You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
228 lines
7.0 KiB
Plaintext
228 lines
7.0 KiB
Plaintext
$Id$
|
|
|
|
JTAG Tools
|
|
~~~~~~~~~~
|
|
|
|
JTAG Tools is a software package which enables working with JTAG-aware
|
|
(IEEE 1149.1) hardware devices (parts) and boards through JTAG adapter.
|
|
|
|
This package has open and modular architecture with ability to writing
|
|
miscellanous extensions (like board testers, flash memory programmers,
|
|
and so on).
|
|
|
|
JTAG Tools package is free software, covered by the GNU General Public
|
|
License, and you are welcome to change it and/or distribute copies of it
|
|
under certain conditions. There is absolutely no warranty for JTAG Tools.
|
|
Please read COPYING file for more info.
|
|
|
|
Warning: This software may damage your hardware!
|
|
|
|
Feedback and contributions are welcome.
|
|
|
|
|
|
Supported operating systems
|
|
---------------------------
|
|
|
|
JTAG Tools should run on all x86 Unix like operating systems including
|
|
MS Windows 95/98/Me/NT/2000/XP with Cygwin installed.
|
|
|
|
Tested operating systems:
|
|
- RedHat Linux 8.0
|
|
- MS Windows 2000/XP + Cygwin
|
|
|
|
|
|
Supported hardware
|
|
------------------
|
|
|
|
JTAG adapters:
|
|
- various parallel port JTAG adapters
|
|
|
|
JTAG-aware parts (chips):
|
|
- Atmel ATmega128 (partial support)
|
|
- Intel SA1110
|
|
- Intel PXA250 (including C0 stepping)
|
|
- Intel PXA261/262
|
|
- Xilinx XCR3128XL-CS144
|
|
|
|
Flash chips (2 x 16 bit configuration only):
|
|
- Intel 28FxxxJ3A (28F320J3A, 28F640J3A, 28F128J3A)
|
|
- Intel 28FxxxK3 (28F640K3, 28F128K3, 28F256K3)
|
|
- Intel 28FxxxK18 (28F640K18, 28F128K18, 28F256K18)
|
|
|
|
|
|
Tested hardware
|
|
---------------
|
|
|
|
Intel SA1110 B2 + 2 x Intel 28F128J3A (Compaq iPaq H3630)
|
|
Intel SA1110 B4 + 2 x Intel 28F128J3A
|
|
Intel PXA250 B1 + 2 x Intel 28F128K3 (ETC WEP EP250)
|
|
Intel PXA250 C0 + 2 x Intel 28F128K3 (ETC WEP EP250)
|
|
Xilinx XCR3128XL-CS144 (ETC WEP EP250)
|
|
|
|
|
|
Required software
|
|
-----------------
|
|
|
|
Required only for MS Windows:
|
|
- Current Cygwin net installation from http://cygwin.com/
|
|
- ioperm package from http://openwince.sourceforge.net/ioperm/
|
|
|
|
Required for all systems:
|
|
- include package from http://openwince.sourceforge.net/include/
|
|
|
|
|
|
Build & installation instructions
|
|
---------------------------------
|
|
|
|
1. Download and install required software (see previous section).
|
|
2. Download and unpack jtag sources.
|
|
3. Setup your parallel cable configuration in src/tap/ctrl.c file.
|
|
Please set correct TCK, TDI, TMS, TRST, TDO and 'port' values in the file.
|
|
4. Run ./configure script. Use optional --with-include parameter.
|
|
See `./configure --help` for more info.
|
|
5. Run `make`.
|
|
6. Run `make install`.
|
|
|
|
|
|
Running JTAG tools
|
|
------------------
|
|
|
|
Connect your JTAG adapter between your PC and target device and turn
|
|
on your device.
|
|
|
|
To run JTAG tools type "jtag" and press <Enter>. jtag should start and
|
|
display some initial informations. Output should end with line like this:
|
|
|
|
jtag>
|
|
|
|
This is "jtag command prompt". Type "help" and press <Enter> for initial help
|
|
about available commands. To exit JTAG Tools type "quit" and press <Enter>.
|
|
|
|
===> First task: Detect parts on the JTAG chain.
|
|
|
|
Type "detect" at the jtag command prompt:
|
|
jtag> detect
|
|
|
|
Your output should looks like this:
|
|
|
|
Device Id: 01011001001001100100000000010011
|
|
Manufacturer: Intel
|
|
Part: PXA250
|
|
Stepping: C0
|
|
Filename: /usr/local/share/jtag/intel/pxa250/pxa260
|
|
|
|
If you get empty output or this error message
|
|
|
|
detect_parts: bad JTAG connection (TDO is 1)
|
|
|
|
your JTAG adapter is not connected properly, or your target board
|
|
doesn't work, or your JTAG-aware chip doesn't support JTAG ID detection
|
|
(IDCODE instruction).
|
|
|
|
"detect" command is required before all other commands.
|
|
|
|
===> Second task: Print current JTAG chain status.
|
|
|
|
Type "print" at the jtag command prompt. Here is an output example:
|
|
|
|
jtag> print
|
|
No. Manufacturer Part Stepping Instruction Register
|
|
----------------------------------------------------------------------------------------
|
|
0 Intel PXA250 C0 BYPASS BR
|
|
jtag>
|
|
|
|
===> Third task: Sample device pin status.
|
|
|
|
jtag> instruction 0 SAMPLE/PRELOAD
|
|
jtag> shift ir
|
|
jtag> shift dr
|
|
jtag> dr 0
|
|
10001100100000100001100101111111111111111110011011100000111011111111111111111111
|
|
11111111111111111111111111111111111111111111101111111101100000100010101000000000
|
|
00011111000000111010111111100000100001100100000000000000000111000011100000000000
|
|
00000000000000000000000000000001000000000000000000000000000000000000000000000000
|
|
11110000000000000000000000000000000000000000001000000000000000000000000000000000
|
|
0000000000
|
|
jtag> print
|
|
No. Manufacturer Part Stepping Instruction Register
|
|
----------------------------------------------------------------------------------------
|
|
0 Intel PXA250 C0 SAMPLE/PRELOAD BSR
|
|
jtag>
|
|
|
|
Note: BSR is "Boundary Scan Register"
|
|
|
|
===> Fourth task: Burn flash connected to the part.
|
|
|
|
jtag> flashmem 0 brux.b
|
|
0x00000000
|
|
Note: Supported configuration is 2 x 16 bit only
|
|
BOOT_SEL: Asynchronous 32-bit ROM
|
|
|
|
2 x 16 bit CFI devices detected (QRY ok)!
|
|
|
|
program:
|
|
block 0 unlocked
|
|
erasing block 0: 0
|
|
addr: 0x00002854
|
|
verify:
|
|
addr: 0x00002854
|
|
Done.
|
|
jtag>
|
|
|
|
or:
|
|
|
|
jtag> flashmem msbin xboot.bin
|
|
Note: Supported configuration is 2 x 16 bit only
|
|
BOOT_SEL: Asynchronous 32-bit ROM
|
|
|
|
2 x 16 bit CFI devices detected (QRY ok)!
|
|
|
|
block 0 unlocked
|
|
erasing block 0: 0
|
|
program:
|
|
record: start = 0x00000000, len = 0x00000004, checksum = 0x000001EB
|
|
record: start = 0x00000040, len = 0x00000008, checksum = 0x000001B0
|
|
record: start = 0x00001000, len = 0x00002B30, checksum = 0x00122CAB
|
|
record: start = 0x00004000, len = 0x00000160, checksum = 0x0000684B
|
|
record: start = 0x00005000, len = 0x00000054, checksum = 0x000008EE
|
|
record: start = 0x00005054, len = 0x00000030, checksum = 0x00000DA9
|
|
record: start = 0x00000000, len = 0x00001000, checksum = 0x00000000
|
|
|
|
verify:
|
|
record: start = 0x00000000, len = 0x00000004, checksum = 0x000001EB
|
|
record: start = 0x00000040, len = 0x00000008, checksum = 0x000001B0
|
|
record: start = 0x00001000, len = 0x00002B30, checksum = 0x00122CAB
|
|
record: start = 0x00004000, len = 0x00000160, checksum = 0x0000684B
|
|
record: start = 0x00005000, len = 0x00000054, checksum = 0x000008EE
|
|
record: start = 0x00005054, len = 0x00000030, checksum = 0x00000DA9
|
|
record: start = 0x00000000, len = 0x00001000, checksum = 0x00000000
|
|
|
|
Done.
|
|
jtag>
|
|
|
|
|
|
Contacts
|
|
--------
|
|
|
|
Homepage: http://openwince.sourceforge.net/jtag/
|
|
|
|
CVS repository: http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/openwince/jtag/
|
|
|
|
Please report and track bugs at (please use Category 'jtag'):
|
|
http://sourceforge.net/tracker/?group_id=52603&atid=469850
|
|
|
|
Mailing list (discussion, questions): openwince-list@lists.sourceforge.net
|
|
Subscribe: http://lists.sourceforge.net/mailman/listinfo/openwince-list
|
|
|
|
Mailing list (announce): openwince-announce@lists.sourceforge.net
|
|
Subscribe: http://lists.sourceforge.net/mailman/listinfo/openwince-announce
|
|
|
|
Patches and improvements are welcome at (please use Category 'jtag'):
|
|
http://sourceforge.net/tracker/?group_id=52603&atid=469852
|
|
|
|
Feature requests are welcome at (please use Category 'jtag'):
|
|
http://sourceforge.net/tracker/?group_id=52603&atid=469853
|
|
|
|
Support requests are welcome at (please use Category 'jtag'):
|
|
http://sourceforge.net/tracker/?group_id=52603&atid=469851
|