# Slovak translations for jtag package
# Copyright (C) 2003 ETC s.r.o.
# This file is distributed under the same license as the jtag package.
# Marcel Telka <marcel@telka.sk>, 2003.
#
msgid ""
msgstr ""
"Project-Id-Version: jtag 0.5.1\n"
"Report-Msgid-Bugs-To: marcel@telka.sk\n"
"POT-Creation-Date: 2007-12-23 14:06+0100\n"
"PO-Revision-Date: 2003-10-08 21:25+0200\n"
"Last-Translator: Marcel Telka <marcel@telka.sk>\n"
"Language-Team: Slovak <sk-i18n@lists.linux.sk>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: libbrux/cmd/cmd.c:44
#, c-format
msgid "%s: syntax error!\n"
msgstr "%s: chyba syntaxe!\n"

#: libbrux/cmd/cmd.c:48 libbrux/cmd/help.c:57
#, c-format
msgid "%s: unknown command\n"
msgstr "%s: neznámy príkaz\n"

#: libbrux/cmd/cmd_detectflash.c:41 src/cmd/eraseflash.c:47
#: src/cmd/flashmem.c:47 src/cmd/peekpoke.c:47 src/cmd/peekpoke.c:109
#: src/cmd/readmem.c:45
#, c-format
msgid "Error: Bus driver missing.\n"
msgstr "Chyba: Chýba ovládač zbernice.\n"

#: libbrux/cmd/cmd_detectflash.c:57
#, fuzzy, c-format
msgid ""
"Usage: %s ADDRESS\n"
"Detect flash memory type connected to a part.\n"
"\n"
"ADDRESS    Base address for memory region\n"
msgstr ""
"Použitie: %s\n"
"Detekovať typ flash pamäte pripojený k súčiastke.\n"

#: libbrux/cmd/cmd_detectflash.c:66
msgid "detect parameters of flash chips attached to a part"
msgstr "detekovať parametre čipov flash pripojených k súčiastke"

#: libbrux/cmd/help.c:39
#, c-format
msgid ""
"Command list:\n"
"\n"
msgstr ""
"Zoznam príkazov:\n"
"\n"

#: libbrux/cmd/help.c:41 src/cmd/cable.c:142
#, c-format
msgid "%-13s %s\n"
msgstr "%-13s %s\n"

#: libbrux/cmd/help.c:41
msgid "(no description available)"
msgstr "(popis je nedostupný)"

#: libbrux/cmd/help.c:42
#, c-format
msgid ""
"\n"
"Type \"help COMMAND\" for details about a particular command.\n"
msgstr ""
"\n"
"Napíšte \"help PRÍKAZ\" a získate podrobnosti o príslušnom príkaze.\n"

#: libbrux/cmd/help.c:66
#, c-format
msgid ""
"Usage: %s [COMMAND]\n"
"Print short help for COMMAND, or list of available commands.\n"
msgstr ""
"Použitie: %s [PRÍKAZ]\n"
"Vypísať krátku pomoc pre PRÍKAZ alebo zoznam dostupných príkazov.\n"

#: libbrux/cmd/help.c:73
msgid "display this help"
msgstr "zobraziť túto pomoc"

#: libbrux/cmd/quit.c:44
#, c-format
msgid ""
"Usage: %s\n"
"Exit from %s.\n"
msgstr ""
"Použitie: %s\n"
"Ukončit %s.\n"

#: libbrux/cmd/quit.c:51
msgid "exit and terminate this session"
msgstr "ukončiť toto sedenie"

#: libbrux/flash/amd.c:232
#, c-format
msgid ""
"Chip: AMD Flash\n"
"\tManufacturer: "
msgstr ""
"Čip: AMD Flash\n"
"\tVýrobca: "

#: libbrux/flash/amd.c:235
#, c-format
msgid "AMD"
msgstr "AMD"

#: libbrux/flash/amd.c:238
#, c-format
msgid "ST/Samsung"
msgstr ""

#: libbrux/flash/amd.c:241
#, c-format
msgid "Macronix"
msgstr ""

#: libbrux/flash/amd.c:244
#, c-format
msgid "Unknown manufacturer (ID 0x%04x)"
msgstr "Neznámy výrobca (ID 0x%04x)"

#: libbrux/flash/amd.c:247
#, c-format
msgid ""
"\n"
"\tChip: "
msgstr ""
"\n"
"\tČip: "

#: libbrux/flash/amd.c:250
#, fuzzy, c-format
msgid "Am29LV040B"
msgstr "Am29LV800B"

#: libbrux/flash/amd.c:253
#, c-format
msgid "Am29LV640D/Am29LV641D/Am29LV642D"
msgstr "Am29LV640D/Am29LV641D/Am29LV642D"

#: libbrux/flash/amd.c:256
#, c-format
msgid "Am29LV800B"
msgstr "Am29LV800B"

#: libbrux/flash/amd.c:259
#, fuzzy, c-format
msgid "MX29LV160B"
msgstr "Am29LV800B"

#: libbrux/flash/amd.c:262
#, fuzzy, c-format
msgid "AM29LV160DB"
msgstr "Am29LV800B"

#: libbrux/flash/amd.c:265
#, fuzzy, c-format
msgid "Am29LV065D"
msgstr "Am29LV800B"

#: libbrux/flash/amd.c:268
#, c-format
msgid "M29W320DT"
msgstr ""

#: libbrux/flash/amd.c:271
#, c-format
msgid "M29W320DB"
msgstr ""

#: libbrux/flash/amd.c:274
#, c-format
msgid "Unknown (ID 0x%04x)"
msgstr "Neznámy (ID 0x%04x)"

#: libbrux/flash/amd.c:277
#, c-format
msgid ""
"\n"
"\tProtected: %04x\n"
msgstr ""
"\n"
"\tChránené: %04x\n"

#: libbrux/flash/amd.c:347 libbrux/flash/amd.c:359 libbrux/flash/amd.c:371
#: libbrux/flash/detectflash.c:96 libbrux/flash/detectflash.c:126
msgid "AMD/Fujitsu Standard Command Set"
msgstr "Štandardná množina príkazov AMD/Fujitsu"

#: libbrux/flash/amd.c:348
msgid "supported: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 Bit"
msgstr "podporované: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 bitov"

#: libbrux/flash/amd.c:360
msgid "supported: AMD 29LV800B; 1x16 Bit"
msgstr "podporované: AMD 29LV800B; 1x16 bitov"

#: libbrux/flash/amd.c:372
#, fuzzy
msgid "supported: AMD 29LV160, AMD 29LV065D, AMD 29LV040B; 1x8 Bit"
msgstr "podporované: AMD 29LV640D, 29LV641D, 29LV642D; 2x16 bitov"

#: libbrux/flash/detectflash.c:56 src/readmem.c:55
#, c-format
msgid "Error: Missing bus driver!\n"
msgstr "Chyba: Chýba ovládač zbernice!\n"

#: libbrux/flash/detectflash.c:75
#, c-format
msgid "Flash not found!\n"
msgstr "Pamäť flash nebola nájdená!\n"

#: libbrux/flash/detectflash.c:86
#, c-format
msgid "Query identification string:\n"
msgstr "Identifikačný reťazec:\n"

#: libbrux/flash/detectflash.c:90 libbrux/flash/detectflash.c:120
msgid "null"
msgstr "nič"

#: libbrux/flash/detectflash.c:93 libbrux/flash/detectflash.c:123
msgid "Intel/Sharp Extended Command Set"
msgstr "Rozšírená sada príkazov Intel/Sharp"

#: libbrux/flash/detectflash.c:99 libbrux/flash/detectflash.c:129
#: libbrux/flash/intel.c:349 libbrux/flash/intel.c:361
#: libbrux/flash/intel.c:373
msgid "Intel Standard Command Set"
msgstr "Štandardná sada príkazov Intel"

#: libbrux/flash/detectflash.c:102 libbrux/flash/detectflash.c:132
msgid "AMD/Fujitsu Extended Command Set"
msgstr "Rozšírená sada príkazov AMD/Fujitsu"

#: libbrux/flash/detectflash.c:105 libbrux/flash/detectflash.c:135
msgid "Mitsubishi Standard Command Set"
msgstr "Štandardná sada príkazov Mitsubishi"

#: libbrux/flash/detectflash.c:108 libbrux/flash/detectflash.c:138
msgid "Mitsubishi Extended Command Set"
msgstr "Rozšírená sada príkazov Mitsubishi"

#: libbrux/flash/detectflash.c:111 libbrux/flash/detectflash.c:141
msgid "Page Write Command Set"
msgstr "Sada príkazov Page Write"

#: libbrux/flash/detectflash.c:114 libbrux/flash/detectflash.c:144
#: libbrux/flash/detectflash.c:188
msgid "unknown!!!"
msgstr "neznáma!!!"

#: libbrux/flash/detectflash.c:117
#, c-format
msgid ""
"\tPrimary Algorithm Command Set and Control Interface ID Code: 0x%04X (%s)\n"
msgstr ""
"\tID kód sady príkazov a riadiaceho rozhrania primárneho algoritmu: 0x%04X (%"
"s)\n"

#: libbrux/flash/detectflash.c:147
#, c-format
msgid ""
"\tAlternate Algorithm Command Set and Control Interface ID Code: 0x%04X (%"
"s)\n"
msgstr ""
"\tID kód sady príkazov a riadiaceho rozhrania alternatívneho algoritmu: 0x%"
"04X (%s)\n"

#: libbrux/flash/detectflash.c:150
#, c-format
msgid "Query system interface information:\n"
msgstr "Informácie systémového rozhrania:\n"

#: libbrux/flash/detectflash.c:151
#, c-format
msgid "\tVcc Logic Supply Minimum Write/Erase or Write voltage: %d mV\n"
msgstr ""
"\tVcc minimálne napäte zdroja logiky pre zápis/vymazávanie alebo zápis: %d "
"mV\n"

#: libbrux/flash/detectflash.c:152
#, c-format
msgid "\tVcc Logic Supply Maximum Write/Erase or Write voltage: %d mV\n"
msgstr ""
"\tVcc maximálne napätie zdroja logiky pre zápis/vymazávanie alebo zápis: %d "
"mV\n"

#: libbrux/flash/detectflash.c:153
#, c-format
msgid "\tVpp [Programming] Supply Minimum Write/Erase voltage: %d mV\n"
msgstr ""
"\tVpp [programovanie] minimálne napátie zdroja pre zápis/vymazanie: %d mV\n"

#: libbrux/flash/detectflash.c:154
#, c-format
msgid "\tVpp [Programming] Supply Maximum Write/Erase voltage: %d mV\n"
msgstr ""
"\tVpp [programovanie] maximálne napätie zdroja pre zápis/programovanie: %d "
"mV\n"

#: libbrux/flash/detectflash.c:155
#, c-format
msgid "\tTypical timeout per single byte/word program: %d us\n"
msgstr "\tTypický časový limit pre programovanie jedného bajtu/slova: %d µs\n"

#: libbrux/flash/detectflash.c:156
#, c-format
msgid "\tTypical timeout for maximum-size multi-byte program: %d us\n"
msgstr ""
"\tTypický časový limit pre programovanie maximálnej viacbajtovej sekvencie: %"
"d µs\n"

#: libbrux/flash/detectflash.c:157
#, c-format
msgid "\tTypical timeout per individual block erase: %d ms\n"
msgstr "\tTypický časový limit pre vymazanie jedného bloku: %d ms\n"

#: libbrux/flash/detectflash.c:158
#, c-format
msgid "\tTypical timeout for full chip erase: %d ms\n"
msgstr "\tTypický časový limit pre vymazanie celého čipu: %d ms\n"

#: libbrux/flash/detectflash.c:159
#, c-format
msgid "\tMaximum timeout for byte/word program: %d us\n"
msgstr "\tMaximálny časový limit pre programovanie bajtu/slova: %d µs\n"

#: libbrux/flash/detectflash.c:160
#, c-format
msgid "\tMaximum timeout for multi-byte program: %d us\n"
msgstr ""
"\tMaximálny časový limit pre programovanie viacbajtovej sekvencie: %d µs\n"

#: libbrux/flash/detectflash.c:161
#, c-format
msgid "\tMaximum timeout per individual block erase: %d ms\n"
msgstr "\tMaximálny časový limit pre vymazanie jedného bloku: %d ms\n"

#: libbrux/flash/detectflash.c:162
#, c-format
msgid "\tMaximum timeout for chip erase: %d ms\n"
msgstr "\tMaximálny časový limit pre vymazanie čipu: %d ms\n"

#: libbrux/flash/detectflash.c:165
#, c-format
msgid "Device geometry definition:\n"
msgstr "Definícia geometrie zariadenia:\n"

#: libbrux/flash/detectflash.c:166
#, c-format
msgid "\tDevice Size: %d B (%d KiB, %d MiB)\n"
msgstr "\tVeľkosť zariadenia: %d B (%d KiB, %d MiB)\n"

#: libbrux/flash/detectflash.c:173
msgid "x8"
msgstr "x8"

#: libbrux/flash/detectflash.c:176
msgid "x16"
msgstr "x16"

#: libbrux/flash/detectflash.c:179
msgid "x8/x16"
msgstr "x8/x16"

#: libbrux/flash/detectflash.c:182
msgid "x32"
msgstr "x32"

#: libbrux/flash/detectflash.c:185
msgid "x16/x32"
msgstr "x16/x32"

#: libbrux/flash/detectflash.c:191
#, c-format
msgid "\tFlash Device Interface Code description: 0x%04X (%s)\n"
msgstr "\tPopisný kód rozhrania flash zariadenia: 0x%04X (%s)\n"

#: libbrux/flash/detectflash.c:192
#, c-format
msgid "\tMaximum number of bytes in multi-byte program: %d\n"
msgstr "\tMaximálny počet bajtov pri viacbajtovom programovaní: %d\n"

#: libbrux/flash/detectflash.c:193
#, c-format
msgid "\tNumber of Erase Block Regions within device: %d\n"
msgstr "\tPočet oblastí vymazávnia blokov v zariadení: %d\n"

#: libbrux/flash/detectflash.c:194
#, c-format
msgid "\tErase Block Region Information:\n"
msgstr "\tInformácie o oblasti vymazávania blokov:\n"

#: libbrux/flash/detectflash.c:199
#, c-format
msgid "\t\tRegion %d:\n"
msgstr "\t\tOblasť %d:\n"

#: libbrux/flash/detectflash.c:200
#, c-format
msgid "\t\t\tErase Block Size: %d B (%d KiB)\n"
msgstr "\t\t\tVeľkosť vymazávacieho bloku: %d B (%d KiB)\n"

#: libbrux/flash/detectflash.c:203
#, c-format
msgid "\t\t\tNumber of Erase Blocks: %d\n"
msgstr "\t\t\tPočet vymazávacích blokov: %d\n"

#: libbrux/flash/intel.c:105
#, c-format
msgid "Manufacturer: %s\n"
msgstr "Výrobca: %s\n"

#: libbrux/flash/intel.c:108
#, c-format
msgid "Unknown manufacturer (0x%04X)!\n"
msgstr "Neznámy výrobva (0x%04X)!\n"

#: libbrux/flash/intel.c:112
#, c-format
msgid "Chip: "
msgstr "Čip: "

#: libbrux/flash/intel.c:164
#, c-format
msgid "Unknown (0x%02X)!\n"
msgstr "Neznámy (0x%02X)!\n"

#: libbrux/flash/intel.c:223
#, c-format
msgid "flash: invalid command seq\n"
msgstr "flash: neplatná sekvencia príkazov\n"

#: libbrux/flash/intel.c:226
#, c-format
msgid "flash: low vpen\n"
msgstr "flash: nízke vpen\n"

#: libbrux/flash/intel.c:229
#, c-format
msgid "flash: block locked\n"
msgstr "flash: blok uzamknutý\n"

#: libbrux/flash/intel.c:251
#, c-format
msgid "flash: unknown error while unblocking\n"
msgstr "flash: neznáma chyba pri odblokovaní\n"

#: libbrux/flash/intel.c:270
#, c-format
msgid "flash: unknown error while programming\n"
msgstr "flash: neznáma chyba pri programovaní\n"

#: libbrux/flash/intel.c:350
msgid "supported: 28Fxxxx, 2 x 16 bit"
msgstr "podporované: 28Fxxxx, 2 x 16 bitov"

#: libbrux/flash/intel.c:362
msgid "supported: 28Fxxxx, 1 x 16 bit"
msgstr "podporované: 28Fxxxx, 1 x 16 bitov"

#: libbrux/flash/intel.c:374
msgid "supported: 28Fxxxx, 1 x 8 bit"
msgstr "podporované: 28Fxxxx, 1 x 8 bitov"

#: src/bus/au1500.c:146 src/bus/au1500.c:156 src/bus/au1500.c:165
#: src/bus/au1500.c:171 src/bus/au1500.c:179 src/bus/bcm1250.c:318
#: src/bus/bcm1250.c:327 src/bus/bcm1250.c:334 src/bus/bcm1250.c:339
#: src/bus/bcm1250.c:344 src/bus/ixp425.c:281 src/bus/ixp425.c:290
#: src/bus/ixp425.c:299 src/bus/ixp425.c:306 src/bus/ixp425.c:311
#: src/bus/lh7a400.c:307 src/bus/lh7a400.c:316 src/bus/lh7a400.c:325
#: src/bus/lh7a400.c:334 src/bus/lh7a400.c:341 src/bus/lh7a400.c:346
#: src/bus/mpc824x.c:319 src/bus/mpc824x.c:326 src/bus/mpc824x.c:333
#: src/bus/mpc824x.c:340 src/bus/mpc824x.c:345 src/bus/mpc824x.c:350
#: src/bus/mpc824x.c:355 src/bus/mpc824x.c:360 src/bus/mpc824x.c:365
#: src/bus/mpc824x.c:372 src/bus/ppc440gx_ebc8.c:264
#: src/bus/ppc440gx_ebc8.c:273 src/bus/ppc440gx_ebc8.c:281
#: src/bus/ppc440gx_ebc8.c:286 src/bus/ppc440gx_ebc8.c:291
#: src/bus/pxa2x0.c:680 src/bus/pxa2x0.c:689 src/bus/pxa2x0.c:711
#: src/bus/pxa2x0.c:726 src/bus/pxa2x0.c:733 src/bus/pxa2x0.c:738
#: src/bus/pxa2x0.c:743 src/bus/pxa2x0.c:748 src/bus/s3c4510x.c:360
#: src/bus/s3c4510x.c:369 src/bus/s3c4510x.c:378 src/bus/s3c4510x.c:388
#: src/bus/s3c4510x.c:397 src/bus/s3c4510x.c:406 src/bus/s3c4510x.c:413
#: src/bus/sa1110.c:295 src/bus/sa1110.c:304 src/bus/sa1110.c:313
#: src/bus/sa1110.c:320 src/bus/sa1110.c:325 src/bus/sa1110.c:330
#: src/bus/sh7727.c:327 src/bus/sh7727.c:336 src/bus/sh7727.c:347
#: src/bus/sh7727.c:356 src/bus/sh7727.c:363 src/bus/sh7727.c:368
#: src/bus/sh7727.c:373 src/bus/sh7727.c:378 src/bus/sh7750r.c:309
#: src/bus/sh7750r.c:318 src/bus/sh7750r.c:327 src/bus/sh7750r.c:336
#: src/bus/sh7750r.c:343 src/bus/sh7750r.c:348 src/bus/sh7750r.c:353
#: src/bus/sh7750r.c:358 src/bus/sh7751r.c:302 src/bus/sh7751r.c:311
#: src/bus/sh7751r.c:320 src/bus/sh7751r.c:329 src/bus/sh7751r.c:336
#: src/bus/sh7751r.c:341 src/bus/tx4925.c:298 src/bus/tx4925.c:304
#: src/bus/tx4925.c:312 src/bus/tx4925.c:322 src/bus/tx4925.c:332
#: src/bus/tx4925.c:342 src/cmd/get.c:63 src/cmd/set.c:77
#, c-format
msgid "signal '%s' not found\n"
msgstr "signál '%s' nenájdený\n"

#: src/bus/au1500.c:224
#, fuzzy, c-format
msgid "AU1500 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel SA-1110 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/au1500.c:322
msgid "AU1500 BUS Driver via BSR"
msgstr ""

#: src/bus/bcm1250.c:104
#, c-format
msgid "Broadcom BCM1250 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Broadcom BCM1250 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %"
"d)\n"

#: src/bus/bcm1250.c:275
msgid "Broadcom BCM1250 compatible bus driver via BSR"
msgstr "Broadcom BCM1250 kompatibilný ovládač zbernice cez BSR"

#: src/bus/buses.c:85 src/cmd/include.c:47 src/detect.c:267 src/jtag.c:181
#: src/jtag.c:447 src/jtag.c:465 src/jtag.c:489
#, c-format
msgid "Out of memory\n"
msgstr "Nedostatok pamäte\n"

#: src/bus/ixp425.c:125
#, c-format
msgid "Intel IXP425 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel IXP425 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/ixp425.c:238
msgid "Intel IXP425 compatible bus driver via BSR"
msgstr "Intel IXP425 kompatibilný ovládač zbernice cez BSR"

#: src/bus/lh7a400.c:120
#, fuzzy, c-format
msgid "Sharp LH7A400 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Hitachi SH7750R kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %"
"d)\n"

#: src/bus/lh7a400.c:264
#, fuzzy
msgid "Sharp LH7A400 compatible bus driver via BSR (flash access only!)"
msgstr ""
"Hitachi SH7750R kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %"
"d)\n"

#: src/bus/mpc824x.c:134
#, fuzzy, c-format
msgid "Motorola MPC824x compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel PXA2x0 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/mpc824x.c:230
msgid "Base ROM Interface (Bank 1)"
msgstr ""

#: src/bus/mpc824x.c:239 src/bus/mpc824x.c:257
msgid "Base ROM Interface (Bank 0)"
msgstr ""

#: src/bus/mpc824x.c:389
#, fuzzy
msgid "Motorola MPC824x compatible bus driver via BSR"
msgstr "Intel PXA2x0 kompatibilný ovládač zbernice cez BSR"

#: src/bus/ppc440gx_ebc8.c:103
#, fuzzy, c-format
msgid ""
"IBM PowerPC 440GX 8-bit compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel IXP425 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/ppc440gx_ebc8.c:221
#, fuzzy
msgid "IBM PowerPC 440GX 8-bit EBC compatible bus driver via BSR"
msgstr "Intel IXP425 kompatibilný ovládač zbernice cez BSR"

#: src/bus/pxa2x0.c:183
#, c-format
msgid "Intel PXA2x0 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel PXA2x0 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/pxa2x0.c:194
#, fuzzy, c-format
msgid "Intel PXA27x compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel PXA2x0 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/pxa2x0.c:415 src/bus/pxa2x0.c:502
msgid "Static Chip Select 0"
msgstr "Statický výber čipu 0"

#: src/bus/pxa2x0.c:477
msgid "Memory Mapped registers (Memory Ctl)"
msgstr "Pamäťovo mapované registre (Memory Ctl)"

#: src/bus/pxa2x0.c:567
msgid "PXA270 internal address space (cfg, SRAM)"
msgstr ""

#: src/bus/pxa2x0.c:585
msgid "PXA270 SDRAM space (4x 64MB)"
msgstr ""

#: src/bus/pxa2x0.c:614
msgid "Intel PXA2x0 compatible bus driver via BSR"
msgstr "Intel PXA2x0 kompatibilný ovládač zbernice cez BSR"

#: src/bus/pxa2x0.c:630
#, fuzzy
msgid "Intel PXA27x compatible bus driver via BSR"
msgstr "Intel PXA2x0 kompatibilný ovládač zbernice cez BSR"

#: src/bus/s3c4510x.c:143
#, fuzzy, c-format
msgid ""
"Samsung S3C4510B compatibile bus driver via BSR (JTAG part No. %d) RCS0=%"
"ubit\n"
msgstr ""
"Samsung S3C4510B kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %"
"d)\n"

#: src/bus/s3c4510x.c:315
msgid "Samsung S3C4510B compatible bus driver via BSR"
msgstr "Samsung S3C4510B kompatibilný ovládač zbernice cez BSR"

#: src/bus/sa1110.c:108
#, c-format
msgid "Intel SA-1110 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel SA-1110 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/sa1110.c:252
msgid "Intel SA-1110 compatible bus driver via BSR"
msgstr "Intel SA-1110 kompatibilný ovládač zbernice cez BSR"

#: src/bus/sh7727.c:109
#, c-format
msgid "Hitachi SH7727 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Hitachi SH7727 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/sh7727.c:267
#, c-format
msgid "Error: Invalid bus width (MD3 = MD4 = 0)!\n"
msgstr "Chyba: Neplatná šírka zbernice (MD3 = MD4 = 0)!\n"

#: src/bus/sh7727.c:284
msgid "Hitachi SH7727 compatible bus driver via BSR"
msgstr "Hitachi SH7727 kompatibilný ovládač zbernice cez BSR"

#: src/bus/sh7750r.c:101
#, c-format
msgid "Hitachi SH7750R compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Hitachi SH7750R kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %"
"d)\n"

#: src/bus/sh7750r.c:266
msgid "Hitachi SH7750R compatible bus driver via BSR"
msgstr "Hitachi SH7750R kompatibilný ovládač zbernice cez BSR"

#: src/bus/sh7751r.c:99
#, c-format
msgid "Hitachi SH7751R compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Hitachi SH7751R kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %"
"d)\n"

#: src/bus/sh7751r.c:259
msgid "Hitachi SH7751R compatible bus driver via BSR"
msgstr "Hitachi SH7751R kompatibilný ovládač zbernice cez BSR"

#: src/bus/tx4925.c:143
#, fuzzy, c-format
msgid "Toshiba TX4925 compatible bus driver via BSR (JTAG part No. %d)\n"
msgstr ""
"Intel IXP425 kompatibilný ovládač zbernice cez BSR (JTAG súčiastka č. %d)\n"

#: src/bus/tx4925.c:256
#, fuzzy
msgid "Toshiba TX4925 compatible bus driver via BSR"
msgstr "Intel IXP425 kompatibilný ovládač zbernice cez BSR"

#: src/cmd/bit.c:61
#, c-format
msgid "%s: invalid number of parameters (%d) for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:66
#, c-format
msgid "%s: cable test failed for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:71 src/cmd/bus.c:46 src/cmd/dr.c:48 src/cmd/get.c:52
#: src/cmd/initbus.c:46 src/cmd/instruction.c:44 src/cmd/part.c:59
#: src/cmd/print.c:56 src/cmd/register.c:50 src/cmd/salias.c:49
#: src/cmd/set.c:53 src/cmd/signal.c:50
#, c-format
msgid "Run \"detect\" first.\n"
msgstr "Spustite najskôr \"detect\".\n"

#: src/cmd/bit.c:76 src/cmd/dr.c:53 src/cmd/get.c:57 src/cmd/initbus.c:51
#: src/cmd/instruction.c:49 src/cmd/register.c:55 src/cmd/salias.c:54
#: src/cmd/set.c:58 src/cmd/signal.c:55
#, c-format
msgid "%s: no active part\n"
msgstr "%s: nie je aktívna súčiastka\n"

#: src/cmd/bit.c:83
#, fuzzy, c-format
msgid "%s: missing Boundary Scan Register (BSR) for command '%s'\n"
msgstr "chýbajúci Boundary Scan Register (BSR)\n"

#: src/cmd/bit.c:89
#, c-format
msgid "%s: unable to get boundary bit number for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:94
#, fuzzy, c-format
msgid "%s: invalid boundary bit number for command '%s'\n"
msgstr "neplatné číslo hraničného bitu\n"

#: src/cmd/bit.c:98
#, fuzzy, c-format
msgid "%s: duplicate bit declaration for command '%s'\n"
msgstr "duplikátna deklarácia bitu\n"

#: src/cmd/bit.c:104
#, c-format
msgid "%s: invalid bit type length for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:129
#, fuzzy, c-format
msgid "%s: invalid bit type for command '%s'\n"
msgstr "flash: neplatná sekvencia príkazov\n"

#: src/cmd/bit.c:135
#, c-format
msgid "%s: invalid default value length for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:145
#, c-format
msgid "%s: out of memory for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:155
#, c-format
msgid "%s: unable to get control bit number for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:159
#, fuzzy, c-format
msgid "%s: invalid control bit number for command '%s'\n"
msgstr "neplatné číslo riadiaceho bitu\n"

#: src/cmd/bit.c:166
#, c-format
msgid "%s: invalid control value length for command '%s'\n"
msgstr ""

#: src/cmd/bit.c:184
#, c-format
msgid ""
"Usage: %s NUMBER TYPE DEFAULT SIGNAL [CBIT CVAL CSTATE]\n"
"Define new BSR (Boundary Scan Register) bit for SIGNAL, with\n"
"DEFAULT value.\n"
"\n"
"NUMBER        Bit number in the BSR\n"
"TYPE          Bit type, valid values are I, O, B, C, and X\n"
"DEFAULT       Default (safe) bit value, valid values are 1, 0, ?\n"
"SIGNAL        Associated signal name\n"
"CBIT          Control bit number\n"
"CVAL          Control value\n"
"CSTATE        Control state, valid state is only Z\n"
msgstr ""
"Použitie: %s ČÍSLO TYP PREDVOLENÉ SIGNÁL [RBIT RHOD RSTAV]\n"
"Definuje nový BSR (Boundary Scan Register) bit pre SIGNÁL,\n"
"s PREDVOLENOU hodnotou.\n"
"\n"
"ČÍSLO         Čislo bitu v BSR\n"
"TYP           Typ bitu, platné hodnoty sú I, O, B, C a X\n"
"PREDVOLENÉ    Predvolená (bezpečná) hodnota bitu,\n"
"                platné hodnoty sú 1, O, ?\n"
"SIGNÁL        Názov prideleného signálu\n"
"RBIT          Číslo riadiaceho bitu\n"
"RHOD          Riadiaca hodnota\n"
"RSTAV         Riadiaci stav, platný stav je len Z\n"

#: src/cmd/bit.c:200
msgid "define new BSR bit"
msgstr "definuje nový BSR bit"

#: src/cmd/bus.c:54
#, c-format
msgid "%s: invalid bus number\n"
msgstr "%s: neplatné číslo zbernice\n"

#: src/cmd/bus.c:67
#, c-format
msgid ""
"Usage: %s BUS\n"
"Change active bus.\n"
"\n"
"BUS           bus number\n"
msgstr ""
"Použitie: %s ZBERNICA\n"
"Zmeniť aktívnu zbernicu.\n"
"\n"
"ZBERNICA      číslo zbernice\n"

#: src/cmd/bus.c:76
msgid "change active bus"
msgstr "zmeniť aktívnu zbernicu"

#: src/cmd/cable.c:58
#, c-format
msgid "Note: the 'cable' command syntax changed, please read the help text\n"
msgstr ""

#: src/cmd/cable.c:76
#, fuzzy, c-format
msgid "Unknown cable type: %s\n"
msgstr "Neznámy kábel: %s\n"

#: src/cmd/cable.c:99
#, c-format
msgid "%s(%d) malloc failed!\n"
msgstr ""

#: src/cmd/cable.c:106
#, c-format
msgid "Error: Cable connection failed!\n"
msgstr "Chyba: Pripojenie kábla zlyhalo!\n"

#: src/cmd/cable.c:113
#, c-format
msgid "Error: Cable initialization failed!\n"
msgstr "Chyba: Inicializácia kábla zlyhala!\n"

#: src/cmd/cable.c:130
#, c-format
msgid ""
"Usage: %s DRIVER [DRIVER_OPTS]\n"
"Select JTAG cable type.\n"
"\n"
"DRIVER      name of cable\n"
"DRIVER_OPTS options for the selected cable\n"
"\n"
"Type \"cable DRIVER help\" for info about options for cable DRIVER.\n"
"\n"
"List of supported cables:\n"
msgstr ""

#: src/cmd/cable.c:147
msgid "select JTAG cable"
msgstr "nastaviť JTAG kábel"

#: src/cmd/cmd.c:113
#, c-format
msgid "Error: Cable not configured. Please use '%s' command first!\n"
msgstr ""
"Chyba: Kábel nie je nakonfigurovaný. Prosím najskôr použie príkaz '%s'!\n"

#: src/cmd/detect.c:83
#, c-format
msgid ""
"Usage: %s\n"
"Detect parts on the JTAG chain.\n"
"\n"
"Output from this command is a list of the detected parts.\n"
"If no parts are detected other commands may not work properly.\n"
msgstr ""
"Použitie: %s\n"
"Detekovať súčiastky v JTAG reťazci.\n"
"\n"
"Výstupom tohoto príkazu je zoznam zdetekovaných súčiastok.\n"
"Ak nie sú súčiastky zdetekované, ostatné príkazy nemusia fungovať\n"
"správne.\n"

#: src/cmd/detect.c:93
msgid "detect parts on the JTAG chain"
msgstr "detekovať súčiastky v JTAG reťazci"

#: src/cmd/discovery.c:51
#, c-format
msgid ""
"Usage: %s\n"
"Discovery of unknown parts in the JTAG chain.\n"
"\n"
"'%s' attempts to detect these parameters of an unknown JTAG\n"
"chain:\n"
" 1. IR (instruction register) length\n"
" 2. DR (data register) length for all possible instructions\n"
"\n"
"Warning: This may be dangerous for some parts (especially if the\n"
"part doesn't have TRST signal).\n"
msgstr ""
"Použitie: %s\n"
"Preskúmať neznáme súčiastky v JTAG reťazci.\n"
"\n"
"'%s' sa pokúša detekovať tieto parametre neznámeho JTAG\n"
"reťazca:\n"
" 1. dĺžku IR (inštrukčného registra)\n"
" 2. dĺžku DR (dátového rgistra) pre všetky možné inštrukcie\n"
"\n"
"Upozornenie: Toto môže byť nebezpečné pre niektoré súčiastky\n"
"(hlavne v prípade, ak súčiastka nemá TRST signál).\n"

#: src/cmd/discovery.c:66
msgid "discovery of unknown parts in the JTAG chain"
msgstr "preskúmať neznáme súčiastky v JTAG reťazci"

#: src/cmd/dr.c:58
#, c-format
msgid "%s: part without active instruction\n"
msgstr "%s: súčiastka bez aktívnej inštrukcie\n"

#: src/cmd/dr.c:62
#, c-format
msgid "%s: part without active data register\n"
msgstr "%s: súčiastka bez aktívneho dátového registra\n"

#: src/cmd/dr.c:79
#, c-format
msgid "%s: register length mismatch\n"
msgstr ""

#: src/cmd/dr.c:94
#, c-format
msgid "%s\n"
msgstr "%s\n"

#: src/cmd/dr.c:103
#, c-format
msgid ""
"Usage: %s [DIR]\n"
"Display input or output data register content.\n"
"\n"
"DIR           requested data register; possible values: 'in' for\n"
"                input and 'out' for output; default is 'out'\n"
msgstr ""
"Použitie: %s [SMER]\n"
"Zobraziť obsah vstupného alebo výstupného dátového registra.\n"
"\n"
"SMER          požadovaný dátový register; možné hodnoty sú: 'in'\n"
"                pre vstupný a 'out' pre výstupný; predvolená hodnota\n"
"                je 'out'\n"

#: src/cmd/dr.c:113
msgid "display active data register for a part"
msgstr "zobraziť akívny dátový register pre súčiastku"

#: src/cmd/endian.c:42
#, c-format
msgid "Endianess for external files: big\n"
msgstr "Poradie bajtov pre externé súbory: big endian\n"

#: src/cmd/endian.c:44
#, c-format
msgid "Endianess for external files: little\n"
msgstr "Poradie bajtov pre externé súbory: little endian\n"

#: src/cmd/endian.c:65
#, c-format
msgid ""
"Usage: %s\n"
"Set or print endianess for external files.\n"
msgstr ""
"Použitie: %s\n"
"Nastaviť alebo vypísať poradie bajtov pre externá súbory.\n"

#: src/cmd/endian.c:72
msgid "set/print endianess"
msgstr "nastaviť/vypísať poradie bajtov"

#: src/cmd/eraseflash.c:65
#, c-format
msgid ""
"Usage: %s ADDR BLOCKS\n"
"Erase flash memory from ADDR.\n"
"\n"
"ADDR       target addres for erasing block\n"
"BLOCKS     number of blocks to erase\n"
"\n"
"ADDR and BLOCKS could be in decimal or hexadecimal (prefixed with 0x) form.\n"
"\n"
"Supported Flash Memories:\n"
msgstr ""
"Použitie: %s ADRESA BLOKY\n"
"Vymazať pamäť flash od ADRESY.\n"
"\n"
"ADRESA     cieľová adresa pre vymazanie bloku\n"
"BLOKY      počet blokov na vymazanie\n"
"\n"
"ADRESA a BLOKY môžu byť v desiatkovom alebo šestnástkovom (začína s 0x)\n"
"tvare.\n"
"\n"
"Podporované pamäte flash:\n"

#: src/cmd/eraseflash.c:77 src/cmd/flashmem.c:89
#, c-format
msgid ""
"%s\n"
"     %s\n"
msgstr ""
"%s\n"
"     %s\n"

#: src/cmd/eraseflash.c:82
msgid "erase flash memory by number of blocks"
msgstr "vymazať pamäť flash podľa počtu blokov"

#: src/cmd/flashmem.c:57 src/cmd/include.c:54 src/jtag.c:454
#, c-format
msgid "Unable to open file `%s'!\n"
msgstr "Nepodarilo sa otvoriť súbor `%s'!\n"

#: src/cmd/flashmem.c:75
#, c-format
msgid ""
"Usage: %s ADDR FILENAME\n"
"Usage: %s FILENAME\n"
"Program FILENAME content to flash memory.\n"
"\n"
"ADDR       target address for raw binary image\n"
"FILENAME   name of the input file\n"
"%-10s FILENAME is in MS .bin format (for WinCE)\n"
"\n"
"ADDR could be in decimal or hexadecimal (prefixed with 0x) form.\n"
"\n"
"Supported Flash Memories:\n"
msgstr ""
"Použitie: %s ADRESA SÚBOR\n"
"Použitie: %s SÚBOR\n"
"Naprogramovať obsah SÚBORu do flash pamäte.\n"
"\n"
"ADRESA     cieľová adresa pre priamy binárny obraz\n"
"SÚBOR      názov vstupného súboru\n"
"%-10s SÚBOR je vo formáte MS .bin (pre WinCE)\n"
"\n"
"ADRESA môže byť v desiatkovom alebo šestnástkovom (začína s 0x) tvare.\n"
"\n"
"Podporované pamäte flash:\n"

#: src/cmd/flashmem.c:94
msgid "burn flash memory with data from a file"
msgstr "napáliť dáta zo súboru do pamäte flash"

#: src/cmd/frequency.c:40
#, c-format
msgid "Current TCK frequency is %u Hz\n"
msgstr "Aktuálna frekvencia TCK je %u Hz\n"

#: src/cmd/frequency.c:50
#, c-format
msgid "Setting TCK frequency to %u Hz\n"
msgstr "Nastavujem frekvenciu TCK na %u Hz\n"

#: src/cmd/frequency.c:60
#, c-format
msgid ""
"Usage: %s [FREQ]\n"
"Change TCK frequency to FREQ or print current TCK frequency.\n"
"\n"
"FREQ is in hertz. It's a maximum TCK frequency for JTAG interface.\n"
"In some cases the TCK frequency is less than FREQ, but the frequency\n"
"is never more than FREQ. Maximum supported frequency depends on JTAG\n"
"adapter.\n"
"\n"
"FREQ must be an unsigned integer. Minimum allowed frequency is 1 Hz.\n"
"Use 0 for FREQ to disable frequency limit.\n"
msgstr ""
"Použitie: %s [FREK]\n"
"Zmeniť frekvenciu TCK na FREK alebo vypísať aktuálnu frekvenciu TCK.\n"
"\n"
"FREK je v hertzoch. Je to maximálna frekvencia TCK pre JTAG rozhranie.\n"
"V niektorých prípadoch je frekvencia TCK menšia ako FREK, ale nikdy\n"
"nie je väčšia ako FREK. Maximálna podporovaná frekvencia závisí od\n"
"JTAG adapéra.\n"
"\n"
"FREK musí byť celé číslo bez znamienka. Minimálna povolená frekvencia\n"
"je 1 Hz. Ak chcete vypnúť obmedzenie frekvencie, použite 0 pre FREK.\n"

#: src/cmd/frequency.c:75
msgid "setup JTAG frequency"
msgstr "nastaviť JTAG frekvenciu"

#: src/cmd/get.c:68
#, c-format
msgid "%s = %d\n"
msgstr "%s = %d\n"

#: src/cmd/get.c:77
#, c-format
msgid ""
"Usage: %s SIGNAL\n"
"Get signal state from output BSR (Boundary Scan Register).\n"
"\n"
"SIGNAL        signal name (from JTAG declaration file)\n"
msgstr ""
"Použitie: %s SIGNÁL\n"
"Získať stav signálu z výstupného BSR (Boundary Scan Register).\n"
"\n"
"SIGNÁL        názov signálu (zo súboru JTAG deklarácií)\n"

#: src/cmd/get.c:86
msgid "get external signal value"
msgstr "získať hodnotu externého signálu"

#: src/cmd/include.c:65
#, c-format
msgid ""
"Usage: %s FILENAME\n"
"Run command sequence from external FILENAME from the repository.\n"
"\n"
"FILENAME      Name of the file with commands\n"
msgstr ""
"Použitie: %s SÚBOR\n"
"Spustiť sekvenciu príkazov z externého štandardného SÚBORu.\n"
"\n"
"SÚBOR         Názov súboru s príkazmi\n"

#: src/cmd/include.c:74
msgid "include command sequence from external repository"
msgstr "vložiť sekvenciu príkazov zo štandardného externého súboru"

#: src/cmd/initbus.c:59
#, c-format
msgid "bus initialization failed!\n"
msgstr "inicializácia zbernice zlyhala!\n"

#: src/cmd/initbus.c:67
#, c-format
msgid "Unknown bus: %s\n"
msgstr "Neznáma zbernica: %s\n"

#: src/cmd/initbus.c:78
#, c-format
msgid ""
"Usage: %s BUSNAME\n"
"Initialize new bus driver for active part.\n"
"\n"
"BUSNAME       Name of the bus\n"
"\n"
"List of available buses:\n"
msgstr ""
"Použitie: %s ZBERNICA\n"
"Inicializovať nový ovládač zbernice pre aktívnu súčiastku.\n"
"\n"
"ZBERNICA      Názov zbernice\n"
"\n"
"Zoznam dostupných zberníc:\n"

#: src/cmd/initbus.c:87
#, c-format
msgid "%-10s %s\n"
msgstr "%-10s %s\n"

#: src/cmd/initbus.c:92
msgid "initialize bus driver for active part"
msgstr "inicializovať ovládač zbernice pre aktívnu súčiastku"

#: src/cmd/instruction.c:58
#, c-format
msgid "%s: unknown instruction '%s'\n"
msgstr "%s: neznáma inštrukcia '%s'\n"

#: src/cmd/instruction.c:69
#, c-format
msgid "instruction length is already set and used\n"
msgstr "dĺžka inštrukcie je už nastavená a používaná\n"

#: src/cmd/instruction.c:84
#, c-format
msgid "invalid instruction length\n"
msgstr "neplatná dĺžka inštrukcie\n"

#: src/cmd/instruction.c:89
#, c-format
msgid "Instruction '%s' already defined\n"
msgstr "Inštrukcia '%s' je už definovaná\n"

#: src/cmd/instruction.c:95 src/cmd/register.c:71 src/cmd/register.c:85
#: src/cmd/salias.c:72 src/cmd/signal.c:88 src/detect.c:208 src/detect.c:231
#, c-format
msgid "out of memory\n"
msgstr "nedostatok pamäte\n"

#: src/cmd/instruction.c:104
#, c-format
msgid "unknown data register '%s'\n"
msgstr "neznámy dátový register '%s'\n"

#: src/cmd/instruction.c:118
#, c-format
msgid ""
"Usage: %s INSTRUCTION\n"
"Usage: %s length LENGTH\n"
"Usage: %s INSTRUCTION CODE REGISTER\n"
"Change active INSTRUCTION for a part or declare new instruction.\n"
"\n"
"INSTRUCTION   instruction name (e.g. BYPASS)\n"
"LENGTH        common instruction length\n"
"CODE          instruction code (e.g. 11111)\n"
"REGISTER      default data register for instruction (e.g. BR)\n"
msgstr ""
"Použitie: %s INŠTRUKCIA\n"
"Použitie: %s length DĹŽKA\n"
"Použitie: %s INŠTRUKCIA KÓD REGISTER\n"
"Zmeniť aktívnu INŠTRUKCIU pre súčiastku alebo deklarovať novú inštrukciu.\n"
"\n"
"INŠTRUKCIA    názov inštrukcie (napr. BYPASS)\n"
"DĹŽKA         spoločná dĺžka inštrukcií\n"
"KÓD           kód inštrukcie (napr. 11111)\n"
"REGISTER      predvolený dátový register pre inštrukciu (napr. BR)\n"

#: src/cmd/instruction.c:132
msgid "change active instruction for a part or declare new instruction"
msgstr ""
"zmeniť aktívnu inštrukciu pre súčiastku alebo deklarovať novú inštrukciu"

#: src/cmd/part.c:81
#, c-format
msgid "%s: invalid part number\n"
msgstr "%s: neplatné číslo súčiastky\n"

#: src/cmd/part.c:94
#, fuzzy, c-format
msgid ""
"Usage: %s PART\n"
"Change active part for current JTAG chain.\n"
"\n"
"PART          part number | alias\n"
msgstr ""
"Použitie: %s SÚČIASTKA\n"
"Zmeniť aktívnu súčiastku pre aktuálny JTAG reťazec.\n"
"\n"
"SÚČIASTKA     číslo súčiaskty\n"

#: src/cmd/part.c:103
msgid "change active part for current JTAG chain"
msgstr "zmeniť aktívnu súčiastku pre aktuálny JTAG reťazec"

#: src/cmd/peekpoke.c:62
#, fuzzy, c-format
msgid "bus_read(0x%08x) = 0x%02X (%i)\n"
msgstr "bus_read(0x%08x) = 0x%08X (%i)\n"

#: src/cmd/peekpoke.c:66
#, fuzzy, c-format
msgid "bus_read(0x%08x) = 0x%04X (%i)\n"
msgstr "bus_read(0x%08x) = 0x%08X (%i)\n"

#: src/cmd/peekpoke.c:69
#, c-format
msgid "bus_read(0x%08x) = 0x%08X (%i)\n"
msgstr "bus_read(0x%08x) = 0x%08X (%i)\n"

#: src/cmd/peekpoke.c:80
#, c-format
msgid ""
"Usage: %s ADDR\n"
"Read a single word (bus width size).\n"
"\n"
"ADDR       address to read from\n"
"\n"
"ADDR could be in decimal or hexadecimal (prefixed with 0x) form.\n"
"\n"
msgstr ""
"Použitie: %s ADRESA\n"
"Prečítať jedno slovo (s veľkosťou šírky zbernice).\n"
"\n"
"ADRESA     adresa, z ktorej čítať\n"
"\n"
"ADRESA môže byť v desiatkovom alebo šestnástkovom (začína s 0x) tvare.\n"

#: src/cmd/peekpoke.c:92
msgid "read a single word"
msgstr "prečítať jedno slovo"

#: src/cmd/peekpoke.c:131
#, fuzzy, c-format
msgid ""
"Usage: %s ADDR VAL [ADDR VAL] ... \n"
"Write a single word (bus width size).\n"
"\n"
"ADDR       address to write\n"
"VAL        value to write\n"
"\n"
"ADDR and VAL could be in decimal or hexadecimal (prefixed with 0x) form.\n"
"\n"
msgstr ""
"Použitie: %s ADRESA HODNOTA\n"
"Zapísať jedno slovo (s veľkosťou šírky zbernice).\n"
"\n"
"ADRESA     adresa pre zápis\n"
"HODNOTA    zapisovaná hodnota\n"
"\n"
"ADRESA a HODNOTA môžu byť v desiatkovom alebo šestnástkovom (začína s 0x)\n"
"tvare.\n"
"\n"

#: src/cmd/peekpoke.c:144
msgid "write a single word"
msgstr "zapísať jedno slovo"

#: src/cmd/print.c:82
#, c-format
msgid " No. %%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n"
msgstr "  Č. %%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n"

#: src/cmd/print.c:86 src/cmd/print.c:89 src/cmd/print.c:93
#, c-format
msgid "(%d) String conversion failed!\n"
msgstr "(%d) Konverzia reťazca zlyhala!\n"

#: src/cmd/print.c:87 src/cmd/print.c:91
msgid "Manufacturer"
msgstr "Výrobca"

#: src/cmd/print.c:87 src/cmd/print.c:91
msgid "Part"
msgstr "Súčiastka"

#: src/cmd/print.c:87 src/cmd/print.c:91
msgid "Stepping"
msgstr "Stupeň"

#: src/cmd/print.c:87 src/cmd/print.c:91
msgid "Instruction"
msgstr "Inštrukcia"

#: src/cmd/print.c:87 src/cmd/print.c:91
msgid "Register"
msgstr "Register"

#: src/cmd/print.c:105
#, fuzzy, c-format
msgid " %3d %s "
msgstr " %3d "

#: src/cmd/print.c:107 src/part/part.c:327
#, c-format
msgid " %3d "
msgstr " %3d "

#: src/cmd/print.c:119
#, c-format
msgid ""
"\n"
"Active bus:\n"
"*%d: "
msgstr ""
"\n"
"Aktívna zbernica:\n"
"*%d: "

#: src/cmd/print.c:124
#, c-format
msgid "Error in bus area discovery at 0x%08llX\n"
msgstr "Chyba pri zisťovaní oblasti zbernice na adrese 0x%08llX\n"

#: src/cmd/print.c:129
#, c-format
msgid "\tstart: 0x%08X, length: 0x%08llX, data width: %d bit, (%s)\n"
msgstr "\tzačiatok: 0x%08X, dĺžka: 0x%08llX, šírka údajov: %d bitov, (%s)\n"

#: src/cmd/print.c:131
#, c-format
msgid "\tstart: 0x%08X, length: 0x%08llX, data width: %d bit\n"
msgstr "\tzačiatok: 0x%08X, dĺžka: 0x%08llX, šírka údajov: %d bitov\n"

#: src/cmd/print.c:146
#, c-format
msgid "*%d: "
msgstr "*%d: "

#: src/cmd/print.c:148
#, c-format
msgid "%d: "
msgstr "%d: "

#: src/cmd/print.c:159
#, fuzzy, c-format
msgid ""
"Usage: %s [chain|bus|signals]\n"
"Display JTAG chain status.\n"
"\n"
"Display list of the parts connected to the JTAG chain including\n"
"part number and current (active) instruction and data register.\n"
msgstr ""
"Použitie: %s [chain|bus]\n"
"Zobraziť stav JTAG reťazca.\n"
"\n"
"Zobraziť zoznam súčiastok zapojených v JTAG reťazci vrátane čísla\n"
"súčiastky a aktuálnej (aktívnej) inštrukcie a dátového registra.\n"

#: src/cmd/print.c:169
msgid "display JTAG chain list/status"
msgstr "zobraziť zoznam/stav JTAG reťazca"

#: src/cmd/readmem.c:54
#, c-format
msgid "Unable to create file `%s'!\n"
msgstr "Nepodarilo sa vytvoriť súbor `%s'!\n"

#: src/cmd/readmem.c:67
#, c-format
msgid ""
"Usage: %s ADDR LEN FILENAME\n"
"Copy device memory content starting with ADDR to FILENAME file.\n"
"\n"
"ADDR       start address of the copied memory area\n"
"LEN        copied memory length\n"
"FILENAME   name of the output file\n"
"\n"
"ADDR and LEN could be in decimal or hexadecimal (prefixed with 0x) form.\n"
msgstr ""
"Použitie: %s ADRESA DĹŽKA SÚBOR\n"
"Kopírovať obsah pamäte zariadenia z ADRESY do SÚBORu.\n"
"\n"
"ADRESA     začiatočná adresa kopírovanej oblasti pamäte\n"
"DĹŽKA      dĺžka kopírovanej pamäte\n"
"SÚBOR      názov výstupného súboru\n"
"\n"
"ADRESA a DĹŽKA môžu byť v desiatkovom alebo šestnástkovom (začína s 0x) "
"tvare.\n"

#: src/cmd/readmem.c:80
msgid "read content of the memory and write it to file"
msgstr "čítať obsah pamäte a zapísať ho do súboru"

#: src/cmd/register.c:65
#, c-format
msgid "Data register '%s' already defined\n"
msgstr "Dátový register '%s' je už definovaný\n"

#: src/cmd/register.c:103
#, c-format
msgid ""
"Usage: %s NAME LENGTH\n"
"Define new data register with specified NAME and LENGTH.\n"
"\n"
"NAME          Data register name\n"
"LENGTH        Data register length\n"
msgstr ""
"Použitie: %s NÁZOV DĹŽKA\n"
"DEfinovať nový dátový register so zadaným NÁZVOM a DĹŽKOU.\n"
"\n"
"NÁZOV         Názov dátového registra\n"
"DĹŽKA         Dĺžka dátového registra\n"

#: src/cmd/register.c:113
msgid "define new data register for a part"
msgstr "definovať nový dátový register pre súčiastku"

#: src/cmd/reset.c:54
#, fuzzy, c-format
msgid ""
"Usage: %s\n"
"Reset current JTAG chain.\n"
msgstr "zmeniť aktívnu súčiastku pre aktuálny JTAG reťazec"

#: src/cmd/reset.c:61
#, fuzzy
msgid "reset JTAG chain"
msgstr "nastaviť JTAG kábel"

#: src/cmd/salias.c:60 src/cmd/signal.c:73
#, c-format
msgid "Signal '%s' already defined\n"
msgstr "Signál '%s' je už definovaný\n"

#: src/cmd/salias.c:66
#, fuzzy, c-format
msgid "Signal '%s' not found\n"
msgstr "signál '%s' nenájdený\n"

#: src/cmd/salias.c:86
#, fuzzy, c-format
msgid ""
"Usage: %s ALIAS SIGNAL\n"
"Define new signal ALIAS as alias for existing SIGNAL.\n"
"\n"
"ALIAS         New signal alias name\n"
"SIGNAL        Existing signal name\n"
msgstr ""
"Použitie: %s SIGNÁL [ZOZNAM...]\n"
"DEfinovať nový signál s názvom SIGNÁL pre súčiastku.\n"
"\n"
"SIGNÁL        Názov nového signálu\n"
"ZOZNAM        Zoznam nožičiek pre signál (nepoužité)\n"

#: src/cmd/salias.c:96
#, fuzzy
msgid "define an alias for a signal"
msgstr "definovať nový signál pre súčiastku"

#: src/cmd/script.c:50
#, fuzzy, c-format
msgid "Unable to open file `%s go=%d'!\n"
msgstr "Nepodarilo sa otvoriť súbor `%s'!\n"

#: src/cmd/script.c:62
#, fuzzy, c-format
msgid ""
"Usage: %s FILENAME [n] \n"
"Run command sequence n times from external FILENAME.\n"
"\n"
"FILENAME      Name of the file with commands\n"
msgstr ""
"Použitie: %s SÚBOR\n"
"Spustiť príkazovú sekvenciu z externého SÚBORu.\n"
"\n"
"SÚBOR         Názov súboru s príkazmi\n"

#: src/cmd/script.c:71
msgid "run command sequence from external file"
msgstr "spustiť sekvenciu príkazov z externého súboru"

#: src/cmd/set.c:89
#, c-format
msgid ""
"Usage: %s SIGNAL DIR [DATA]\n"
"Set signal state in input BSR (Boundary Scan Register).\n"
"\n"
"SIGNAL        signal name (from JTAG declaration file)\n"
"DIR           requested signal direction; possible values: 'in' or 'out'\n"
"DATA          desired output signal value ('0' or '1'); used only if DIR\n"
"                is 'out'\n"
msgstr ""
"Použitie: %s SIGNÁL SMER [DÁTA]\n"
"Nastaviť stav signálu vo vstupnom BSR (Boundary Scan Register).\n"
"\n"
"SIGNÁL        názov signálu (zo súboru JTAG deklarácií)\n"
"SMER          požadovaný smer signálu; možné hodnoty sú: 'in' alebo 'out'\n"
"DÁTA          želaná hodnota výstupného signálu ('0' alebo '1'); použité "
"len\n"
"                ak SMER je 'out'\n"

#: src/cmd/set.c:101
msgid "set external signal value"
msgstr "nastaviť hodnotu externého signálu"

#: src/cmd/shift.c:60
#, c-format
msgid ""
"Usage: %s\n"
"Usage: %s\n"
"Shift instruction or data register through JTAG chain.\n"
msgstr ""
"Použitie: %s\n"
"Použitie: %s\n"
"Posunúť inštrukčný alebo dátový register cez JTAG reťazec.\n"

#: src/cmd/shift.c:68
msgid "shift data/instruction registers through JTAG chain"
msgstr "posunúť dátové/inštrukčné registre cez JTAG reťazec"

#: src/cmd/signal.c:102
#, fuzzy, c-format
msgid ""
"Usage: %s SIGNAL [PIN#]\n"
"Define new signal with name SIGNAL for a part.\n"
"\n"
"SIGNAL\t\tNew signal name\n"
"PIN#   \tList of pin # for a signal\n"
msgstr ""
"Použitie: %s SIGNÁL [ZOZNAM...]\n"
"DEfinovať nový signál s názvom SIGNÁL pre súčiastku.\n"
"\n"
"SIGNÁL        Názov nového signálu\n"
"ZOZNAM        Zoznam nožičiek pre signál (nepoužité)\n"

#: src/cmd/signal.c:112
msgid "define new signal for a part"
msgstr "definovať nový signál pre súčiastku"

#: src/detect.c:56
#, c-format
msgid "Cannot open %s\n"
msgstr "Nepodarilo sa otvoriť %s\n"

#: src/detect.c:203
#, c-format
msgid "IR length: %d\n"
msgstr "Dĺžka IR: %d\n"

#: src/detect.c:219
#, c-format
msgid "Unable to detect JTAG chain length\n"
msgstr "Nepodarilo sa zdetekovať dĺžku JTAG reťazca\n"

#: src/detect.c:222
#, c-format
msgid "Chain length: %d\n"
msgstr "Dĺžka reťazca: %d\n"

#: src/detect.c:263
#, fuzzy, c-format
msgid "Device Id: %s (0x%016lX)\n"
msgstr "Id zariadenia: %s\n"

#: src/detect.c:285
#, c-format
msgid "  Unknown manufacturer!\n"
msgstr "  Neznámy výrobca!\n"

#: src/detect.c:291
#, c-format
msgid "  Manufacturer: %s\n"
msgstr "  Výrobca:   %s\n"

#: src/detect.c:293
#, c-format
msgid "Warning: Manufacturer too long\n"
msgstr "Upozornenie: Výrobca je príliš dlhý\n"

#: src/detect.c:309
#, c-format
msgid "  Unknown part!\n"
msgstr "  Neznáma súčiastka!\n"

#: src/detect.c:315
#, fuzzy, c-format
msgid "  Part(%d):         %s\n"
msgstr "  Súčiastka: %s\n"

#: src/detect.c:317
#, c-format
msgid "Warning: Part too long\n"
msgstr "Upozornenie: Súčiastka je príliš dlhá\n"

#: src/detect.c:333
#, c-format
msgid "  Unknown stepping!\n"
msgstr "  Neznámy stupeň!\n"

#: src/detect.c:339
#, c-format
msgid "  Stepping:     %s\n"
msgstr "  Stupeň:    %s\n"

#: src/detect.c:341
#, c-format
msgid "Warning: Stepping too long\n"
msgstr "Upozornenie: Stupeň je príliš dlhý\n"

#: src/detect.c:353
#, c-format
msgid "  Filename:     %s\n"
msgstr "  Súbor:     %s\n"

#: src/detect.c:368
#, c-format
msgid "Error: Unable to detect JTAG chain end!\n"
msgstr "Chyba: Nepodarilo sa zdetekovať koniec JTAG reťazca!\n"

#: src/discovery.c:113
#, c-format
msgid "Detecting IR length ... "
msgstr "Detekujem dĺžku IR ... "

#: src/discovery.c:119 src/discovery.c:151
#, c-format
msgid "%d\n"
msgstr "%d\n"

#: src/discovery.c:122
#, c-format
msgid "Error: Invalid IR length!\n"
msgstr "Chyba: Neplatná dĺžka IR!\n"

#: src/discovery.c:133
#, c-format
msgid "Error: Out of memory!\n"
msgstr "Chyba: Nedostatok pamäte!\n"

#: src/discovery.c:145
#, c-format
msgid "Detecting DR length for IR %s ... "
msgstr "Detekujem dĺžku DR pre IR %s ... "

#: src/flash.c:90
#, c-format
msgid "unknown flash - vendor id: %d (0x%04x)\n"
msgstr "neznáma flash pamäť - id dodávateľa: %d (0x%04x)\n"

#: src/flash.c:94
#, c-format
msgid "Flash not supported!\n"
msgstr "Nepodporovaná flash pamäť!\n"

#: src/flash.c:105 src/flash.c:253 src/flash.c:363
#, c-format
msgid "no flash driver found\n"
msgstr "ovládač pre flash pamäť nebol nájdený\n"

#: src/flash.c:116
#, c-format
msgid "Invalid sync sequence!\n"
msgstr "Neplatná synchronizačná sekvencia!\n"

#: src/flash.c:134
#, c-format
msgid "block %d unlocked\n"
msgstr "blok %d odomknutý\n"

#: src/flash.c:135 src/flash.c:284
#, c-format
msgid "erasing block %d: %d\n"
msgstr "vymazávam blok %d: %d\n"

#: src/flash.c:139 src/flash.c:272
#, c-format
msgid "program:\n"
msgstr "programovanie:\n"

#: src/flash.c:147 src/flash.c:187
#, c-format
msgid "Error: premature end of file\n"
msgstr "Chyba: neočakávaný koniec súboru\n"

#: src/flash.c:150 src/flash.c:190
#, c-format
msgid "record: start = 0x%08X, len = 0x%08X, checksum = 0x%08X\n"
msgstr "záznam: začiatok = 0x%08X, dĺžka = 0x%08X, kontrolná suma = 0x%08X\n"

#: src/flash.c:154 src/flash.c:194
#, c-format
msgid "Error: Invalid record length!\n"
msgstr "Chyba: Neplatná dĺžka záznamu!\n"

#: src/flash.c:161 src/flash.c:201 src/readmem.c:105
#, c-format
msgid "addr: 0x%08X"
msgstr "adresa: 0x%08X"

#: src/flash.c:166 src/flash.c:304
#, c-format
msgid ""
"\n"
"flash error\n"
msgstr ""
"\n"
"chyba flash\n"

#: src/flash.c:178 src/flash.c:315
#, c-format
msgid "verify:\n"
msgstr "kontrola:\n"

#: src/flash.c:207
#, c-format
msgid ""
"\n"
"verify error: 0x%08X vs. 0x%08X at addr %08X\n"
msgstr ""
"\n"
"chyba pri kontrole: 0x%08X vs. 0x%08X na adrese %08X\n"

#: src/flash.c:216 src/flash.c:349 src/readmem.c:113
#, c-format
msgid ""
"\n"
"Done.\n"
msgstr ""
"\n"
"Hotovo.\n"

#: src/flash.c:266
#, c-format
msgid "Out of memory!\n"
msgstr "Nedostatok pamäte!\n"

#: src/flash.c:283
#, c-format
msgid ""
"\n"
"block %d unlocked\n"
msgstr ""
"\n"
"blok %d odomknutý\n"

#: src/flash.c:292 src/flash.c:339
#, fuzzy, c-format
msgid "addr: 0x%08X\r"
msgstr "adresa: 0x%08X"

#: src/flash.c:327
#, c-format
msgid "Error during file read.\n"
msgstr "Chyba pri čítaní zo súboru.\n"

#: src/flash.c:344
#, c-format
msgid ""
"\n"
"verify error:\n"
"readed: 0x%08X\n"
"expected: 0x%08X\n"
msgstr ""
"\n"
"chyba pri kontrole:\n"
"načítané: 0x%08X\n"
"očakávané: 0x%08X\n"

#: src/flash.c:368
#, c-format
msgid ""
"\n"
"Erasing %d Flash block%s from address 0x%x\n"
msgstr ""

#: src/flash.c:373
#, c-format
msgid "(%d%% Completed) FLASH Block %d : Unlocking ... "
msgstr ""

#: src/flash.c:376
#, c-format
msgid "Erasing ... "
msgstr ""

#: src/flash.c:381
#, c-format
msgid "\r(100%% Completed) FLASH Block %d : Unlocking ... Erasing ... Ok.\n"
msgstr ""

#: src/flash.c:383
#, c-format
msgid "Ok.\r%78s\r"
msgstr ""

#: src/flash.c:386
#, c-format
msgid "ERROR.\n"
msgstr ""

#: src/flash.c:392
#, c-format
msgid ""
"\n"
"Erasing Completed.\n"
msgstr ""

#: src/flash.c:394
#, c-format
msgid ""
"\n"
"Erasing Failed.\n"
msgstr ""

#: src/jtag.c:344
#, c-format
msgid "'%s' must not be run suid root!\n"
msgstr ""

#: src/jtag.c:395
#, fuzzy, c-format
msgid "%s #%s\n"
msgstr "%-13s %s\n"

#: src/jtag.c:398
#, c-format
msgid "Usage: %s [OPTION] [FILE]\n"
msgstr ""

#: src/jtag.c:401
#, c-format
msgid "  -h, --help          display this help and exit\n"
msgstr ""

#: src/jtag.c:402
#, c-format
msgid "  -v, --version       display version information and exit\n"
msgstr ""

#: src/jtag.c:405
#, c-format
msgid "  -n, --norc          disable reading ~/.jtag/rc on startup\n"
msgstr ""

#: src/jtag.c:408
#, c-format
msgid "  [FILE]              file containing commands to execute\n"
msgstr ""

#: src/jtag.c:411
#, c-format
msgid "  Please report bugs at http://www.urjtag.org\n"
msgstr ""

#: src/jtag.c:418
#, c-format
msgid ""
"\n"
"%s #%s\n"
"\n"
"Copyright (C) 2002, 2003 ETC s.r.o.\n"
"Copyright (C) 2007, 2008 Kolja Waschk and the respective authors\n"
msgstr ""

#: src/jtag.c:423
#, c-format
msgid ""
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA\n"
msgstr ""

#: src/jtag.c:478
#, fuzzy, c-format
msgid ""
"\n"
"%s #%s\n"
"Copyright (C) 2002, 2003 ETC s.r.o.\n"
"Copyright (C) 2007, 2008 Kolja Waschk and the respective authors\n"
"\n"
"%s is free software, covered by the GNU General Public License, and you are\n"
"welcome to change it and/or distribute copies of it under certain "
"conditions.\n"
"There is absolutely no warranty for %s.\n"
"\n"
msgstr ""
"%s\n"
"Autorské práva © 2002, 2003 ETC s.r.o.\n"
"%s je voľný softvér, pokrytý Všeobecnou verejnou licenciou GNU a môžete ho\n"
"meniť a/alebo distribuovať jeho kópie za určitých podmienok.\n"
"Neposkytuje sa žiadna záruka pre %s.\n"
"\n"

#: src/jtag.c:493
#, fuzzy, c-format
msgid "WARNING: %s may damage your hardware!\n"
msgstr ""
"Upozornenie: %s môže poškodiť váš hardvér! Napíšte \"quit\" pre ukončenie!\n"
"\n"

#: src/jtag.c:494
#, fuzzy, c-format
msgid ""
"Type \"quit\" to exit, \"help\" for help.\n"
"\n"
msgstr ""
"Napíšte \"help\" pre získanie pomoci.\n"
"\n"

#: src/part/data_register.c:46
#, c-format
msgid "Warning: Data register name too long\n"
msgstr "Upozornenie: Názov dátového registra je príliš dlhý\n"

#: src/part/instruction.c:46
#, c-format
msgid "Warning: Instruction name too long\n"
msgstr "Upozornenie: Názov inštrukcie je príliš dlhý\n"

#: src/part/part.c:186 src/part/part.c:223
#, c-format
msgid "%s(%s:%d) Boundary Scan Register (BSR) not found\n"
msgstr "%s(%s:%d) Boundary Scan Register (BSR) nebol nájdený\n"

#: src/part/part.c:194
#, c-format
msgid "signal '%s' cannot be set as output\n"
msgstr "signál '%s' nemôže byť nastavený ako výstup\n"

#: src/part/part.c:204
#, c-format
msgid "signal '%s' cannot be set as input\n"
msgstr "signál '%s' nemôže byť nastavený ako vstup\n"

#: src/part/part.c:228
#, c-format
msgid "signal '%s' is not input signal\n"
msgstr "signál '%s' nie je vstupný\n"

#: src/part/part.c:245
#, c-format
msgid "%%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n"
msgstr "%%-%ds %%-%ds %%-%ds %%-%ds %%-%ds\n"

#: src/part/part.c:254 src/part/part.c:256
msgid "(none)"
msgstr "(nič)"

#: src/readmem.c:62
#, c-format
msgid "Error: Bus width detection failed\n"
msgstr "Chyba: Detekcia šírky zbernice zlyhala\n"

#: src/readmem.c:68
#, c-format
msgid "Unknown bus width!\n"
msgstr "Neznáma šírka zbernice!\n"

#: src/readmem.c:75
#, c-format
msgid "address: 0x%08X\n"
msgstr "adresa: 0x%08X\n"

#: src/readmem.c:76
#, c-format
msgid "length:  0x%08X\n"
msgstr "dĺžka:  0x%08X\n"

#: src/readmem.c:79
#, c-format
msgid "length is 0.\n"
msgstr "dĺžka je 0.\n"

#: src/readmem.c:85
#, c-format
msgid "reading:\n"
msgstr "čítam:\n"

#: src/tap/cable/arcom.c:104
msgid "Arcom JTAG Cable"
msgstr "JTAG kábel Arcom"

#: src/tap/cable/byteblaster.c:130
msgid ""
"Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port Download Cable"
msgstr ""
"JTAG kábel Altera ByteBlaster/ByteBlaster II/ByteBlasterMV pre paralelný port"

#: src/tap/cable/dlc5.c:101
msgid "Xilinx DLC5 JTAG Parallel Cable III"
msgstr "Xilinx DLC5 JTAG paralelný kábel III"

#: src/tap/cable/ea253.c:104
msgid "ETC EA253 JTAG Cable"
msgstr "JTAG kábel ETC EA253"

#: src/tap/cable/ei012.c:106
msgid "ETC EI012 JTAG Cable"
msgstr "JTAG kábel ETC EI012"

#: src/tap/cable/keithkoep.c:113
msgid "Keith & Koep JTAG cable"
msgstr "JTAG kábel Keith & Koep"

#: src/tap/cable/lattice.c:96
#, fuzzy
msgid "Lattice Parallel Port JTAG Cable"
msgstr "JTAG kábel Macraigor Wiggler"

#: src/tap/cable/mpcbdm.c:110
msgid "Mpcbdm JTAG cable"
msgstr "JTAG kábel Mpcbdm"

#: src/tap/cable/triton.c:115
msgid "Ka-Ro TRITON Starterkit II (PXA255/250) JTAG Cable"
msgstr "JTAG kábel pre Ka-Ro TRITON Starterkit II (PXA255/250)"

#: src/tap/cable/wiggler.c:113
msgid "Macraigor Wiggler JTAG Cable"
msgstr "JTAG kábel Macraigor Wiggler"

#: src/tap/cable/wiggler.c:129
#, fuzzy
msgid "Excelpoint IGLOO JTAG Cable"
msgstr "JTAG kábel Arcom"

#: src/tap/chain.c:114 src/tap/chain.c:145
#, c-format
msgid "%s(%d) Part %d without active instruction\n"
msgstr "%s(%d) Súčiastka %d bez aktívnej inštrukcie\n"

#: src/tap/chain.c:149
#, c-format
msgid "%s(%d) Part %d without data register\n"
msgstr "%s(%d) Súčiastka %d bez dátového registra\n"

#: src/tap/parport/direct.c:167 src/tap/parport/ppdev.c:119
#, c-format
msgid "Syntax error!\n"
msgstr "Chyba syntaxe!\n"

#: src/tap/parport/direct.c:174
#, c-format
msgid "Invalid port address!\n"
msgstr "Neplatná adresa portu!\n"

#: src/tap/parport/direct.c:186
#, c-format
msgid "Disconnecting %s from parallel port at 0x%x\n"
msgstr "Odpájam %s z paralelného portu na adrese 0x%x\n"

#: src/tap/parport/direct.c:192
#, fuzzy, c-format
msgid "Initializing parallel port at 0x%x\n"
msgstr "Inicializujem %s na paralelnom porte na adrese 0x%x\n"

#: src/tap/parport/direct.c:196 src/tap/parport/ppdev.c:134
#, c-format
msgid "%s(%d) Out of memory.\n"
msgstr "%s(%d) Nedostatok pamäte.\n"

#: src/tap/parport/ppdev.c:125
#, c-format
msgid "Disconnecting %s from ppdev port %s\n"
msgstr "Odpájam %s z ppdev portu %s\n"

#: src/tap/parport/ppdev.c:130
#, fuzzy, c-format
msgid "Initializing ppdev port %s\n"
msgstr "Inicializujem %s na ppdev porte %s\n"

#: src/tap/parport/ppdev.c:148
#, fuzzy, c-format
msgid "Could not open port %s: %s\n"
msgstr "Nepodarilo sa otvoriť %s\n"

#: src/tap/parport/ppdev.c:153
#, c-format
msgid "Could not claim ppdev device: %s\n"
msgstr ""

#: src/tap/tap.c:50 src/tap/tap.c:81 src/tap/tap.c:92
#, c-format
msgid "%s: Invalid state: %2X\n"
msgstr "%s: Neplatný stav: %2X\n"

#~ msgid "supported: AMD 29LV160; 1x8 Bit"
#~ msgstr "podporované: AMD 29LV160; 1x8 bitov"

#~ msgid "Unknown connection type: %s\n"
#~ msgstr "Neznámy typ pripojenia: %s\n"

#~ msgid ""
#~ "Usage: %s PORTADDR CABLE\n"
#~ "Usage: %s DEV CABLE\n"
#~ "Select JTAG cable connected to parallel port.\n"
#~ "\n"
#~ "PORTADDR   parallel port address (e.g. 0x378)\n"
#~ "CABLE      cable type\n"
#~ "DEV        ppdev device (e.g. /dev/parport0)\n"
#~ "\n"
#~ "List of supported cables:\n"
#~ "%-13s No cable connected\n"
#~ msgstr ""
#~ "Použitie: %s PORTADRESA KÁBEL\n"
#~ "Použitie: %s ZARIADENIE KÁBEL\n"
#~ "Nastaviť JTAG kábel pripojený k paralelnému portu.\n"
#~ "\n"
#~ "PORTADRESA adresa paralelného portu (napr. 0x378)\n"
#~ "KÁBEL      typ kábla\n"
#~ "ZARIADENIE zariadenie ppdev (napr. /dev/parport0)\n"
#~ "\n"
#~ "Zoznam podporovaných káblov:\n"
#~ "%-13s Žiaden kábel nepripojený\n"

#~ msgid "Note: Supported configuration is 2 x 16 bit or 1 x 16 bit only\n"
#~ msgstr ""
#~ "Poznámka: Podporovaná konfigurácia je len 2 x 16 bitov alebo 1 x 16 "
#~ "bitov\n"

#~ msgid "addr: 0x%08X\n"
#~ msgstr "adresa: 0x%08X\n"

#~ msgid "Changed cable to 'none'\n"
#~ msgstr "Kábel zmenený na 'žiaden'\n"