/*
 * $Id$
 *
 * Copyright (C) 2002, 2003 ETC s.r.o.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
 * 02111-1307, USA.
 *
 * Written by Marcel Telka <marcel@telka.sk>, 2002, 2003.
 *
 */

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

#include <stdio.h>
#include <string.h>

void
help( const char *cmd )
{
	if (!cmd)
		printf(
			"Command list:\n"
			"\n"
			"quit          exit from %s\n"
			"help          display this help\n"
			"detect        detect parts on the JTAG chain\n"
			"discovery     discovery unknown parts in the JTAG chain\n"
			"print         display JTAG chain list/status\n"
			"instruction   change active instruction for a part\n"
			"shift         shift data/instruction register through JTAG chain\n"
			"dr            display active data register for a part\n"
			"detectflash   detect parameters of flash chip attached to a part\n"
			"readmem       read content of the memory and write it to file\n"
			"flashmem      burn flash memory with data from a file\n"
			"set           TODO\n"
			"\n"
			"Type \"help COMMAND\" for details about particular command.\n", PACKAGE
		);
	else if (strcmp( cmd, "quit" ) == 0)
		printf(
			"Usage: quit\n"
			"Exit from %s.\n", PACKAGE
		);
	else if (strcmp( cmd, "help" ) == 0)
		printf(
			"Usage: help [COMMAND]\n"
			"Print short help for COMMAND, or list of available commands.\n"
		);
	else if (strcmp( cmd, "detect" ) == 0)
		printf(
			"Usage: detect\n"
			"Detect parts on the JTAG chain.\n"
			"\n"
			"Output from this command is a list of the detected parts.\n"
			"If no parts are detected other commands may not work properly.\n"
		);
	else if (strcmp( cmd, "discovery" ) == 0)
		printf(
			"Usage: discovery FILENAME\n"
			"Discovery unknown parts in the JTAG chain.\n"
			"\n"
			"Detail output (report) is directed to the FILENAME.\n"
			"'discovery' attempt to detect these parameters of an unknown JTAG\n"
			"chain:\n"
			" 1. JTAG chain size (number of parts in the chain)\n"
			" 2. IR (instruction register) length\n"
			" 3. DR (data register) length for all possible instructions\n"
			"\n"
			"Warning: This may be dangerous for some parts (especially, if the\n"
			"part doesn't have TRST signal).\n"
		);
	else if (strcmp( cmd, "print" ) == 0)
		printf(
			"Usage: print\n"
			"Display JTAG chain status.\n"
			"\n"
			"Display list of the parts connected to the JTAG chain including\n"
			"part number and current (active) instruction and data register.\n"
		);
	else if (strcmp( cmd, "instruction" ) == 0)
		printf(
			"Usage: instruction PART INSTRUCTION\n"
			"Change active INSTRUCTION for a PART.\n"
			"\n"
			"PART          part number (see print command)\n"
			"INSTRUCTION   instruction name (e.g. BYPASS)\n"
		);
	else if (strcmp( cmd, "shift" ) == 0)
		printf(
			"Usage: shift ir\n"
			"Usage: shift dr\n"
			"Shift instruction or data register through JTAG chain.\n"
		);
	else if (strcmp( cmd, "dr" ) == 0)
		printf(
			"Usage: dr PART\n"
			"Display data register content.\n"
			"\n"
			"PART          part number (see print command)\n"
		);
	else if (strcmp( cmd, "detectflash" ) == 0)
		printf(
			"Usage: detectflash\n"
			"Detect flash memory type connected to part.\n"
			"\n"
			"Only detects flash connected to part 0. Part 0 must support\n"
			"bus operations.\n"
		);
	else if (strcmp( cmd, "readmem" ) == 0)
		printf(
			"Usage: readmem ADDR LEN FILENAME\n"
			"Copy device memory content starting with ADDR to FILENAME file.\n"
			"\n"
			"ADDR       start address of the copied memory area\n"
			"LEN        copied memory length\n"
			"FILENAME   name of the output file\n"
			"\n"
			"ADDR and LEN could be in decimal or hexadecimal (prefixed with 0x) form.\n"
			"\n"
			"readmem works only with part 0. Part 0 must support bus operations.\n"
		);
	else if (strcmp( cmd, "flashmem" ) == 0)
		printf(
			"Usage: flashmem ADDR FILENAME\n"
			"Usage: flashmem msbin FILENAME\n"
			"Program FILENAME content to flash memory.\n"
			"\n"
			"ADDR       target addres for raw binary image\n"
			"FILENAME   name of the input file\n"
			"msbin      FILENAME is in MS .bin format (for WinCE)\n"
			"\n"
			"ADDR could be in decimal or hexadecimal (prefixed with 0x) form.\n"
			"\n"
			"flashmem works only with part 0. Part 0 must support bus operations.\n"
		);
	else if (strcmp( cmd, "set" ) == 0)
		printf(
			"TODO\n"
		);
	else
		printf( "Invalid command.\n" );
}