#: src/svf/svf.c:1056 #, c-format msgid "Error %s: chain without any parts\n" msgstr "" -#: src/svf/svf.c:1066 +#: src/svf/svf.c:1072 #, c-format msgid "Error %s: could not establish SDR register\n" msgstr "" -#: src/svf/svf.c:1098 +#: src/svf/svf.c:1104 #, c-format msgid "Error %s: could not establish SIR instruction\n" msgstr "" @@ -3047,7 +3057,7 @@ msgid "" " or: cable %s ppi PPIDEV\n" "\n" "PORTADDR parallel port address (e.g. 0x378)\n" -"PPDEF ppdev device (e.g. /dev/parport0)\n" +"PPDEV ppdev device (e.g. /dev/parport0)\n" "PPIDEF ppi device (e.g. /dev/ppi0)\n" "\n" msgstr "" @@ -3108,7 +3118,12 @@ msgstr "Cable JTAG Mpcbdm" msgid "Ka-Ro TRITON Starterkit II (PXA255/250) JTAG Cable" msgstr "Cable JTAG Ka-Ro TRITON Starterkit II (PXA255/250)" -#: src/tap/cable/usbblaster.c:434 +#: src/tap/cable/usbblaster.c:102 +#, c-format +msgid "Warning: USB-Blaster frequency is fixed to %ld Hz\n" +msgstr "" + +#: src/tap/cable/usbblaster.c:442 #, c-format msgid "" "Usage: cable %s [vid=VID] [pid=PID] [desc=DESC] [driver=DRIVER]\n" @@ -3121,7 +3136,7 @@ msgid "" "\n" msgstr "" -#: src/tap/cable/usbblaster.c:450 +#: src/tap/cable/usbblaster.c:458 msgid "Altera USB-Blaster Cable" msgstr "" @@ -3188,7 +3203,7 @@ msgid "" " or: cable %s ppi PPIDEV [TDO,TRST,TDI,TCK,TMS,SRESET]\n" "\n" "PORTADDR parallel port address (e.g. 0x378)\n" -"PPDEF ppdev device (e.g. /dev/parport0)\n" +"PPDEV ppdev device (e.g. /dev/parport0)\n" "PPIDEF ppi device (e.g. /dev/ppi0)\n" "TDO, ... parallel port bit number, prepend '#' for inversion\n" " default is '%s'\n" @@ -3414,116 +3429,194 @@ msgstr "Initialisation de %s sur le port ppdev %s\n" msgid "%s: Invalid state: %2X\n" msgstr "%s: état invalide: %2X\n" -#: src/tap/usbconn/libftd2xx.c:97 -msgid "usbconn_ftd2xx_flush(): FT_Write() failed.\n" +#: src/tap/usbconn/libftd2xx.c:100 +#, c-format +msgid "%s(): FT_Write() failed.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:101 -msgid "usbconn_ftd2xx_flush(): Written fewer bytes than requested.\n" +#: src/tap/usbconn/libftd2xx.c:104 src/tap/usbconn/libftdi.c:89 +#, c-format +msgid "%s(): Written fewer bytes than requested.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:120 -msgid "usbconn_ftd2xx_flush(): Receive buffer does not exist.\n" +#: src/tap/usbconn/libftd2xx.c:123 src/tap/usbconn/libftdi.c:108 +#, c-format +msgid "%s(): Receive buffer does not exist.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:127 +#: src/tap/usbconn/libftd2xx.c:130 src/tap/usbconn/libftd2xx.c:190 #, c-format -msgid "usbconn_ftd2xx_flush(): Error from FT_Read(): %d\n" +msgid "%s(): Error from FT_Read(): %d\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:130 +#: src/tap/usbconn/libftd2xx.c:134 src/tap/usbconn/libftdi.c:119 #, c-format -msgid "usbconn_ftd2xx_flush(): Received less bytes than requested.\n" +msgid "%s(): Received less bytes than requested.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:186 +#: src/tap/usbconn/libftd2xx.c:256 src/tap/usbconn/libftdi.c:224 #, c-format -msgid "usbconn_ftd2xx_read(): Error from FT_Read(): %d\n" +msgid "%s(): Send buffer does not exist.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:251 -msgid "usbconn_ftd2xx_write(): Send buffer does not exist.\n" +#: src/tap/usbconn/libftd2xx.c:314 +#, c-format +msgid "Connected to libftd2xx driver.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:299 +#: src/tap/usbconn/libftd2xx.c:389 src/tap/usbconn/libftd2xx.c:431 +#: src/tap/usbconn/libftd2xx.c:450 src/tap/usbconn/libftd2xx.c:473 #, c-format -msgid "Connected to libftd2xx driver.\n" +msgid "%s(): Can't reset device.\n" +msgstr "" + +#: src/tap/usbconn/libftd2xx.c:391 src/tap/usbconn/libftd2xx.c:433 +#: src/tap/usbconn/libftd2xx.c:452 src/tap/usbconn/libftd2xx.c:475 +#, c-format +msgid "%s(): Can't purge RX buffer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:357 src/tap/usbconn/libftd2xx.c:399 -#: src/tap/usbconn/libftd2xx.c:418 src/tap/usbconn/libftd2xx.c:441 -msgid "Can't reset device.\n" +#: src/tap/usbconn/libftd2xx.c:394 src/tap/usbconn/libftd2xx.c:445 +#, c-format +msgid "%s(): Can't disable bitmode.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:359 src/tap/usbconn/libftd2xx.c:401 -#: src/tap/usbconn/libftd2xx.c:420 src/tap/usbconn/libftd2xx.c:443 -msgid "Can't purge RX buffer.\n" +#: src/tap/usbconn/libftd2xx.c:397 +#, c-format +msgid "%s(): Can't set latency timer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:362 src/tap/usbconn/libftd2xx.c:413 -msgid "Can't disable bitmode.\n" +#: src/tap/usbconn/libftd2xx.c:400 +#, c-format +msgid "%s(): Can't set baudrate.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:365 -msgid "Can't set latency timer.\n" +#: src/tap/usbconn/libftd2xx.c:436 +#, c-format +msgid "%s(): Can't set special characters.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:368 -msgid "Can't set baudrate.\n" +#: src/tap/usbconn/libftd2xx.c:442 +#, c-format +msgid "%s(): Can't set target latency timer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:404 -msgid "Can't set special characters.\n" +#: src/tap/usbconn/libftd2xx.c:447 +#, c-format +msgid "%s(): Can't set MPSSE bitmode.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:410 -msgid "Can't set target latency timer.\n" +#: src/tap/usbconn/libftdi.c:84 +#, c-format +msgid "%s(): ftdi_write_data() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:415 -msgid "Can't set MPSSE bitmode.\n" +#: src/tap/usbconn/libftdi.c:115 src/tap/usbconn/libftdi.c:168 +#, c-format +msgid "%s(): Error from ftdi_read_data(): %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:85 -msgid "usbconn_ftdi_flush(): Written fewer bytes than requested.\n" +#: src/tap/usbconn/libftdi.c:286 +#, c-format +msgid "Connected to libftdi driver.\n" msgstr "" -#: src/tap/usbconn/libftdi.c:104 -msgid "usbconn_ftdi_flush(): Receive buffer does not exist.\n" +#: src/tap/usbconn/libftdi.c:323 +#, c-format +msgid "%s() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:111 +#: src/tap/usbconn/libftdi.c:348 #, c-format -msgid "usbconn_ftdi_flush(): Error from ftdi_read_data(): %s\n" +msgid "%s(): ftdi_usb_purge_buffers() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:115 +#: src/tap/usbconn/libftdi.c:351 src/tap/usbconn/libftdi.c:368 #, c-format -msgid "usbconn_ftdi_flush(): Received less bytes than requested.\n" +msgid "%s(): ftdi_read_data() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:163 +#: src/tap/usbconn/libftdi.c:360 #, c-format -msgid "usbconn_ftdi_read(): Error from ftdi_read_data(): %s\n" +msgid "%s(): ftdi_usb_purge_rx_buffer() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:219 -msgid "usbconn_ftdi_write(): Send buffer does not exist.\n" +#: src/tap/usbconn/libftdi.c:365 +#, c-format +msgid "%s(): ftdi_usb_purge_tx_buffer() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:271 +#: src/tap/usbconn/libftdi.c:385 #, c-format -msgid "Connected to libftdi driver.\n" +msgid "%s(): ftdi_poll_status() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:390 src/tap/usbconn/libftdi.c:487 +#: src/tap/usbconn/libftdi.c:506 +#, c-format +msgid "%s(): ftdi_usb_reset() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:413 src/tap/usbconn/libftdi.c:479 +#, c-format +msgid "%s(): ftdi_disable_bitbang() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:417 src/tap/usbconn/libftdi.c:475 +#, c-format +msgid "%s(): ftdi_set_latency_timer() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:430 +#, c-format +msgid "%s(): ftdi_set_baudrate() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:483 +#, c-format +msgid "%s(): ftdi_set_bitmode() failed: %s\n" msgstr "" #, fuzzy #~ msgid "Syntax Error" #~ msgstr "ERREUR de syntaxe!\n" +#, fuzzy +#~ msgid "Error in Standard Declarations" +#~ msgstr "ERREUR: longueur de l'enregistrement invalide!\n" + +#, fuzzy +#~ msgid "Error in Attribute type identification" +#~ msgstr "ERREUR: longueur de l'enregistrement invalide!\n" + +#, fuzzy +#~ msgid "Error in Type definition" +#~ msgstr "ERREUR: longueur de l'enregistrement invalide!\n" + +#, fuzzy +#~ msgid "Error in Bit definition" +#~ msgstr "ERREUR: longueur de l'enregistrement invalide!\n" + +#, fuzzy +#~ msgid "Error in Package Body definition" +#~ msgstr "ERREUR: longueur de l'enregistrement invalide!\n" + +#, fuzzy +#~ msgid "Error in Cell Constant definition" +#~ msgstr "ERREUR: longueur de l'enregistrement invalide!\n" + +#, fuzzy +#~ msgid "Error in Cell Data Record" +#~ msgstr "Error: échec de la connexion par cable!\n" + #, fuzzy #~ msgid "Error in Cell_Type Function field" #~ msgstr "Error: échec de la connexion par cable!\n" +#, fuzzy +#~ msgid "Error in BScan_Inst Instruction field" +#~ msgstr "Error: échec de la connexion par cable!\n" + #, fuzzy #~ msgid "Cannot open file %s or %s.\n" #~ msgstr "ne peut ouvrir %s\n" diff --git a/jtag/po/rw.po b/jtag/po/rw.po index 2cedbdf5..647d4d2f 100644 --- a/jtag/po/rw.po +++ b/jtag/po/rw.po @@ -16,7 +16,7 @@ msgid "" msgstr "" "Project-Id-Version: jtag 0.5.1\n" "Report-Msgid-Bugs-To: marcel@telka.sk\n" -"POT-Creation-Date: 2008-09-03 11:19-0400\n" +"POT-Creation-Date: 2008-09-13 22:55+0200\n" "PO-Revision-Date: 2005-04-04 10:55-0700\n" "Last-Translator: Steven Michael Murphy \n" "Language-Team: Kinyarwanda \n" @@ -251,8 +251,8 @@ msgstr "" #: src/bus/buses.c:163 src/cmd/include.c:73 src/cmd/parse.c:59 #: src/cmd/parse.c:93 src/cmd/scan.c:88 src/cmd/shell.c:62 src/jtag.c:407 #: src/jtag.c:426 src/jtag.c:450 src/tap/detect.c:270 -#: src/tap/usbconn/libusb.c:150 src/tap/usbconn/libftd2xx.c:278 -#: src/tap/usbconn/libftdi.c:247 +#: src/tap/usbconn/libusb.c:150 src/tap/usbconn/libftd2xx.c:283 +#: src/tap/usbconn/libftdi.c:252 #, fuzzy, c-format msgid "Out of memory\n" msgstr "Bya" @@ -904,7 +904,7 @@ msgstr "Ukwihuza Ubwoko" #: src/cmd/cable.c:98 src/tap/cable/ft2232.c:1288 #: src/tap/cable/generic_parport.c:82 src/tap/cable/generic_usbconn.c:211 -#: src/tap/cable/jim.c:68 src/tap/cable/usbblaster.c:77 +#: src/tap/cable/jim.c:68 src/tap/cable/usbblaster.c:79 #: src/tap/cable/vision_ep9307.c:199 src/tap/cable/wiggler.c:193 #, c-format msgid "%s(%d) malloc failed!\n" @@ -1257,12 +1257,12 @@ msgstr "Kugaragaza iyi Ifashayobora" msgid "Please use the 'include' command instead of 'script'\n" msgstr "" -#: src/cmd/include.c:98 +#: src/cmd/include.c:100 #, fuzzy, c-format msgid "Unable to open file `%s go=%d'!\n" msgstr "Kuri Gufungura IDOSIYE" -#: src/cmd/include.c:112 +#: src/cmd/include.c:114 #, fuzzy, c-format msgid "" "Usage: %s FILENAME [n] \n" @@ -1271,12 +1271,12 @@ msgid "" "FILENAME Name of the file with commands\n" msgstr "Komandi: Bivuye external Bya i IDOSIYE Na:" -#: src/cmd/include.c:133 +#: src/cmd/include.c:135 #, fuzzy msgid "include command sequence from external repository" msgstr "Gushyiramo Komandi: Bivuye external" -#: src/cmd/include.c:152 +#: src/cmd/include.c:154 #, fuzzy msgid "run command sequence from external file" msgstr "Gukoresha Komandi: Bivuye external IDOSIYE" @@ -1769,54 +1769,54 @@ msgstr "" msgid "write content of file to the memory" msgstr "" -#: src/flash/amd.c:276 +#: src/flash/amd.c:281 #, c-format msgid "" "Chip: AMD Flash\n" "\tManufacturer: " msgstr "" -#: src/flash/amd.c:280 src/flash/amd.c:304 src/flash/amd.c:319 -#: src/flash/amd.c:337 src/flash/amd_flash.c:234 +#: src/flash/amd.c:285 src/flash/amd.c:309 src/flash/amd.c:324 +#: src/flash/amd.c:342 src/flash/amd_flash.c:234 #, c-format msgid "" "\n" "\tChip: " msgstr "" -#: src/flash/amd.c:298 src/flash/amd.c:313 src/flash/amd.c:331 -#: src/flash/amd.c:343 src/flash/amd_flash.c:245 +#: src/flash/amd.c:303 src/flash/amd.c:318 src/flash/amd.c:336 +#: src/flash/amd.c:348 src/flash/amd_flash.c:245 #, c-format msgid "Unknown (ID 0x%04x)" msgstr "" -#: src/flash/amd.c:348 +#: src/flash/amd.c:353 #, fuzzy, c-format msgid "Unknown manufacturer (ID 0x%04x) Chip (ID 0x%04x)" msgstr "Ukora mu nganda" # sc/source\ui\src\attrdlg.src:RID_SCPAGE_PROTECTION.BTN_PROTECTED.text -#: src/flash/amd.c:351 src/flash/amd_flash.c:248 +#: src/flash/amd.c:356 src/flash/amd_flash.c:248 #, fuzzy, c-format msgid "" "\n" "\tProtected: %04x\n" msgstr "Birinzwe" -#: src/flash/amd.c:423 src/flash/amd.c:435 src/flash/amd.c:447 +#: src/flash/amd.c:428 src/flash/amd.c:440 src/flash/amd.c:452 #: src/flash/detectflash.c:106 src/flash/detectflash.c:136 msgid "AMD/Fujitsu Standard Command Set" msgstr "" -#: src/flash/amd.c:424 +#: src/flash/amd.c:429 msgid "supported: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit" msgstr "" -#: src/flash/amd.c:436 +#: src/flash/amd.c:441 msgid "supported: AMD 29LV800B; 1x16 Bit" msgstr "" -#: src/flash/amd.c:448 +#: src/flash/amd.c:453 msgid "supported: AMD 29LV160, AMD 29LV065D, AMD 29LV040B; 1x8 Bit" msgstr "" @@ -2661,7 +2661,7 @@ msgstr "" msgid "(none)" msgstr "(ntacyo)" -#: src/svf/svf.c:347 src/svf/svf.c:518 src/svf/svf.c:852 src/svf/svf.c:856 +#: src/svf/svf.c:347 src/svf/svf.c:518 src/svf/svf.c:857 src/svf/svf.c:861 #, fuzzy, c-format msgid "out of memory" msgstr "Inyuma Bya" @@ -2671,7 +2671,7 @@ msgstr "Inyuma Bya" msgid "Error %s: mismatch at position %d for TDO\n" msgstr "" -#: src/svf/svf.c:590 src/svf/svf.c:991 +#: src/svf/svf.c:590 src/svf/svf.c:996 #, c-format msgid "Warning %s: command %s not implemented\n" msgstr "" @@ -2696,52 +2696,62 @@ msgstr "" msgid " This message is only displayed once.\n" msgstr "" -#: src/svf/svf.c:804 +#: src/svf/svf.c:658 +#, c-format +msgid "Error %s: Maximum cable clock frequency required for RUNTEST.\n" +msgstr "" + +#: src/svf/svf.c:659 +#, c-format +msgid " Set the cable frequency with 'FREQUENCY '.\n" +msgstr "" + +#: src/svf/svf.c:809 #, c-format msgid "Error %s: first %s command after length change must have a TDI value.\n" msgstr "" -#: src/svf/svf.c:829 +#: src/svf/svf.c:834 #, c-format msgid "Error %s: SIR command length inconsistent.\n" msgstr "" -#: src/svf/svf.c:926 +#: src/svf/svf.c:931 #, c-format msgid "Error %s: no further TRST command allowed after mode ABSENT\n" msgstr "" -#: src/svf/svf.c:946 +#: src/svf/svf.c:951 #, c-format msgid "Error %s: TRST ABSENT must not be issued after a STATE command\n" msgstr "" -#: src/svf/svf.c:952 +#: src/svf/svf.c:957 #, c-format msgid "Error %s: TRST ABSENT must not be issued after an SIR or SDR command\n" msgstr "" -#: src/svf/svf.c:962 +#: src/svf/svf.c:967 #, c-format msgid "Warning %s: unimplemented mode '%s' for TRST\n" msgstr "" -#: src/svf/svf.c:1046 +#: src/svf/svf.c:1052 #, fuzzy, c-format msgid "Error %s: no JTAG chain available\n" msgstr "Kuri Impera" -#: src/svf/svf.c:1050 +#: src/svf/svf.c:1056 #, c-format msgid "Error %s: chain without any parts\n" msgstr "" -#: src/svf/svf.c:1066 +#: src/svf/svf.c:1072 #, c-format msgid "Error %s: could not establish SDR register\n" msgstr "" -#: src/svf/svf.c:1098 +#: src/svf/svf.c:1104 #, c-format msgid "Error %s: could not establish SIR instruction\n" msgstr "" @@ -2875,7 +2885,7 @@ msgid "" " or: cable %s ppi PPIDEV\n" "\n" "PORTADDR parallel port address (e.g. 0x378)\n" -"PPDEF ppdev device (e.g. /dev/parport0)\n" +"PPDEV ppdev device (e.g. /dev/parport0)\n" "PPIDEF ppi device (e.g. /dev/ppi0)\n" "\n" msgstr "" @@ -2935,7 +2945,12 @@ msgstr "" msgid "Ka-Ro TRITON Starterkit II (PXA255/250) JTAG Cable" msgstr "" -#: src/tap/cable/usbblaster.c:434 +#: src/tap/cable/usbblaster.c:102 +#, c-format +msgid "Warning: USB-Blaster frequency is fixed to %ld Hz\n" +msgstr "" + +#: src/tap/cable/usbblaster.c:442 #, c-format msgid "" "Usage: cable %s [vid=VID] [pid=PID] [desc=DESC] [driver=DRIVER]\n" @@ -2948,7 +2963,7 @@ msgid "" "\n" msgstr "" -#: src/tap/cable/usbblaster.c:450 +#: src/tap/cable/usbblaster.c:458 msgid "Altera USB-Blaster Cable" msgstr "" @@ -3015,7 +3030,7 @@ msgid "" " or: cable %s ppi PPIDEV [TDO,TRST,TDI,TCK,TMS,SRESET]\n" "\n" "PORTADDR parallel port address (e.g. 0x378)\n" -"PPDEF ppdev device (e.g. /dev/parport0)\n" +"PPDEV ppdev device (e.g. /dev/parport0)\n" "PPIDEF ppi device (e.g. /dev/ppi0)\n" "TDO, ... parallel port bit number, prepend '#' for inversion\n" " default is '%s'\n" @@ -3241,116 +3256,194 @@ msgstr "ku Umuyoboro" msgid "%s: Invalid state: %2X\n" msgstr "%s:Leta" -#: src/tap/usbconn/libftd2xx.c:97 -msgid "usbconn_ftd2xx_flush(): FT_Write() failed.\n" +#: src/tap/usbconn/libftd2xx.c:100 +#, c-format +msgid "%s(): FT_Write() failed.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:101 -msgid "usbconn_ftd2xx_flush(): Written fewer bytes than requested.\n" +#: src/tap/usbconn/libftd2xx.c:104 src/tap/usbconn/libftdi.c:89 +#, c-format +msgid "%s(): Written fewer bytes than requested.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:120 -msgid "usbconn_ftd2xx_flush(): Receive buffer does not exist.\n" +#: src/tap/usbconn/libftd2xx.c:123 src/tap/usbconn/libftdi.c:108 +#, c-format +msgid "%s(): Receive buffer does not exist.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:127 +#: src/tap/usbconn/libftd2xx.c:130 src/tap/usbconn/libftd2xx.c:190 #, c-format -msgid "usbconn_ftd2xx_flush(): Error from FT_Read(): %d\n" +msgid "%s(): Error from FT_Read(): %d\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:130 +#: src/tap/usbconn/libftd2xx.c:134 src/tap/usbconn/libftdi.c:119 #, c-format -msgid "usbconn_ftd2xx_flush(): Received less bytes than requested.\n" +msgid "%s(): Received less bytes than requested.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:186 +#: src/tap/usbconn/libftd2xx.c:256 src/tap/usbconn/libftdi.c:224 #, c-format -msgid "usbconn_ftd2xx_read(): Error from FT_Read(): %d\n" +msgid "%s(): Send buffer does not exist.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:251 -msgid "usbconn_ftd2xx_write(): Send buffer does not exist.\n" +#: src/tap/usbconn/libftd2xx.c:314 +#, c-format +msgid "Connected to libftd2xx driver.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:299 +#: src/tap/usbconn/libftd2xx.c:389 src/tap/usbconn/libftd2xx.c:431 +#: src/tap/usbconn/libftd2xx.c:450 src/tap/usbconn/libftd2xx.c:473 #, c-format -msgid "Connected to libftd2xx driver.\n" +msgid "%s(): Can't reset device.\n" +msgstr "" + +#: src/tap/usbconn/libftd2xx.c:391 src/tap/usbconn/libftd2xx.c:433 +#: src/tap/usbconn/libftd2xx.c:452 src/tap/usbconn/libftd2xx.c:475 +#, c-format +msgid "%s(): Can't purge RX buffer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:357 src/tap/usbconn/libftd2xx.c:399 -#: src/tap/usbconn/libftd2xx.c:418 src/tap/usbconn/libftd2xx.c:441 -msgid "Can't reset device.\n" +#: src/tap/usbconn/libftd2xx.c:394 src/tap/usbconn/libftd2xx.c:445 +#, c-format +msgid "%s(): Can't disable bitmode.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:359 src/tap/usbconn/libftd2xx.c:401 -#: src/tap/usbconn/libftd2xx.c:420 src/tap/usbconn/libftd2xx.c:443 -msgid "Can't purge RX buffer.\n" +#: src/tap/usbconn/libftd2xx.c:397 +#, c-format +msgid "%s(): Can't set latency timer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:362 src/tap/usbconn/libftd2xx.c:413 -msgid "Can't disable bitmode.\n" +#: src/tap/usbconn/libftd2xx.c:400 +#, c-format +msgid "%s(): Can't set baudrate.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:365 -msgid "Can't set latency timer.\n" +#: src/tap/usbconn/libftd2xx.c:436 +#, c-format +msgid "%s(): Can't set special characters.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:368 -msgid "Can't set baudrate.\n" +#: src/tap/usbconn/libftd2xx.c:442 +#, c-format +msgid "%s(): Can't set target latency timer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:404 -msgid "Can't set special characters.\n" +#: src/tap/usbconn/libftd2xx.c:447 +#, c-format +msgid "%s(): Can't set MPSSE bitmode.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:410 -msgid "Can't set target latency timer.\n" +#: src/tap/usbconn/libftdi.c:84 +#, c-format +msgid "%s(): ftdi_write_data() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:415 -msgid "Can't set MPSSE bitmode.\n" +#: src/tap/usbconn/libftdi.c:115 src/tap/usbconn/libftdi.c:168 +#, c-format +msgid "%s(): Error from ftdi_read_data(): %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:85 -msgid "usbconn_ftdi_flush(): Written fewer bytes than requested.\n" +#: src/tap/usbconn/libftdi.c:286 +#, c-format +msgid "Connected to libftdi driver.\n" msgstr "" -#: src/tap/usbconn/libftdi.c:104 -msgid "usbconn_ftdi_flush(): Receive buffer does not exist.\n" +#: src/tap/usbconn/libftdi.c:323 +#, c-format +msgid "%s() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:111 +#: src/tap/usbconn/libftdi.c:348 #, c-format -msgid "usbconn_ftdi_flush(): Error from ftdi_read_data(): %s\n" +msgid "%s(): ftdi_usb_purge_buffers() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:115 +#: src/tap/usbconn/libftdi.c:351 src/tap/usbconn/libftdi.c:368 #, c-format -msgid "usbconn_ftdi_flush(): Received less bytes than requested.\n" +msgid "%s(): ftdi_read_data() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:163 +#: src/tap/usbconn/libftdi.c:360 #, c-format -msgid "usbconn_ftdi_read(): Error from ftdi_read_data(): %s\n" +msgid "%s(): ftdi_usb_purge_rx_buffer() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:219 -msgid "usbconn_ftdi_write(): Send buffer does not exist.\n" +#: src/tap/usbconn/libftdi.c:365 +#, c-format +msgid "%s(): ftdi_usb_purge_tx_buffer() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:271 +#: src/tap/usbconn/libftdi.c:385 #, c-format -msgid "Connected to libftdi driver.\n" +msgid "%s(): ftdi_poll_status() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:390 src/tap/usbconn/libftdi.c:487 +#: src/tap/usbconn/libftdi.c:506 +#, c-format +msgid "%s(): ftdi_usb_reset() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:413 src/tap/usbconn/libftdi.c:479 +#, c-format +msgid "%s(): ftdi_disable_bitbang() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:417 src/tap/usbconn/libftdi.c:475 +#, c-format +msgid "%s(): ftdi_set_latency_timer() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:430 +#, c-format +msgid "%s(): ftdi_set_baudrate() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:483 +#, c-format +msgid "%s(): ftdi_set_bitmode() failed: %s\n" msgstr "" #, fuzzy #~ msgid "Syntax Error" #~ msgstr "Ikosa ry'imyandikire" +#, fuzzy +#~ msgid "Error in Standard Declarations" +#~ msgstr "Icyabitswe Uburebure" + +#, fuzzy +#~ msgid "Error in Attribute type identification" +#~ msgstr "Icyabitswe Uburebure" + +#, fuzzy +#~ msgid "Error in Type definition" +#~ msgstr "Icyabitswe Uburebure" + +#, fuzzy +#~ msgid "Error in Bit definition" +#~ msgstr "Icyabitswe Uburebure" + +#, fuzzy +#~ msgid "Error in Package Body definition" +#~ msgstr "Icyabitswe Uburebure" + +#, fuzzy +#~ msgid "Error in Cell Constant definition" +#~ msgstr "Icyabitswe Uburebure" + +#, fuzzy +#~ msgid "Error in Cell Data Record" +#~ msgstr "Ukwihuza Byanze" + #, fuzzy #~ msgid "Error in Cell_Type Function field" #~ msgstr "Ukwihuza Byanze" +#, fuzzy +#~ msgid "Error in BScan_Inst Instruction field" +#~ msgstr "Ukwihuza Byanze" + #, fuzzy #~ msgid "Cannot open file %s or %s.\n" #~ msgstr "Gufungura" diff --git a/jtag/po/sk.po b/jtag/po/sk.po index 48699a5b..72c4c30f 100644 --- a/jtag/po/sk.po +++ b/jtag/po/sk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: jtag 0.5.1\n" "Report-Msgid-Bugs-To: marcel@telka.sk\n" -"POT-Creation-Date: 2008-09-03 11:19-0400\n" +"POT-Creation-Date: 2008-09-13 22:55+0200\n" "PO-Revision-Date: 2003-10-08 21:25+0200\n" "Last-Translator: Marcel Telka \n" "Language-Team: Slovak \n" @@ -263,8 +263,8 @@ msgstr "" #: src/bus/buses.c:163 src/cmd/include.c:73 src/cmd/parse.c:59 #: src/cmd/parse.c:93 src/cmd/scan.c:88 src/cmd/shell.c:62 src/jtag.c:407 #: src/jtag.c:426 src/jtag.c:450 src/tap/detect.c:270 -#: src/tap/usbconn/libusb.c:150 src/tap/usbconn/libftd2xx.c:278 -#: src/tap/usbconn/libftdi.c:247 +#: src/tap/usbconn/libusb.c:150 src/tap/usbconn/libftd2xx.c:283 +#: src/tap/usbconn/libftdi.c:252 #, c-format msgid "Out of memory\n" msgstr "Nedostatok pamäte\n" @@ -948,7 +948,7 @@ msgstr "Neznámy kábel: %s\n" #: src/cmd/cable.c:98 src/tap/cable/ft2232.c:1288 #: src/tap/cable/generic_parport.c:82 src/tap/cable/generic_usbconn.c:211 -#: src/tap/cable/jim.c:68 src/tap/cable/usbblaster.c:77 +#: src/tap/cable/jim.c:68 src/tap/cable/usbblaster.c:79 #: src/tap/cable/vision_ep9307.c:199 src/tap/cable/wiggler.c:193 #, c-format msgid "%s(%d) malloc failed!\n" @@ -1336,12 +1336,12 @@ msgstr "zobraziÅ¥ túto pomoc" msgid "Please use the 'include' command instead of 'script'\n" msgstr "" -#: src/cmd/include.c:98 +#: src/cmd/include.c:100 #, fuzzy, c-format msgid "Unable to open file `%s go=%d'!\n" msgstr "Nepodarilo sa otvoriÅ¥ súbor `%s'!\n" -#: src/cmd/include.c:112 +#: src/cmd/include.c:114 #, fuzzy, c-format msgid "" "Usage: %s FILENAME [n] \n" @@ -1354,11 +1354,11 @@ msgstr "" "\n" "SÚBOR Názov súboru s príkazmi\n" -#: src/cmd/include.c:133 +#: src/cmd/include.c:135 msgid "include command sequence from external repository" msgstr "vložiÅ¥ sekvenciu príkazov zo Å¡tandardného externého súboru" -#: src/cmd/include.c:152 +#: src/cmd/include.c:154 msgid "run command sequence from external file" msgstr "spustiÅ¥ sekvenciu príkazov z externého súboru" @@ -1908,7 +1908,7 @@ msgstr "" msgid "write content of file to the memory" msgstr "" -#: src/flash/amd.c:276 +#: src/flash/amd.c:281 #, c-format msgid "" "Chip: AMD Flash\n" @@ -1917,8 +1917,8 @@ msgstr "" "ÄŒip: AMD Flash\n" "\tVýrobca: " -#: src/flash/amd.c:280 src/flash/amd.c:304 src/flash/amd.c:319 -#: src/flash/amd.c:337 src/flash/amd_flash.c:234 +#: src/flash/amd.c:285 src/flash/amd.c:309 src/flash/amd.c:324 +#: src/flash/amd.c:342 src/flash/amd_flash.c:234 #, c-format msgid "" "\n" @@ -1927,18 +1927,18 @@ msgstr "" "\n" "\tÄŒip: " -#: src/flash/amd.c:298 src/flash/amd.c:313 src/flash/amd.c:331 -#: src/flash/amd.c:343 src/flash/amd_flash.c:245 +#: src/flash/amd.c:303 src/flash/amd.c:318 src/flash/amd.c:336 +#: src/flash/amd.c:348 src/flash/amd_flash.c:245 #, c-format msgid "Unknown (ID 0x%04x)" msgstr "Neznámy (ID 0x%04x)" -#: src/flash/amd.c:348 +#: src/flash/amd.c:353 #, fuzzy, c-format msgid "Unknown manufacturer (ID 0x%04x) Chip (ID 0x%04x)" msgstr "Neznámy výrobca (ID 0x%04x)" -#: src/flash/amd.c:351 src/flash/amd_flash.c:248 +#: src/flash/amd.c:356 src/flash/amd_flash.c:248 #, c-format msgid "" "\n" @@ -1947,20 +1947,20 @@ msgstr "" "\n" "\tChránené: %04x\n" -#: src/flash/amd.c:423 src/flash/amd.c:435 src/flash/amd.c:447 +#: src/flash/amd.c:428 src/flash/amd.c:440 src/flash/amd.c:452 #: src/flash/detectflash.c:106 src/flash/detectflash.c:136 msgid "AMD/Fujitsu Standard Command Set" msgstr "Å tandardná množina príkazov AMD/Fujitsu" -#: src/flash/amd.c:424 +#: src/flash/amd.c:429 msgid "supported: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit" msgstr "podporované: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 bitov" -#: src/flash/amd.c:436 +#: src/flash/amd.c:441 msgid "supported: AMD 29LV800B; 1x16 Bit" msgstr "podporované: AMD 29LV800B; 1x16 bitov" -#: src/flash/amd.c:448 +#: src/flash/amd.c:453 #, fuzzy msgid "supported: AMD 29LV160, AMD 29LV065D, AMD 29LV040B; 1x8 Bit" msgstr "podporované: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 bitov" @@ -2835,7 +2835,7 @@ msgstr "%%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n" msgid "(none)" msgstr "(niÄ)" -#: src/svf/svf.c:347 src/svf/svf.c:518 src/svf/svf.c:852 src/svf/svf.c:856 +#: src/svf/svf.c:347 src/svf/svf.c:518 src/svf/svf.c:857 src/svf/svf.c:861 #, fuzzy, c-format msgid "out of memory" msgstr "nedostatok pamäte\n" @@ -2845,7 +2845,7 @@ msgstr "nedostatok pamäte\n" msgid "Error %s: mismatch at position %d for TDO\n" msgstr "" -#: src/svf/svf.c:590 src/svf/svf.c:991 +#: src/svf/svf.c:590 src/svf/svf.c:996 #, c-format msgid "Warning %s: command %s not implemented\n" msgstr "" @@ -2870,52 +2870,62 @@ msgstr "" msgid " This message is only displayed once.\n" msgstr "" -#: src/svf/svf.c:804 +#: src/svf/svf.c:658 +#, c-format +msgid "Error %s: Maximum cable clock frequency required for RUNTEST.\n" +msgstr "" + +#: src/svf/svf.c:659 +#, c-format +msgid " Set the cable frequency with 'FREQUENCY '.\n" +msgstr "" + +#: src/svf/svf.c:809 #, c-format msgid "Error %s: first %s command after length change must have a TDI value.\n" msgstr "" -#: src/svf/svf.c:829 +#: src/svf/svf.c:834 #, c-format msgid "Error %s: SIR command length inconsistent.\n" msgstr "" -#: src/svf/svf.c:926 +#: src/svf/svf.c:931 #, c-format msgid "Error %s: no further TRST command allowed after mode ABSENT\n" msgstr "" -#: src/svf/svf.c:946 +#: src/svf/svf.c:951 #, c-format msgid "Error %s: TRST ABSENT must not be issued after a STATE command\n" msgstr "" -#: src/svf/svf.c:952 +#: src/svf/svf.c:957 #, c-format msgid "Error %s: TRST ABSENT must not be issued after an SIR or SDR command\n" msgstr "" -#: src/svf/svf.c:962 +#: src/svf/svf.c:967 #, c-format msgid "Warning %s: unimplemented mode '%s' for TRST\n" msgstr "" -#: src/svf/svf.c:1046 +#: src/svf/svf.c:1052 #, fuzzy, c-format msgid "Error %s: no JTAG chain available\n" msgstr "Chyba: Nepodarilo sa zdetekovaÅ¥ koniec JTAG reÅ¥azca!\n" -#: src/svf/svf.c:1050 +#: src/svf/svf.c:1056 #, c-format msgid "Error %s: chain without any parts\n" msgstr "" -#: src/svf/svf.c:1066 +#: src/svf/svf.c:1072 #, c-format msgid "Error %s: could not establish SDR register\n" msgstr "" -#: src/svf/svf.c:1098 +#: src/svf/svf.c:1104 #, c-format msgid "Error %s: could not establish SIR instruction\n" msgstr "" @@ -3050,7 +3060,7 @@ msgid "" " or: cable %s ppi PPIDEV\n" "\n" "PORTADDR parallel port address (e.g. 0x378)\n" -"PPDEF ppdev device (e.g. /dev/parport0)\n" +"PPDEV ppdev device (e.g. /dev/parport0)\n" "PPIDEF ppi device (e.g. /dev/ppi0)\n" "\n" msgstr "" @@ -3111,7 +3121,12 @@ msgstr "JTAG kábel Mpcbdm" msgid "Ka-Ro TRITON Starterkit II (PXA255/250) JTAG Cable" msgstr "JTAG kábel pre Ka-Ro TRITON Starterkit II (PXA255/250)" -#: src/tap/cable/usbblaster.c:434 +#: src/tap/cable/usbblaster.c:102 +#, c-format +msgid "Warning: USB-Blaster frequency is fixed to %ld Hz\n" +msgstr "" + +#: src/tap/cable/usbblaster.c:442 #, c-format msgid "" "Usage: cable %s [vid=VID] [pid=PID] [desc=DESC] [driver=DRIVER]\n" @@ -3124,7 +3139,7 @@ msgid "" "\n" msgstr "" -#: src/tap/cable/usbblaster.c:450 +#: src/tap/cable/usbblaster.c:458 msgid "Altera USB-Blaster Cable" msgstr "" @@ -3191,7 +3206,7 @@ msgid "" " or: cable %s ppi PPIDEV [TDO,TRST,TDI,TCK,TMS,SRESET]\n" "\n" "PORTADDR parallel port address (e.g. 0x378)\n" -"PPDEF ppdev device (e.g. /dev/parport0)\n" +"PPDEV ppdev device (e.g. /dev/parport0)\n" "PPIDEF ppi device (e.g. /dev/ppi0)\n" "TDO, ... parallel port bit number, prepend '#' for inversion\n" " default is '%s'\n" @@ -3417,116 +3432,194 @@ msgstr "Inicializujem %s na ppdev porte %s\n" msgid "%s: Invalid state: %2X\n" msgstr "%s: Neplatný stav: %2X\n" -#: src/tap/usbconn/libftd2xx.c:97 -msgid "usbconn_ftd2xx_flush(): FT_Write() failed.\n" +#: src/tap/usbconn/libftd2xx.c:100 +#, c-format +msgid "%s(): FT_Write() failed.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:101 -msgid "usbconn_ftd2xx_flush(): Written fewer bytes than requested.\n" +#: src/tap/usbconn/libftd2xx.c:104 src/tap/usbconn/libftdi.c:89 +#, c-format +msgid "%s(): Written fewer bytes than requested.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:120 -msgid "usbconn_ftd2xx_flush(): Receive buffer does not exist.\n" +#: src/tap/usbconn/libftd2xx.c:123 src/tap/usbconn/libftdi.c:108 +#, c-format +msgid "%s(): Receive buffer does not exist.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:127 +#: src/tap/usbconn/libftd2xx.c:130 src/tap/usbconn/libftd2xx.c:190 #, c-format -msgid "usbconn_ftd2xx_flush(): Error from FT_Read(): %d\n" +msgid "%s(): Error from FT_Read(): %d\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:130 +#: src/tap/usbconn/libftd2xx.c:134 src/tap/usbconn/libftdi.c:119 #, c-format -msgid "usbconn_ftd2xx_flush(): Received less bytes than requested.\n" +msgid "%s(): Received less bytes than requested.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:186 +#: src/tap/usbconn/libftd2xx.c:256 src/tap/usbconn/libftdi.c:224 #, c-format -msgid "usbconn_ftd2xx_read(): Error from FT_Read(): %d\n" +msgid "%s(): Send buffer does not exist.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:251 -msgid "usbconn_ftd2xx_write(): Send buffer does not exist.\n" +#: src/tap/usbconn/libftd2xx.c:314 +#, c-format +msgid "Connected to libftd2xx driver.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:299 +#: src/tap/usbconn/libftd2xx.c:389 src/tap/usbconn/libftd2xx.c:431 +#: src/tap/usbconn/libftd2xx.c:450 src/tap/usbconn/libftd2xx.c:473 #, c-format -msgid "Connected to libftd2xx driver.\n" +msgid "%s(): Can't reset device.\n" +msgstr "" + +#: src/tap/usbconn/libftd2xx.c:391 src/tap/usbconn/libftd2xx.c:433 +#: src/tap/usbconn/libftd2xx.c:452 src/tap/usbconn/libftd2xx.c:475 +#, c-format +msgid "%s(): Can't purge RX buffer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:357 src/tap/usbconn/libftd2xx.c:399 -#: src/tap/usbconn/libftd2xx.c:418 src/tap/usbconn/libftd2xx.c:441 -msgid "Can't reset device.\n" +#: src/tap/usbconn/libftd2xx.c:394 src/tap/usbconn/libftd2xx.c:445 +#, c-format +msgid "%s(): Can't disable bitmode.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:359 src/tap/usbconn/libftd2xx.c:401 -#: src/tap/usbconn/libftd2xx.c:420 src/tap/usbconn/libftd2xx.c:443 -msgid "Can't purge RX buffer.\n" +#: src/tap/usbconn/libftd2xx.c:397 +#, c-format +msgid "%s(): Can't set latency timer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:362 src/tap/usbconn/libftd2xx.c:413 -msgid "Can't disable bitmode.\n" +#: src/tap/usbconn/libftd2xx.c:400 +#, c-format +msgid "%s(): Can't set baudrate.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:365 -msgid "Can't set latency timer.\n" +#: src/tap/usbconn/libftd2xx.c:436 +#, c-format +msgid "%s(): Can't set special characters.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:368 -msgid "Can't set baudrate.\n" +#: src/tap/usbconn/libftd2xx.c:442 +#, c-format +msgid "%s(): Can't set target latency timer.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:404 -msgid "Can't set special characters.\n" +#: src/tap/usbconn/libftd2xx.c:447 +#, c-format +msgid "%s(): Can't set MPSSE bitmode.\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:410 -msgid "Can't set target latency timer.\n" +#: src/tap/usbconn/libftdi.c:84 +#, c-format +msgid "%s(): ftdi_write_data() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftd2xx.c:415 -msgid "Can't set MPSSE bitmode.\n" +#: src/tap/usbconn/libftdi.c:115 src/tap/usbconn/libftdi.c:168 +#, c-format +msgid "%s(): Error from ftdi_read_data(): %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:85 -msgid "usbconn_ftdi_flush(): Written fewer bytes than requested.\n" +#: src/tap/usbconn/libftdi.c:286 +#, c-format +msgid "Connected to libftdi driver.\n" msgstr "" -#: src/tap/usbconn/libftdi.c:104 -msgid "usbconn_ftdi_flush(): Receive buffer does not exist.\n" +#: src/tap/usbconn/libftdi.c:323 +#, c-format +msgid "%s() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:111 +#: src/tap/usbconn/libftdi.c:348 #, c-format -msgid "usbconn_ftdi_flush(): Error from ftdi_read_data(): %s\n" +msgid "%s(): ftdi_usb_purge_buffers() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:115 +#: src/tap/usbconn/libftdi.c:351 src/tap/usbconn/libftdi.c:368 #, c-format -msgid "usbconn_ftdi_flush(): Received less bytes than requested.\n" +msgid "%s(): ftdi_read_data() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:163 +#: src/tap/usbconn/libftdi.c:360 #, c-format -msgid "usbconn_ftdi_read(): Error from ftdi_read_data(): %s\n" +msgid "%s(): ftdi_usb_purge_rx_buffer() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:219 -msgid "usbconn_ftdi_write(): Send buffer does not exist.\n" +#: src/tap/usbconn/libftdi.c:365 +#, c-format +msgid "%s(): ftdi_usb_purge_tx_buffer() failed: %s\n" msgstr "" -#: src/tap/usbconn/libftdi.c:271 +#: src/tap/usbconn/libftdi.c:385 #, c-format -msgid "Connected to libftdi driver.\n" +msgid "%s(): ftdi_poll_status() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:390 src/tap/usbconn/libftdi.c:487 +#: src/tap/usbconn/libftdi.c:506 +#, c-format +msgid "%s(): ftdi_usb_reset() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:413 src/tap/usbconn/libftdi.c:479 +#, c-format +msgid "%s(): ftdi_disable_bitbang() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:417 src/tap/usbconn/libftdi.c:475 +#, c-format +msgid "%s(): ftdi_set_latency_timer() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:430 +#, c-format +msgid "%s(): ftdi_set_baudrate() failed: %s\n" +msgstr "" + +#: src/tap/usbconn/libftdi.c:483 +#, c-format +msgid "%s(): ftdi_set_bitmode() failed: %s\n" msgstr "" #, fuzzy #~ msgid "Syntax Error" #~ msgstr "Chyba syntaxe!\n" +#, fuzzy +#~ msgid "Error in Standard Declarations" +#~ msgstr "Chyba: Neplatná dĺžka záznamu!\n" + +#, fuzzy +#~ msgid "Error in Attribute type identification" +#~ msgstr "Chyba: Neplatná dĺžka záznamu!\n" + +#, fuzzy +#~ msgid "Error in Type definition" +#~ msgstr "Chyba: Neplatná dĺžka záznamu!\n" + +#, fuzzy +#~ msgid "Error in Bit definition" +#~ msgstr "Chyba: Neplatná dĺžka záznamu!\n" + +#, fuzzy +#~ msgid "Error in Package Body definition" +#~ msgstr "Chyba: Neplatná dĺžka záznamu!\n" + +#, fuzzy +#~ msgid "Error in Cell Constant definition" +#~ msgstr "Chyba: Neplatná dĺžka záznamu!\n" + +#, fuzzy +#~ msgid "Error in Cell Data Record" +#~ msgstr "Chyba: Pripojenie kábla zlyhalo!\n" + #, fuzzy #~ msgid "Error in Cell_Type Function field" #~ msgstr "Chyba: Pripojenie kábla zlyhalo!\n" +#, fuzzy +#~ msgid "Error in BScan_Inst Instruction field" +#~ msgstr "Chyba: Pripojenie kábla zlyhalo!\n" + #, fuzzy #~ msgid "Cannot open file %s or %s.\n" #~ msgstr "Nepodarilo sa otvoriÅ¥ %s\n"