$Id$ See libbrux/NEWS for more news. * Added new JTAG declarations for - Hitachi HD64465 - Hitachi SH7729 (Beregnyei Balazs) - Motorola MPC8245 - Broadcom BCM4712 (partial, Alan Wallace) - Xilinx XCR3128XL-VQ100 (patch 1010714, Michael Lauer) - Xilinx XCR3032XL-VQ44 (patch 972621, Andrew Dyer) - Toshiba TX4925/TX4926 (patch 972621, Andrew Dyer) * Added new bus drivers: - Motorola MPC824x - AMD Alchemy Solutions Au1500 (patch 853883, Zhang Wei) - Toshiba TX4925 (patch 972625, Andrew Dyer) * Added new command 'salias'. * Explicit 'detectflash' command call is required before 'flashmem' command. * Fixed minor bugs (including bug 857039). * Fixed compiler error on Debian Woody (patch 986414, Martin Buck). * New translations: - French (Michel Robitaille) jtag-0.5.1 (2003-10-11): * Added new JTAG declarations for - Altera EP1C20F400 (Rojhalat Ibrahim) - Altera EPM7128AETC100 (Rojhalat Ibrahim) * Added additional checks for valid ByteBlaster cable connection and enabled all variants of the cable (patch 793313, Rojhalat Ibrahim). * Used real data bus width for data reading in PXA2x0, SA1110, and SH7727 bus drivers (based on patch 792591, thanks to Guennadi Liakhovetski). * Added 'initbus' command to allow dynamic bus driver loading. * Added support for flashes with multiple block erase regions for 'flashmem' (Bradley D. LaRonde). * Added BOOT_DEF register emulation for PXA2x0 bus driver. * Fixed inverted TRST signal for Macraigor Wiggler JTAG Cable see patch 799377 for more info, thanks to Mike Tesch for reporting). * Added Ka-Ro TRITON (PXA255/250) JTAG Cable driver (patch 805103, Andreas Mohr). * Spelling and documentation fixes (patch 805108, Andreas Mohr). * Fixed minor bugs. * Updated translations: - Slovak jtag-0.5 (2003-08-19): * Fixed bug with SELECT, AUTOFD, and STROBE signals handling (bug 745824). * Added new commands 'peek' and 'poke' (patch 747447, Matan Ziv-Av). * Fixed bugs in SH7727 bus driver (thanks to Rainer Dörken). * Added bus drivers for Hitachi SH7750R and Broadcom BCM1250 (patch 753300, Matan Ziv-Av). * Added bus driver for Hitachi SH7751R (patch 773533, Matan Ziv-Av). * Added bus width detection using MD3 and MD4 signals in SH7727 bus driver (thanks to Rainer Dörken). * Changes in 'discovery' command: - removed explicit JTAG chain length detection (patch 753298, Matan Ziv-Av) - simplified output messages - removed support for report results to file * Added new command 'part', syntax changes for 'set', 'get', 'dr', 'instruction', and 'print' commands. * Added support for multiple buses, added new 'bus' command to change active bus. * Added initial JTAG declarations for Broadcom BCM3310 (see support request 770145 for more info, thanks to Ramses VI). * Added JTAG declarations for Samsung S3C4510B (Jiun-Shian Ho). * Added bus driver for Samsung S3C4510X (Jiun-Shian Ho). * Fixed invalid memory allocation size (core dump) in jtag_parse_line() function. * Added new 'include' command. * Added new commands 'signal', 'register', 'bit', and enhanced 'instruction' command to allow create JTAG declarations from command line (or script). * Added new 'eraseflash' command (patch 772267, Thomas Fröhlich). * JTAG declarations are now executed as scripts. * Added support for parts without IDCODE instruction. * Added support for "downto" in bit vectors and "observe_only" into bsdl2jtag (patch 787346, Brad Parker). * Minor bugs fixed. * New translations: - Slovak jtag-0.4 (2003-05-29): * Added support for executing scripts directly from stdin (parameter '-'). * Disabled external bus cycles for PXA250 for addresses above 0x04000000. * Fixed bug in BUSY signal handling in Linux ppdev driver. * Optimized bus drivers to increase bus access speed (readmem, flashmem, ...). * Added new command 'endian' to configure access mode to external files. * Added JTAG declarations for - Broadcom BCM5421S (patch 743129, Matan Ziv-Av) - DEC SA1100 (thanks to Jachym Holecek) * Added bus driver for Hitachi SH7727 (based on patch 743140, Matan Ziv-Av). * Added support for printing current JTAG frequency. * Added support for 'signal' keyword (as alias for 'pin') into JTAG declarations. * Minor bugs fixed. jtag-0.3.2 (2003-04-04): * Added driver for Keith & Koep JTAG Cable. * Ported to NetBSD/i386 (Jachym Holecek). * Added JTAG declarations for Xilinx XCR3256XL-FT256 (Jachym Holecek). jtag-0.3.1 (2003-03-19): * Added support for Intel PXA255 A0 (thanks to Mike Sprauve). * Added support for running scripts specified as jtag command line parameters. * Added support for comments in scripts. Lines started with `#' are treated as comments. * Added support for Linux ppdev parallel port driver. Non-root users can use JTAG Tools now. * Added new `bsdl2jtag' conversion tool (Matan Ziv-Av). jtag-0.3 (2003-02-25): * Changes in interactive commands: - enhanced 'dr' command functionality - new 'set signal' command - new 'get signal' command - new 'script' command (Alessandro Zummo) * Added support for JTAG cables: - Mpcbdm JTAG Cable (Christian Pellegrin) - Arcom JTAG Cable (patch 682310, Ian Campbell) * Added JTAG declarations for - Intel IXP425 (Christian Pellegrin) - Xilinx XC2C256-TQ144 (Alessandro Zummo) - Broadcom BCM1250 (Matan Ziv-Av) - Hitachi SH7727 (Matan Ziv-Av) * Added bus driver for Intel IXP425 (Christian Pellegrin). * Added support for all 6 static memory banks for Intel SA1110 (bug 682660). * Added support for bidirectional 'B' boundary scan bits (Christian Pellegrin). * Added support for 1 x 16 bit memory configuration (Christian Pellegrin). * Added buffered file reads/writes (Christian Pellegrin). * Added support for flash drivers (August Hörandl). * Added flash driver for AMD chips (August Hörandl). * Added support for rc and history files (Alessandro Zummo). * Added support for localization. * Some bugs fixed. jtag-0.2.2 (2003-02-04): * Added new manufacturer: Cypress. (patch 669157, Chris Ellec) * Added new 'frequency' command to limit maximum TCK frequency * Added support for parallel ports with I/O addresses above 0x3FF jtag-0.2.1 (2003-01-13): * Fixed compile error (bug 665923, thanks to Chris Ellec). * Added support for Macraigor Wiggler JTAG Cable (Stas Khirman). * Added support for Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port Download Cable. * Fixed some other bugs. jtag-0.2 (2003-01-08): * Completed JTAG declarations for Xilinx XCR3128XL-CS144. * Fixed crash if flash memory is not detected. * Added new 'discovery' command for discovery unknown JTAG chains. * Added JTAG cable driver support and new 'cable' command. jtag-0.1 (2002-11-25): * Initial public release.