You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
5664 lines
226 KiB
Plaintext
5664 lines
226 KiB
Plaintext
2010-08-08 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/generic.c: fix TDO handling ingeneric_flush_using_transfer()
|
|
(Matthias Drochner)
|
|
|
|
2010-08-07 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/global/params.c (parse_param_lu): Accept unsigned values in hex format.
|
|
|
|
2010-07-31 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/bus/buses.c, src/flash/jedec.c, src/tap/cable.c: Convert to ARRAY_SIZE.
|
|
|
|
2010-07-30 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/analog/bf592/STEPPINGS: Add support for bf592-0.1.
|
|
|
|
* src/tap/cable/jim.c: Fix by Michael Walle for build failure due to older
|
|
cable struct setup.
|
|
|
|
2010-07-30 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/intel.c: issue CFI_INTEL_CMD_WRITE_TO_BUFFER when polling
|
|
SR_READY in buffered write (Michael Walle)
|
|
|
|
2010-07-30 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* include/urjtag/cable.h (URJ_CABLE_PARAM_KEY): Add new cable params for tdi,
|
|
tdo, tms, and tck for new GPIO cable driver.
|
|
* src/tap/cable.c (cable_param): Likewise.
|
|
* src/tap/cable_list.h: Add new GPIO cable driver entry.
|
|
* configure.ac, src/tap/Makefile.am: Likewise.
|
|
* src/tap/cable/gpio.c: New GPIO cable driver by Stefano Babic.
|
|
|
|
2010-07-18 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/apps/jtag/jtag.c (main): Do not abort running just because a user's
|
|
rc file is unparseable (or inaccessible).
|
|
|
|
* src/apps/jtag/jtag.c: Unify jtag home dir parsing and add support for
|
|
the Windows home env var names.
|
|
|
|
* src/apps/bsdl2jtag/bsdl2jtag.c, src/bsdl/bsdl.c, src/bsdl/vhdl_flex.l,
|
|
src/cmd/cmd_readmem.c, src/cmd/cmd_svf.c, src/cmd/cmd_writemem.c,
|
|
src/global/parse.c, src/tap/detect.c: Add "b" to the fopen() mode string
|
|
for Windows and such [2874517] by Daryl Tester.
|
|
|
|
2010-06-29 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/cable/generic_usbconn_list.h: Macro away duplicate ftdi lists.
|
|
|
|
* src/tap/cable/generic_usbconn.c: Extend help function to include some
|
|
ideas used by the FTDI help (show default vid/pid/driver). Also add an
|
|
extended help function to show additional help strings so sub-drivers
|
|
need not duplicate this function.
|
|
* src/tap/cable/generic_usbconn.h: Add prototype for new helper function.
|
|
* src/tap/cable/ft2232.c: Switch to new usbconn helper function and export
|
|
the FTDI-specific helper function so external FTDI drivers can use it.
|
|
* src/tap/usbconn/libftdx.h: Add prototype for new FTDI helper function.
|
|
* src/tap/cable/usbblaster.c: Switch to common FTDI helper function and
|
|
drop unused local ftdi code.
|
|
* src/tap/cable/ft2232_list.h: Drop now that ft2232 uses common code which
|
|
only needs the common list of drivers.
|
|
* src/tap/Makefile.am: Drop ft2232_list.h reference.
|
|
|
|
2010-06-28 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/cable/ice100.c: Drop local help stub and use common libusb one.
|
|
|
|
* src/tap/cable/generic_usbconn.h: Split help text out so sub-libusb drivers
|
|
can avoid manual string duplication.
|
|
* src/tap/cable/generic_usbconn.c: Use new libusb help string defines.
|
|
* src/tap/cable/ft2232.c: Likewise.
|
|
|
|
2010-06-24 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac: Merge libusb-0.x and libusb-1.x variables so that "libusb"
|
|
in the rest of the source tree isn't tied to a specific version.
|
|
* src/tap/cable/ice100.c: Convert API to libusb-1.x.
|
|
* src/tap/cable/jlink.c: Likewise.
|
|
* src/tap/cable/xpc.c: Likewise.
|
|
* src/tap/usbconn/libusb.c: Likewise.
|
|
* src/tap/usbconn/libusb.h: Create a small layer to convert the libusb-1.x
|
|
API to the older libusb-0.x API if we're building against that version.
|
|
|
|
* NEWS: Note new ice100/gnICE+ cable drivers.
|
|
* THANKS: Credit the ice100 authors.
|
|
|
|
2010-06-23 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac (fmax): Drop fmax check as it is no longer used.
|
|
* src/tap/cable/generic.c (fmax): Drop now unused fmax fallback.
|
|
|
|
* src/cmd/cmd_cable.c (cmd_cable_run): Fill out the cable->chain link.
|
|
* src/tap/cable/generic.c (urj_tap_cable_generic_disconnect): Clear the
|
|
cable->chain link once we're done with it.
|
|
|
|
* include/urjtag/cable.h (URJ_CABLE_DRIVER): Add a quirks field, and start
|
|
a set of quirks bitfields.
|
|
* src/tap/detect.c (urj_tap_detect_parts): Handle new oneshot quirk.
|
|
* src/tap/idcode.c (urj_tap_idcode): Likewise.
|
|
|
|
* configure.ac (URJ_DRIVER_SET[cable]): Add ice100.
|
|
* src/bfin/bfin.c (part_emulation_return): Force EMUIR to a NOP in case
|
|
the cable goes back to run-test-idle.
|
|
* src/tap/cable_list.h: Add ice100 cable drivers.
|
|
* src/tap/Makefile.am: Add ice100 cable drivers.
|
|
* src/tap/cable/ice100.c: New ice100 cable driver for Analog Devices, Inc.
|
|
Blackfin USB Emulator-100B.
|
|
* src/tap/cable/generic_usbconn_list.h: Add ice100 cable drivers.
|
|
|
|
2010-06-22 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/usbconn/libftdi.c (usbconn_ftdi_flush): Fix gcc printf warning.
|
|
|
|
* configure.ac: Have the libftdi + libusb-1.0 error give a tip about using
|
|
--with-async-mode with the libftdi package when erroring out.
|
|
|
|
2010-06-21 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/bus/bf518f_ezbrd.c (urj_bus_bf51x_bus): Fix copy & paste typo in name.
|
|
|
|
2010-06-16 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* acinclude.m4 (VL_LIB_READLINE): Add a --with[out]-readline configure
|
|
option so people can explicitly control support for the library.
|
|
|
|
* configure.ac (AC_CHECK_FUNCS): Check for geteuid and getuid functions.
|
|
* sysdep.h: Key off of HAVE_xxx defines for geteuid/getuid stubs.
|
|
|
|
* configure.ac (AC_CHECK_HEADERS): Move windows.h check here, as well as
|
|
IN/OUT namespace pollution checks.
|
|
* sysdep.h: Key off of HAVE_WINDOWS_H for windows.h include. Drop the
|
|
NO_W32_PSEUDO_MODIFIERS defines since they're in configure.ac now.
|
|
|
|
2010-06-15 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/bus/s3c4510x.c: Punt dead/useless cvs log info.
|
|
|
|
* src/tap/cable.c (urj_tap_cable_create): Call urj_bus_buses_delete() rather
|
|
than manipulate urj_bus directly so the urj_buses structure doesn't get
|
|
corrupted. Otherwise we segfault when changing cables after initializing a
|
|
bus: cable probe; detect; initbus ...; detectflash ...; cable probe; detect
|
|
* src/apps/jtag/jtag.c (cleanup): Call urj_bus_buses_free() to clean up all
|
|
buses and not just the active one.
|
|
http://blackfin.uclinux.org/gf/tracker/6028
|
|
|
|
2010-06-14 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac: Drop stropts.h check since parport code no longer uses it.
|
|
|
|
* configure.ac: Check for sys/wait.h usability.
|
|
* src/cmd/cmd_bfin.c: Include sys/wait.h when available since we use macros
|
|
from it, and change the mingw check to key off this header instead to make
|
|
things a bit more portable.
|
|
|
|
* src/tap/parport/ppi.c (ppi_connect): Fix return type to match expected,
|
|
and tweak style to match ppdev.c better.
|
|
|
|
* src/tap/idcode.c (urj_tap_idcode): Fix typo in comment (bits, not bytes),
|
|
fix local types so we don't mismatch signs, and avoid leaking register
|
|
allocations with the error handling.
|
|
|
|
* include/urjtag/bfin.h (scans), include/urjtag/bus.h (urj_bus_drivers),
|
|
include/urjtag/cable.h (urj_tap_cable_drivers), include/urjtag/flash.h
|
|
(urj_flash_flash_drivers), include/urjtag/params.h (urj_param_list_t.list),
|
|
include/urjtag/parport.h (urj_tap_parport_drivers),
|
|
include/urjtag/usbconn.h (urj_tap_usbconn_drivers), src/bfin/bfin.c
|
|
(scans), src/bus/buses.c (urj_bus_drivers, bus_param), src/flash/flash.c
|
|
(urj_flash_flash_drivers), src/tap/cable.c (urj_tap_cable_drivers),
|
|
src/tap/cable/generic_usbconn.c (urj_tap_cable_usbconn_cables),
|
|
src/tap/parport.c (urj_tap_parport_drivers), src/tap/usbconn.c
|
|
(urj_tap_usbconn_drivers): Constify drivers lists and a few related
|
|
structures to share more unmutable data in .rodata.
|
|
|
|
2010-05-19 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/amd.c, doc/UrJTAG.txt: [ 2996919 ] Support for MX29LV320C
|
|
|
|
2010-05-05 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/cmd/cmd_debug.c (string_to_log_level): Tweak the -1 sanity check to
|
|
avoid warnings from gcc about -1 not being an enum value.
|
|
|
|
2010-02-16 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/MANUFACTURERS: Use the official ADI name.
|
|
|
|
* doc/UrJTAG.txt: Document the misc files under data/.
|
|
|
|
* src/bfin/bfin-part-bfin.c (bfin_part_init): Add a few more checks to avoid
|
|
segfaults and change the asserts to log warnings.
|
|
|
|
2010-02-10 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bsdl/Makefile.am (vhdl_flex.$(OBJEXT), bsdl_flex.$(OBJEXT)):
|
|
Add prefix libbsdl_flex_la-. Depend on vhdl_bison.h and
|
|
bsdl_bison.h instead of vhdl_bison.$(OBJEXT) and
|
|
bsdl_bison.$(OBJEXT).
|
|
(bsdl_bison.$(OBJEXT)): Depend bsdl_bison.h.
|
|
* src/svf/Makefile.am (svf_flex.$(OBJEXT)): Add prefix
|
|
libsvf_flex_la-. Depend on svf_bison.h instead of
|
|
svf_bison.$(OBJEXT).
|
|
|
|
2010-02-10 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/tap/usbconn/libftdx.h (URJ_USBCONN_FTDI_MAXRECV): Define
|
|
to be (63 * 64) if HAVE_LIBFTDI_ASYNC_MODE defined.
|
|
* src/tap/usbconn/libftdi.c (usbconn_ftdi_flush): Use async
|
|
mode libftdi if HAVE_LIBFTDI_ASYNC_MODE defined.
|
|
* configure.ac: Check libusb-1.0 and libftdi async mode.
|
|
|
|
2010-02-09 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/urjtag.pc.in: Include -Llibdir in default output and let pkg-config
|
|
worry about filtering it properly.
|
|
|
|
2010-02-08 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* include/urjtag/cable.h (urj_tap_cable_usb_probe): New prototype.
|
|
* src/tap/cable/generic_usbconn.c (urj_tap_cable_usb_probe): New function
|
|
to autodetect USB cables.
|
|
* src/cmd/cmd_cable.c (cmd_cable_run): Add a new "probe" driver to call each
|
|
busses' autodetection routine.
|
|
|
|
* data/analog/bf592/bf592: Add missing common registers and instructions.
|
|
|
|
* src/bfin/bfin-part-bfin.c (bfin_init): Add BF548M and BF592.
|
|
* data/analog/PARTS: Add note that bfin_init() needs to be in sync.
|
|
|
|
* src/bfin/bfin.c (bfin_set_scan): Replace assert() with a more helpful error
|
|
message showing the instruction that had a problem with loading.
|
|
|
|
2010-02-08 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* include/urjtag/part.h (struct URJ_PART_PARAMS): Add wait_ready.
|
|
* include/urjtag/bfin.h (bfin_wait_clocks): Declare.
|
|
* include/urjtag/chain.h (urj_tap_chain_wait_ready): Declare.
|
|
* src/tap/chain.c (urj_tap_chain_wait_ready): New.
|
|
* src/tap/tap.c (urj_tap_defer_shift_register): Call
|
|
urj_tap_chain_wait_ready if Run-Test/Idle.
|
|
* src/bfin/bfin.c (bfin_wait_clocks): Define.
|
|
(part_emudat_defer_get): Call chain_wait_ready when Run-Test/Idle.
|
|
(part_emudat_get): Likewise.
|
|
* src/bfin/bfin-part-bfin.c: Include <sysdep.h>, <urjtag/chain.h>,
|
|
<urjtag/cable.h> and <urjtag/log.h>.
|
|
(bfin_wait_ready): New.
|
|
(bfin_part_init): Init wait_ready.
|
|
|
|
2010-02-06 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* include/urjtag/cable.h (enum action): Add URJ_TAP_CABLE_CLOCK_COMPACT.
|
|
* src/tap/cable/generic.c (do_one_queued_action): Handle
|
|
URJ_TAP_CABLE_CLOCK_COMPACT to turn off GCC warning.
|
|
* src/tap/cable/ft2232.c (ft2232_clock_compact_schedule): New.
|
|
(ft2232_flush): Compact consecutive clocks.
|
|
|
|
2010-02-05 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* acinclude.m4 (AS_VAR_APPEND): Fix a few typos.
|
|
|
|
* data/analog/bf592/bf592: New.
|
|
* data/analog/bf592/STEPPINGS: New.
|
|
* data/analog/PARTS: Add bf592.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Add
|
|
analog/bf592/STEPPINGS and analog/bf592/bf592.
|
|
|
|
* configure.ac: Enable quiet automake rules when available.
|
|
|
|
* include/urjtag/jtag.h (urj_big_endian, urj_endian_t, urj_get_file_endian,
|
|
urj_set_file_endian, urj_endian_to_string, urj_endian_from_string): Replace
|
|
exposed endian storage with dedicated functions for parsing endians.
|
|
* src/global/log-error.c (urj_big_endian): Drop local storage.
|
|
* src/cmd/cmd_endian.c: Centralize all endian functions here.
|
|
* src/bus/readmem.c (urj_bus_readmem): Switch to new endian file functions.
|
|
* src/bus/writemem.c (urj_bus_writemem): Likewise.
|
|
* src/flash/flash.c (urj_flashmem): Likewise.
|
|
|
|
* doc/UrJTAG.txt: Add gnICE+ and list supported Blackfin processors.
|
|
|
|
* src/urjtag.pc.in: Start a pkg-config .pc file.
|
|
* src/Makefile.am: Install urjtag.pc.
|
|
* configure.ac: Generate urjtag.pc from urjtag.pc.in.
|
|
* .gitignore: Ignore generated urjtag.pc.
|
|
|
|
* src/urjtag.pc.in (Libs.private): Add @LTLIBINTL@ for weird systems (OS X).
|
|
|
|
2010-02-04 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_gnice_init_common): Replace
|
|
argument frequency with is_ft2232h. Call ft2232_set_frequency
|
|
or ft2232h_set_frequency accordingly.
|
|
(ft2232_gnice_init, ft2232_gniceplus_init): Change accordingly.
|
|
(ft2232_armusbocd_init_common, ft2232_armusbocd_init,
|
|
ft2232_armusbtiny_h_init): Likewise.
|
|
|
|
2010-02-03 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* acinclude.m4 (AS_VAR_APPEND, m4_ifnblank): Provide fallback implementations
|
|
if autoconf is too old (<2.64).
|
|
|
|
2010-02-02 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/detect.c (urj_tap_detect_parts): Include bit/hex output in the
|
|
different messages so people don't have to manually pick apart the idcode
|
|
to add support for new parts.
|
|
|
|
2010-02-02 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bus/bf518f_ezbrd.c: New file.
|
|
* src/bus/buses_list.h (bus_drivers[]): Add bf518f_ezbrd and bf51x.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Add bf518f_ezbrd.c.
|
|
* configure.ac (URJ_DRIVER_SET): Add bf518f_ezbrd and bf51x.
|
|
* data/analog/bf518/STEPPINGS: Add bf518 silicon revision 0.1.
|
|
|
|
2010-02-02 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* data/analog/bf506/bf506: New.
|
|
* data/analog/bf506/STEPPINGS: New.
|
|
* data/analog/PARTS: Add bf506.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Add
|
|
analog/bf506/STEPPINGS and analog/bf506/bf506.
|
|
|
|
2010-02-02 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/tap/state.c (urj_tap_state_name): New.
|
|
(urj_tap_state_dump): New.
|
|
(urj_tap_state_dump_2): New.
|
|
(urj_tap_state_init): Call urj_tap_state_dump.
|
|
(urj_tap_state_done): Likewise.
|
|
(urj_tap_state_reset): Likewise.
|
|
(urj_tap_state_set_trst): Likewise.
|
|
(urj_tap_state_clock): Call urj_tap_state_dump_2.
|
|
|
|
2010-02-02 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/tap/usbconn/libftdi.c (usbconn_ftdi_write): Make sure
|
|
scheduled send bytes be less than URJ_USBCONN_FTDX_MAXSEND.
|
|
* src/tap/usbconn/libftd2xx.c (usbconn_ftd2xx_write): Likewise.
|
|
|
|
2010-02-01 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* tap/cable/ft2232.c (ft2232_gnice_done): Turn LED off when done.
|
|
|
|
2010-02-01 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/bus/bf537_stamp.c (ASYNC_MEM_BASE, ASYNC_MEM_SIZE, IS_ASYNC_ADDR,
|
|
ASYNC_BANK): Define.
|
|
(bf537_stamp_bus_area): Only accept IS_ASYNC_ADDR() addresses.
|
|
(select_flash): Set AMS[] based on ASYNC_BANK(adr).
|
|
(bf537_stamp_bus_read_start): Pass adr to select_flash().
|
|
(bf537_stamp_bus_write): Likewise.
|
|
|
|
2010-02-01 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bus/bf533_ezkit.c: Remove.
|
|
* src/bus/bf537_stamp.c (bf537_stamp_bus_new): Don't false alarm.
|
|
(bf537_stamp_bus_write): Deassert AOE when bus write.
|
|
(urj_bus_driver_t urj_bus_bf533_ezkit_bus): Define.
|
|
* src/bus/Makefile.am (libbus_la_SOURCES): Use bf537_stamp.c as
|
|
bf533_ezkit bus driver source file.
|
|
* po/POTFILES.in: Remove src/bus/bf533_ezkit.c.
|
|
|
|
2010-02-01 Michael Hennerich <michael.hennerich@analog.com>
|
|
Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bus/bf537_stamp.c (bus_params_t): Add aoe.
|
|
(AOE): Define.
|
|
(bf537_stamp_bus_new): Deal with ADDR[n], DATA[n] and AOE_B.
|
|
(bf537_stamp_bus_read_start): Assert AOE.
|
|
(bf537_stamp_bus_read_end): Deassert AOE.
|
|
(bf538f_ezkit_bus, bf526_ezkit_bus): Modify descriptions.
|
|
(urj_bus_bf52x_bus, urj_bus_bf53x_bus): Define.
|
|
* src/bus/buses.c (bus_drivers[]): Add urj_bus_bf52x_bus and
|
|
urj_bus_bf53x_bus.
|
|
* src/bus/buses_list.h: Add bf52x and bf53x.
|
|
* configure.ac: Add bf52x and bf53x bus drivers.
|
|
|
|
2010-01-29 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac: Unify duplicate driver logic into one macro which also allows
|
|
unifying of the duplicated lists.
|
|
|
|
* configure.ac: Unify calls to AC_CHECK_FUNCS.
|
|
|
|
* src/apps/jtag/jtag.c, src/bfin/bfin.c, src/svf/svf.c,
|
|
src/tap/parport/ppdev.c, src/tap/usbconn/libftd2xx.c,
|
|
src/tap/usbconn/libftdi.c, src/tap/usbconn/libusb.c, sysdep.h: Unify
|
|
system checks in the common sysdep.h header.
|
|
|
|
* src/cmd/cmd_bfin.c, src/flash/detectflash.c, sysdep.h: Unify ARRAY_SIZE
|
|
helper macro here.
|
|
|
|
* src/bus/buses_list.h, src/cmd/cmd_cable.c, src/cmd/cmd_cmd.c,
|
|
src/cmd/cmd_eraseflash.c, src/cmd/cmd_flashmem.c, src/cmd/cmd.h,
|
|
src/cmd/cmd_help.c, src/cmd/cmd_initbus.c, src/cmd/cmd_list.h,
|
|
src/tap/cable/ft2232_list.h, src/tap/cable_list.h, src/tap/usbconn_list.h:
|
|
Statically sort the structure lists so that we can mark them readonly and
|
|
thus share them across instances of urjtag.
|
|
|
|
* include/urjtag/bfin.h, src/bfin/bfin.c, src/bfin/bfin-part-bfin.c: Switch
|
|
from local register_value to common urj_tap_register_get_value.
|
|
|
|
2010-01-28 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/cmd/cmd_bfin.c: Replace one-insn-a-file option with dynamic instruction
|
|
counting so multi-instructions are properly parsed.
|
|
|
|
* include/urjtag/tap_register.h, src/tap/register.c: Add new helper functions
|
|
for setting tap registers based on hex/bit strings.
|
|
* src/cmd/cmd_dr.c: Drop parsing code in favor of new helper functions.
|
|
|
|
2010-01-28 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/mpc837x.c, src/bus/buses_list.h, src/bus/Makefile.am,
|
|
configure.ac, data/freescale/mpc8377/mpc8377, data/freescale/mpc8377/STEPPINGS,
|
|
data/freescale/PARTS, data/freescale/mpc8378/mpc8378, data/freescale/mpc8378/STEPPINGS,
|
|
data/freescale/mpc8379/mpc8379, data/freescale/mpc8379/STEPPINGS, data/Makefile.am,
|
|
po/POTFILES.in, THANKS:
|
|
freescale mpc837x bus driver and related jtag descriptions (Andrzej Jalowiecki)
|
|
|
|
2010-01-26 Arnim Laeuger <arniml>
|
|
|
|
* src/apps/jtag/jtag.c: quote whitespace in filenames with " in
|
|
readline completion
|
|
|
|
* src/global/parse.c: escape whitespace with '\' (Gaston Rodriguez)
|
|
quote whitespace with ' and "
|
|
|
|
2010-01-26 Jie Zhang <jie.zhang@analog.com>
|
|
Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac (AC_CONFIG_FILES): Add src/bfin/Makefile.
|
|
* include/urjtag/Makefile.am (pkginclude_HEADERS): Add bfin.h.
|
|
* include/urjtag/bfin.h: New file.
|
|
* include/urjtag/chain.h (struct URJ_CHAIN): Add main_part.
|
|
* include/urjtag/error.h (enum URJ_ERROR): Add URJ_ERROR_BFIN.
|
|
* include/urjtag/part.h (struct URJ_PART_PARAMS): Define.
|
|
(struct URJ_PART): Add params.
|
|
(urj_part_init_func_t): Typedef.
|
|
(struct URJ_PART_INIT): Define.
|
|
(urj_part_inits): Declare.
|
|
(urj_part_init_register): Declare.
|
|
(urj_part_find_init): Declare.
|
|
* include/urjtag/types.h (urj_part_params_t): Typedef.
|
|
(urj_part_init_t): Typedef.
|
|
* src/Makefile.am (SUBDIRS): Add bfin.
|
|
(liburjtag_la_LIBADD): Add bfin/libbfin.la.
|
|
* src/bfin/Makefile.am: New file.
|
|
* src/bfin/bfin-part-bfin.c: New file.
|
|
* src/bfin/bfin-part.c: New file.
|
|
* src/bfin/bfin-part.h: New file.
|
|
* src/bfin/bfin.c: New file.
|
|
* src/bfin/insn-gen.c: New file.
|
|
* src/cmd/Makefile.am (libcmd_la_SOURCES): Add cmd_bfin.c.
|
|
* src/cmd/cmd_bfin.c: New file.
|
|
* src/cmd/cmd_list.h: Add _URJ_CMD(bfin).
|
|
* src/global/log-error.c (urj_error_string): Handle URJ_ERROR_BFIN.
|
|
* src/part/part.c (urj_part_inits): Define.
|
|
(urj_part_alloc): Initialize params.
|
|
(urj_part_free): Free params.
|
|
(urj_part_init_register): New.
|
|
(urj_part_find_init): New.
|
|
* src/tap/detect.c (urj_tap_detect_parts): Do part initialization.
|
|
Initialize main_part.
|
|
|
|
* include/urjtag/bfin.h: Tweak header ifdef protection.
|
|
|
|
* src/cmd/cmd_bfin.c: Fix gcc warnings about unused asprintf() return.
|
|
|
|
2010-01-24 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c:
|
|
log with URJ_LOG_LEVEL_COMM instead of URJ_LOG_LEVEL_DETAIL
|
|
(Gaston Rodriguez)
|
|
|
|
2010-01-24 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* include/urjtag/xpcu.h: Remove unused header.
|
|
* include/urjtag/urjtag.h.in, include/urjtag/Makefile.am: Remove xpcu.h.
|
|
|
|
* src/tap/detect.c (urj_tap_detect_parts): Only pad hex output to the actual
|
|
register size rather than always 64 bits.
|
|
|
|
2010-01-24 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftd2xx.c: const urj_tap_usbconn_ftd2xx_driver
|
|
|
|
2010-01-23 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/cmd/cmd.h, src/cmd/cmd_list.h, src/cmd/cmd_cmd.c: Unify the list of
|
|
commands in one place.
|
|
|
|
* src/cmd/cmd_cmd.c (urj_cmd_run): Automatically show help for a command
|
|
when it fails with a syntax error.
|
|
|
|
* include/urjtag/flash.h (urj_flash_driver_t): Move name member up to start
|
|
of the structure to match other structures and make assumptions.
|
|
* src/flash/amd.c, src/flash/amd_flash.c, src/flash/intel.c: Re-order struct
|
|
initialization after re-ordering of the definition.
|
|
* src/cmd/cmd.h (urj_cmd_sort), src/cmd/cmd_cmd.c (_urj_cmd_alphasort): New
|
|
helper functions for sorting structure lists alphabetically.
|
|
* src/cmd/cmd_eraseflash.c (cmd_eraseflash_help), src/cmd/cmd_flashmem.c
|
|
(cmd_flashmem_help), src/cmd/cmd_initbus.c (cmd_initbus_help),
|
|
src/cmd/cmd_help.c (cmd_help_run), src/cmd/cmd_cable.c (cmd_cable_help):
|
|
Automatically sort lists before displaying them.
|
|
|
|
* src/cmd/cmd.h (urj_cmd_sort): Automatically calculate the longest name in
|
|
the array of structures.
|
|
* src/cmd/cmd_eraseflash.c (cmd_eraseflash_help), src/cmd/cmd_flashmem.c
|
|
(cmd_flashmem_help), src/cmd/cmd_initbus.c (cmd_initbus_help),
|
|
src/cmd/cmd_help.c (cmd_help_run), src/cmd/cmd_cable.c (cmd_cable_help):
|
|
Use the length to automatically align output correctly. Standardize
|
|
gettext handling of strings here too (only translate descriptions).
|
|
|
|
* configure.ac: Unify duplicated coding statements with AC_DEFUN to simplify
|
|
adding new busses/cables/lowlevel drivers.
|
|
|
|
* include/urjtag/bitmask.h, include/urjtag/fclock.h: Punt UNUSED cruft.
|
|
|
|
* src/bus/avr32.c, src/bus/buses.c, src/bus/buses.h: Rename the avr32 bus
|
|
driver to match the common convention.
|
|
|
|
* src/bus/buses.h, src/bus/buses_list.h, src/bus/buses.c: Unify the list of
|
|
buses in one place.
|
|
|
|
* src/tap/cable.h, src/tap/cable_list.h, src/tap/cable.c: Unify the list of
|
|
cable drivers in one place.
|
|
|
|
* include/urjtag/cable.h, src/cmd/cmd_cable.c, src/tap/cable.c,
|
|
src/tap/cable.h, src/tap/cable/arcom.c, src/tap/cable/byteblaster.c,
|
|
src/tap/cable/dlc5.c, src/tap/cable/ea253.c, src/tap/cable/ei012.c,
|
|
src/tap/cable/ft2232.c, src/tap/cable/generic.h, src/tap/cable/jim.c,
|
|
src/tap/cable/jlink.c, src/tap/cable/keithkoep.c, src/tap/cable/lattice.c,
|
|
src/tap/cable/minimal.c, src/tap/cable/mpcbdm.c, src/tap/cable/triton.c,
|
|
src/tap/cable/ts7800.c, src/tap/cable/usbblaster.c,
|
|
src/tap/cable/vision_ep9307.c, src/tap/cable/wiggler2.c,
|
|
src/tap/cable/wiggler.c, src/tap/cable/xpc.c:
|
|
Constify the cable drivers.
|
|
|
|
* src/tap/cable/generic_usbconn_list.h, src/tap/cable/generic_usbconn.c,
|
|
src/tap/cable/generic_usbconn.h: Unify the list of usb sub cable drivers.
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/ft2232_list.h: Unify the list of
|
|
ftdi usb cable drivers.
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/generic_usbconn.c,
|
|
src/tap/cable/generic_usbconn.h, src/tap/cable/jlink.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/xpc.c: Constify the usb cable
|
|
sub drivers.
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/generic_usbconn.h,
|
|
src/tap/cable/jlink.c, src/tap/cable/usbblaster.c, src/tap/cable/xpc.c,
|
|
src/tap/usbconn/libftdx.h: Create some helper macros for declaring USB
|
|
cable drivers to unify duplicate code and to help with FTDI part decls.
|
|
Avoids defining USB cable drivers when support has been disabled.
|
|
|
|
* src/tap/usbconn.h, src/tap/usbconn.c, src/tap/usbconn_list.h,
|
|
src/tap/usbconn/libftd2xx.c, src/tap/usbconn/libftdi.c,
|
|
src/tap/usbconn/libusb.c: Unify the usb cable drivers.
|
|
|
|
* src/tap/parport.c, src/tap/parport.h, src/tap/parport_list.h,
|
|
src/tap/parport/direct.c, src/tap/parport/ppdev.c, src/tap/parport/ppi.c:
|
|
Unify the list of parallel port cable drivers.
|
|
|
|
* include/urjtag/parport.h, src/tap/parport.c, src/tap/parport/direct.c,
|
|
src/tap/parport.h, src/tap/parport/ppdev.c, src/tap/parport/ppi.c:
|
|
Constify the parallel port cable drivers.
|
|
|
|
* include/urjtag/usbconn.h, src/tap/usbconn.c, src/tap/usbconn.h,
|
|
src/tap/usbconn/libftd2xx.c, src/tap/usbconn/libftdi.c,
|
|
src/tap/usbconn/libusb.c: Constify the USB cable drivers.
|
|
|
|
* include/urjtag/flash.h, src/flash/amd.c, src/flash/amd.h,
|
|
src/flash/amd_flash.c, src/flash/flash.c, src/flash/intel.c,
|
|
src/flash/intel.h: Constify the flash drivers.
|
|
|
|
* include/urjtag/usbconn.h (usbconn_connect, usbconn_free): Punt prototypes
|
|
for funcs that do not exist and lack proper namespace prefix.
|
|
|
|
* src/tap/parport/direct.c, src/tap/parport/ppdev.c, src/tap/parport/ppi.c,
|
|
src/tap/usbconn/libusb.c: Drop redundant #ifdef protection as the Makefile
|
|
already has conditional logic.
|
|
|
|
* src/flash/flash.h: Delete duplicate urj_flash_detectflash prototype.
|
|
|
|
* THANKS: Rutger Hofman was missing.
|
|
|
|
* Makefile.am, src/bus/Makefile.am, src/cmd/Makefile.am,
|
|
src/flash/Makefile.am, src/tap/Makefile.am: Add missing dist files.
|
|
|
|
2010-01-22 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/cmd/cmd_bit.c (cmd_bit_print_params): Fix strncat length handling.
|
|
* src/tap/detect.c (urj_tap_detect_parts): Likewise.
|
|
|
|
* src/tap/cable/jlink.c (jlink_debug_buffer): Unify log lines to avoid
|
|
printf format security warnings.
|
|
|
|
* src/cmd/cmd_shell.c (cmd_shell_run): Log non-zero shell exit status.
|
|
|
|
* src/cmd/cmd_pod.c (cmd_pod_run), src/cmd/cmd_shell.c (cmd_shell_run):
|
|
Fix size_t handling with strlen.
|
|
|
|
* include/urjtag/Makefile.am (pkginclude_HEADERS): Add missing parse.h.
|
|
|
|
* src/flash/flash.c: Check return value of all fread() commands.
|
|
|
|
2010-01-21 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/apps/jtag/jtag.c (main): Don't trigger open file error
|
|
if the last command is "quit".
|
|
|
|
2010-01-20 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* po/POTFILES.in: Remove src/bsdl/bsdl_bison.c, src/bsdl/bsdl_flex.c,
|
|
src/bsdl/vhdl_bison.c and src/bsdl/vhdl_flex.c.
|
|
Add src/bsdl/bsdl_bison.y, src/bsdl/bsdl_flex.l, src/bsdl/vhdl_bison.y
|
|
and src/bsdl/vhdl_flex.l.
|
|
* po/fr.po: Regenerate.
|
|
* po/rw.po: Regenerate.
|
|
* po/sk.po: Regenerate.
|
|
* src/apps/bsdl2jtag/Makefile.am (bsdl2jtag_LDADD): Replace top_srcdir
|
|
with top_builddir.
|
|
* src/apps/jtag/Makefile.am (jtag_LDADD): Likewise.
|
|
* src/bus/ixp465.c: Include <urjtag/part.h>, <urjtag/bus.h>,
|
|
<urjtag/chain.h>, <urjtag/bssignal.h> and <urjtag/jtag.h>
|
|
instead of "part.h", "bus.h", "chain.h", "bssignal.h" and "jtag.h".
|
|
|
|
2010-01-16 Stephane Glondu <steph@glondu.net>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Remove duplicate analog/PARTS
|
|
entry to fix `make install` error with newer GNU coreutils.
|
|
|
|
2010-01-08 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable.c, src/tap/cable/generic_usbconn.c, src/tap/cable/ft2232.c:
|
|
Added support for FT2232H in gnICE+ and ARM-USB-TINY-H cable. Written by
|
|
Michael Hennerich, adapted and submitted by Adam Megacz.
|
|
|
|
* po/fr.po, po/rw.po, po/sk.po: updated
|
|
|
|
2009-12-30 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/jedec.c: [ 2831030 ] added support for flashes AM29LV400BB,
|
|
AM29LV400BT, AM29LV081B (MURANAKA Masaki)
|
|
only flash support added, no redefinitions of macros so far
|
|
|
|
* src/bus/sharc21369_ezkit.c, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/Makefile.am, configure.ac:
|
|
[ 2821604 ] Bus driver for SHARC21369-EZKIT (MURANAKA Masaki)
|
|
|
|
* data/broadcom/bcm4712/bcm4712: added EJTAG registers/instructions
|
|
|
|
2009-12-23 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/cfi.c: also issue CFI_CMD_READ_ARRAY2, required to reset
|
|
some AMD/SCS compliant chips that don't honor CFI_CMD_READ_ARRAY1
|
|
|
|
2009-11-22 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/intel.c, src/flash/amd.c: set max_bytes_write to std value 1
|
|
instead of 0
|
|
|
|
2009-11-17 Rutger Hofman <rfhh>
|
|
|
|
* src/bus/writemem.c: big-endian write shifts one too much. Patch by
|
|
Snowel Xue
|
|
|
|
2009-11-10 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf.c: use urj_tap_chain_defer_clock() for state traversals
|
|
and RUNTEST. Improves buffering performance for heterogenous SVFs.
|
|
|
|
2009-11-03 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac: Use pkg-config for libusb/libftdi by default.
|
|
|
|
* configure.ac: Create a helper macro for user summary display.
|
|
|
|
* configure.ac: Fix handling of inpout32 variables.
|
|
|
|
* src/tap/parport/direct.c: Fix build failure in inpout32 code due to
|
|
urjtag library overhaul.
|
|
|
|
2009-10-28 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf.h, src/svf/svf_bison.y, src/svf/svf_flex.l:
|
|
rework HEXA_NUM scanning strategy to avoid excessive token lengths
|
|
|
|
2009-10-27 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: default vid/pid for Signalyzer (Adam Megacz)
|
|
|
|
2009-10-11 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* MAINTAINERS: Add maintainer info for ADI parts. Drop the old P:/M: format
|
|
(split name/e-mail lines) for the new combined M: format.
|
|
|
|
2009-08-13 Arnim Laeuger <arniml>
|
|
|
|
* data/xilinx/xcf04s/STEPPINGS, data/xilinx/xc3s500e_fg320/STEPPINGS:
|
|
[ 2836180 ] Patch for new steppings of xcf04s and xc3s500e (Steven Walter)
|
|
|
|
2009-08-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/ixp465.c, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/Makefile.am, configure.ac, data/Makefile.am,
|
|
data/intel/ixp465/ixp465, data/intel/ixp465/STEPPINGS, data/intel/PARTS:
|
|
[ 2821545 ] IXP465 support (TedM)
|
|
|
|
* src/global/parse.c: [ 2822900 ] more characters in each lines.
|
|
(MURANAKA Masaki)
|
|
|
|
2009-08-10 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* sysdep.h: Handle more versions of mingw.
|
|
|
|
2009-08-10 Arnim Laeuger <arniml>
|
|
|
|
* data/Makefile.am, sharc21369/STEPPINGS, sharc21369/sharc21369:
|
|
[ 2816814 ] ADSP-21369 support. (MURANAKA Masaki)
|
|
|
|
2009-07-15 Arnim Laeuger <arniml>
|
|
|
|
* data/marvell/88w8500/88w8500-ban, data/marvell/88w8500/STEPPINGS,
|
|
data/marvell/PARTS, data/Makefile.am:
|
|
[ 2820439 ] Add Marvell 88w8500 support (Jochen Friedrich)
|
|
|
|
* src/bus/arm9tdmi.c, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/Makefile.am, configure.ac, po/POTFILES.in:
|
|
[ 2820437 ] ARM9 bus support (Jochen Friedrich)
|
|
|
|
* data/broadcom/bcm4702/STEPPINGS, data/broadcom/bcm4702/bcm4702,
|
|
data/broadcom/PARTS, data/Makefile.am:
|
|
[ 2815741 ] Add bcm4702 definitions (Jochen Friedrich)
|
|
|
|
* src/bus/readmem.c: [ 2815739 ] Fix fwrite call (Jochen Friedrich)
|
|
|
|
* src/bus/ejtag_dma.c: [ 2815726 ] Fix HALFWORD and BYTE DMA read access
|
|
(Jochen Friedrich)
|
|
|
|
* src/flash/amd_flash.c: [ 2821629 ] Can't find flash_info : amd_flash.c
|
|
(MURANAKA Masaki)
|
|
* src/flash/amd_flash.c: [ 2821646 ] Possible buffer overrun in amd_detect
|
|
(MURANAKA Masaki)
|
|
|
|
* src/flash/flash.c, include/urjtag/flash.h:
|
|
[ 2816643 ] Matching arguments of funcion flasherase()
|
|
|
|
* configure.ac, Makefile.am: first issue of
|
|
[ 2807343 ] urjtag dependencies missing autoconf checks
|
|
disabled SVF or disabled BSDL prevents potfile creation
|
|
when generated flex/bison files are missing
|
|
|
|
2009-07-15 Arnim <arniml>
|
|
|
|
* src/flash/amd.c: [ 2806917 ] Atmel AT49BV322D flash support (MURANAKA Masaki)
|
|
Work around flash chips that support multi byte write mode with a
|
|
different programming algorithm.
|
|
|
|
2009-07-10 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: disable "Set Data bits LowByte" for
|
|
ft2232_transfer, seems to be superfluous and decreases cable performance
|
|
(Jie Zhang)
|
|
|
|
2009-06-15 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/mpc824x.c: experimental support for x16 mode, including help
|
|
|
|
2009-06-13 Rutger Hofman <rfhh>
|
|
|
|
* include/urjtag/*.h: change all struct/enum definitions from
|
|
typedef struct urj_bla urj_bla_t into typedef struct URJ_BLA urj_bla_t
|
|
because swig otherwise generates name collisions
|
|
* Makefile.am, urjtag.i: add the dumbest possible swig target that generates
|
|
swig for everything referenced include/urjtag/urjtag.h. This might even
|
|
turn out to be useful once the API has been cleaned up.
|
|
|
|
2009-06-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/bf533_stamp.c: [ 2804509 ] bf533_stamp bus driver enchancement
|
|
(MURANAKA Masaki)
|
|
|
|
2009-06-05 Rutger Hofman <rfhh>
|
|
|
|
* src/tap/cable.c: sanity check on driver device type at connect time
|
|
* have only /* style comments in the public includes, since that allows
|
|
a client app to compile with -ansi
|
|
|
|
2009-06-08 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable.c, src/tap/cable/minimal.c, src/tap/Makefile.am:
|
|
[ 2798198 ] The Minimal Parallel Port JTAG Cable (Yen Rui)
|
|
|
|
* data/MANUFACTURERS: commented manufacturer ARM
|
|
[ 2778313 ] Failed to detect ARM cores.
|
|
|
|
* MAINTAINERS: new
|
|
|
|
2009-06-05 Rutger Hofman <rfhh>
|
|
|
|
* src/tap/cable/ts7800.c, src/tap/cable/vision_ep9307.c: make them compile
|
|
again
|
|
|
|
2009-06-04 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_flex.l: force Base = DECIMAL for BOUNDARY_LENGTH attribute
|
|
|
|
2009-06-04 Rutger Hofman <rfhh>
|
|
|
|
* src/tap/cable/*.c, src/tap/parport/*.c, src/tap/usbconn/*.c: return/handle
|
|
URJ_STATUS_OK/FAIL more correctly
|
|
|
|
2009-06-02 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/cmd_initbus.c: use separate index variable for driver selection
|
|
|
|
2009-06-01 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_sem.c, THANKS: Fix bsdl bit order and safe bit
|
|
(Jean-Christian de Rivaz)
|
|
|
|
2009-06-01 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/bsdl/bsdl_sem.c: add missing "length" in display (Jean-Christian de
|
|
Rivaz)
|
|
|
|
2009-05-28 Rutger Hofman <rfhh>
|
|
|
|
* include/urjtag/cmd.h, src/cmd/cmd.h: move defitions from public to private
|
|
include file because these parameter utilities are no longer used outside
|
|
cmd
|
|
|
|
* include/urjtag/usbconn/*.h: move to src/tap/usbconn/ because these are
|
|
actually internal include files
|
|
|
|
2009-05-28 Rutger Hofman <rfhh>
|
|
|
|
* src/global/urjtag.c, src/global/Makefile.am: rename urjtag.c to
|
|
src/global/log-error.c
|
|
|
|
* src/global/params.c, src/global/Makefile.am, include/urjtag/params.h,
|
|
include/urjtag/Makefile.am: data structure for key/value pairs
|
|
|
|
* src/bus/*, include/urjtag/bus_driver.h, include/urjtag/bus.h,
|
|
src/cmd/cmd_initbus.c: have an API call initbus() that uses key/value
|
|
pairs to pass in options
|
|
|
|
* src/tap/cable.c, src/tap/parport.c, src/tap/usbconn.c, src/tap/cable/*,
|
|
src/tap/parport/*, src/tap/usbconn/*, include/urjtag/cable.h: have API
|
|
calls urj_tap_cable_parport_connect(), urj_tap_cable_usb_connect(),
|
|
urj_tap_cable_other_connect(); have a tagged union in the cable driver
|
|
that offers driver-specific connect() calls.
|
|
|
|
* src/cmd/cmd_cable.c, src/tap/cable/wiggler.c: the 4th wiggler argument,
|
|
the pin bitmap, is now a key/value parameter with key 'bitmap='.
|
|
|
|
2009-05-28 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac: improve svn rev look up by ignoring errors, unifying
|
|
duplicated code, and support git-svn tree
|
|
|
|
* src/tap/detect.c: if the part could not be found because the data file
|
|
could not be opened, then log an obvious error message
|
|
|
|
* src/cmd/cmd_debug.c: display current log level if no arguments specified
|
|
|
|
2009-05-24 Rutger Hofman <rfhh>
|
|
|
|
* src/bus/avr32.c: fix uninitialized warning (Florian Fainelli)
|
|
|
|
2009-05-26 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/cable/xpc.c: fix crash when USB device is busy (Florian Fainelli)
|
|
|
|
2009-05-26 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/bf561_ezkit.c, src/bus/sharc21065l.c, src/bus/bf537_stamp.c,
|
|
src/bus/bf533_ezkit.c, src/bus/bf533_stamp.c, src/bus/ppc405ep.c,
|
|
src/bus/bf548_ezkit.c: keywords
|
|
|
|
* src/bus/bf533_stamp.c: manual fix of [ 2793104 ]
|
|
|
|
2009-05-25 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/bf533_stamp.c: [ 2793104 ] hidden bug? in bf533-stamp.c
|
|
(MURANAKA Masaki)
|
|
|
|
2009-05-24 Rutger Hofman <rfhh>
|
|
|
|
* src/bus/readmem.c, src/bus/writemem.c, include/urjtag/bus.h,
|
|
src/cmd/cmd_readmem.c, src/cmd/cmd_writemem.c: readmem() and
|
|
writemem() now return an error condition. Patch up error handling
|
|
in readmem() and writemem().
|
|
|
|
2009-05-23 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_msg.h, src/bsdl/vhdl_flex.l, src/bsdl/vhdl_bison.y,
|
|
src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y:
|
|
change some errors to fatals
|
|
|
|
* include/urjtag/error.h, src/global/urjtag.c,
|
|
src/apps/bsdl2jtag/bsdl2jtag.c,
|
|
src/bsdl/bsdl_msg.h, src/bsdl/bsdl.c, src/bsdl/bsdl_sem.c,
|
|
src/bsdl/vhdl_flex.l, src/bsdl/vhdl_bison.y,
|
|
src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y: port BSDL message system to
|
|
urj_log/urj_err_set functionality
|
|
|
|
2009-05-23 Rutger Hofman <rfhh>
|
|
|
|
* configure.ac, Makefile.am: add an option (--disable-apps) to build only
|
|
the library, not the application main programs
|
|
|
|
2009-05-23 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl2jtag, configure.ac, Makefile.am, src/Makefile.am,
|
|
src/apps/bsdl2jtag/Makefile.am, src/apps/bsdl2jtag/bsdl2jtag.c:
|
|
replace wrapper shell script with application that links to liburjtag
|
|
|
|
2009-05-22 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_sem.c: replace remaining printf invocations with urj_log
|
|
|
|
* src/flash/flash.c: verify speed-up: use URJ_BUS_READ_START, _NEXT,
|
|
and _END instead of monolithic URJ_BUS_READ
|
|
|
|
* src/flash/jedec.c: rework autoselect probing, better support of
|
|
x8/x16 capable flash chips
|
|
|
|
* src/bsdl/bsdl.c, src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c,
|
|
src/bsdl/bsdl_flex.l, src/bsdl/bsdl_types.h: use URJ_STATUS_ return
|
|
codes except on toplevel interface, this needs to be revisited
|
|
|
|
2009-05-21 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/xilinx/PARTS: added xc3s1200e_fg320 and xc2vp30-ffg896 (Florian
|
|
Fainelli)
|
|
|
|
* configure.ac: enable -Werror by default only when building out of an scm,
|
|
and add an explicit --enable-werror option to control it
|
|
|
|
* src/tap/detect.c: if the idcode failed to parse, don't print it out like it
|
|
actually worked but only returned zero's as this is confusing -- be clear
|
|
in that we didn't even attempt to read the idcode
|
|
|
|
* src/cmd/cmd_idcode.c: update usage to reflect reality
|
|
|
|
* include/urjtag/tap_register.h, src/tap/detect.c, src/tap/register.c:
|
|
convert the local bits_to_uint64() to a proper urj_tap_register_get_value()
|
|
so everyone can use it
|
|
|
|
* src/tap/idcode.c: decode the bit stream into hex values so people don't
|
|
have to do this manually
|
|
|
|
2009-05-19 Arnim Laeuger <arniml>
|
|
|
|
* data/Makefile.am, data/broadcom/bcm6348/bcm6348,
|
|
data/broadcom/bcm6348/STEPPINGS, data/broadcom/bcm6358/bcm6358,
|
|
data/broadcom/PARTS: added bcm6348 (Julien Aube)
|
|
|
|
2009-05-19 Rutger Hofman <rfhh>
|
|
|
|
* include/urjtag/error.h: make urj_log into a macro. Principal reason: if
|
|
urj_log won't print, it also won't evaluate the arguments so there is no
|
|
performance penalty in having gazillion disabled low-level prints
|
|
* src/bus/*, include/urjtag/bus_driver.h: refactor src/bus to use urj_log
|
|
i.s.o. printf, set urj_error wherever appropriate, return FAIL/OK state
|
|
where appropriate. read_start() now returns status.
|
|
|
|
2009-05-18 Rutger Hofman <rfhh>
|
|
|
|
* src/cmd/cmd_debug.c, include/urjtag/jtag.h, src/global/urjtag.c: change
|
|
to set log level; remove unused global variable urj_debug_mode
|
|
|
|
2009-05-18 Rutger Hofman <rfhh>
|
|
|
|
Make it compile for my eCos BlackFin checkout.
|
|
- numerous casts because "%zd" ever requires a size_t, even for a manifest
|
|
constant; and because a uint32_t should be cast to a long unsigned to be
|
|
printed with "%lu" (long unsigned is at least 32-bit)
|
|
* include/urjtag/urjtag.h, include/urjtag/urjtag.h.in: rename to only
|
|
export .h files for modules actually configured: USB, SVF, BSDL are
|
|
only conditionally exported
|
|
|
|
2009-05-18 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/amd.c: added Winbond W19B320AT/B flash chip
|
|
|
|
2009-05-16 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/ixp435.c, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/Makefile.am, configure.ac, THANKS:
|
|
[ 2770421 ] Patch: Support for IXP43x (Florian Boor)
|
|
without jtag description files
|
|
|
|
* include/urjtag/parport.h, src/tap/parport/ppdev.c, src/tap/parport/ppi.c,
|
|
src/tap/parport/direct.c, src/tap/parport.c: [ 2782584 ] PPWDATA and PPWCONTROL
|
|
ioclts take unsigned char not uint8_t (Yen Rui)
|
|
|
|
2009-05-14 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf_bison.y, src/svf/svf.c, src/cmd/cmd_svf.c,
|
|
include/urjtag/svf.h:
|
|
implement pass/fail return values with URJ_STATUS_*
|
|
|
|
2009-05-14 Rutger Hofman <rfhh>
|
|
|
|
* src/tap/cable/*.c: convert return values, error handling, printfs
|
|
* src/**: globally remove \n or !\n from error detail msgs; sanitize
|
|
error prints a tiny bit
|
|
* include/urjtag/sysdep.h, include/urjtag/Makefile.am: sysdep.h should most
|
|
certainly not be in the directory of exported header files. Move it back
|
|
to the root dir in expectation of an include dir that is private to the
|
|
src tree
|
|
|
|
2009-05-12 Rutger Hofman <rfhh>
|
|
|
|
* src/cmd/*.c, many more files: have the commands in src/cmd/ return
|
|
URJ_STATUS_OK on success, URJ_STATUS_FAIL on error, URJ_STATUS_MUST_QUIT
|
|
at a 'quit' command. The command implementations themselves do not print
|
|
on error; that is left to the caller, i.e. the application or a file
|
|
parser.
|
|
Library commands that produce output (print routines) are equipped with
|
|
a urj_log_level_t parameter to control their verbosity.
|
|
* include/urjtag/error.h, many more files: introduce error values
|
|
URJ_ERROR_FTD, URJ_ERROR_USB. Handle URJ_ERROR_IO specially through macro
|
|
urj_error_IO_set that handles errno/strerror().
|
|
|
|
2009-05-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/ejtag_dma.c (ejtag_dma_bus_init): invert abort condition for break
|
|
timeout
|
|
|
|
2009-05-10 Arnim Laeuger <arniml>
|
|
|
|
* doc/UrJTAG.txt: hint for non-standard flash commands
|
|
|
|
2009-05-09 Rutger Hofman <rfhh>
|
|
|
|
* configure.ac, **/Makefile.am: Add automake magic to have -Werror except
|
|
in the flex-generated files. See the automake FAQ:
|
|
http://www.gnu.org/software/automake/manual/html_node/Flag-Variables-Ordering.html#Flag-Variables-Ordering
|
|
Only setting -Wno-error=unused-function doesn't work for some gcc-s.
|
|
|
|
2009-05-09 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/Makefile.am, src/svf/Makefile.am: avoid -Werror to bail out because
|
|
of unused input() functions in flex-generated files
|
|
|
|
* include/urjtag/svf.h, src/cmd/cmd_svf.c, src/svf/svf.c,
|
|
src/svf/svf_bison.y, src/svf/svf.h, src/svf/svf_flex.l:
|
|
replace print_progress with DETAIL log level
|
|
|
|
2009-05-07 Rutger Hofman <rfhh>
|
|
|
|
* src/flash/, src/svf/, src/tap/*.c, src/tap/parallel/, src/tap/usbconn:
|
|
replace calls to printf() with calls to urj_log() and urj_error_set()
|
|
|
|
2009-05-07 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/wiggler2.c: [ 2782581 ] TRST, TMS and TDI incorrectly marked
|
|
in wiggler2 cable
|
|
|
|
* po/POTFILES.in: src/jim/tap.c renamed to jim_tap.c, removed getdelim.c
|
|
and getline.c
|
|
|
|
* src/cmd/cmd_test.c: [ 2776954 ] typo? on 'help test'
|
|
|
|
2009-05-06 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/amd.c: fix typo in S29GLxxxN, twice
|
|
|
|
2009-05-05 Rutger Hofman <rfhh>
|
|
|
|
* src/svf/svf.c, src/svf/svf_bison.y, src/svf/svf_flex.y: replace calls to
|
|
printf() with calls to urj_log() and urj_error_set()
|
|
|
|
* src/lib/getline.c, src/lib/getdelim.c: remove because unused
|
|
|
|
* src/global/parse.c: replace calls to printf() with calls to urj_log() and
|
|
urj_error_set()
|
|
|
|
* include/urjtag/jim.h, include/urjtag/jim/some_cpu.h, src/jim/tap.c,
|
|
src/jim/jim_tap.c, src/jim/some_cpu.c, src/jim/intel_28f800b3.c: replace
|
|
calls to printf() with calls to urj_log() and urj_error_set()
|
|
|
|
* include/urjtag/part.h, src/cmd/cmd_bus.c, src/cmd/cmd_detect.c,
|
|
src/cmd/cmd_signal.c, src/bsdl/bsdl_bison.y, src/part/instruction.c,
|
|
src/part/bsbit.c, src/part/part.c, src/part/signal.c: start replacing
|
|
calls to printf() with calls to urj_log(), for starters with src/part.
|
|
Sometimes that means fixing a function to return an error status where
|
|
it previously printed and returned void
|
|
|
|
* include/urjtag/data_register.h, include/urjtag/error.h,
|
|
include/urjtag/log.h, src/global/*.c, src/cmd/cmd_register.c,
|
|
src/cmd/cmd_instruction.c, src/bsdl/bsdl_sem.c, src/tap/detect.c,
|
|
src/part/data_register.c, src/svf/svf_flex.l, src/svf/svf.c,
|
|
src/flash/detectflash.c: transform a number of urj_cmd_run() calls into
|
|
API calls
|
|
|
|
2009-05-04 Rutger Hofman <rfhh>
|
|
|
|
* src/cmd/cmd_bus.c, src/bus/buses.c, include/urjtag/bus.h: transform the
|
|
bus cmd implementation into an API call
|
|
* src/cmd/cmd_detect.c, src/tap/detect.c, include/urjtag/tap.h: transform the
|
|
detect cmd implementation into an API call
|
|
|
|
2009-05-02 Rutger Hofman <rfhh>
|
|
|
|
Refactor the autoconf stuff a bit so make install actually creates
|
|
include/urjtag/*.h
|
|
|
|
2009-05-01 Rutger Hofman <rfhh>
|
|
|
|
Global variables for liburjtag should not reside in the shell app
|
|
* src/jtag.c: split into src/global/urjtag.c and src/apps/jtag/jtag.c
|
|
|
|
2009-05-01 Rutger Hofman <rfhh>
|
|
|
|
Move all include/* to include/urjtag/* to lower collision chance on #include.
|
|
Start lifting commands from cmd/ into the library modules. Begun work on:
|
|
* src/cmd/cmd_bit.c
|
|
* src/cmd/cmd_instruction.c
|
|
* src/cmd/cmd_signal.c
|
|
|
|
2009-04-24 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/analog/bf518/bf518: Update with public BSDL file.
|
|
|
|
* data/analog/bf527/bf527, data/analog/bf533/bf533, data/analog/bf537/bf537,
|
|
data/analog/bf538/bf538, data/analog/bf548/bf548, data/analog/bf561/bf561:
|
|
Add more register/instruction JTAG encodings.
|
|
|
|
2009-04-23 Rutger Hofman <rfhh>
|
|
|
|
Use the changes by Przemyslaw Iskra, published as
|
|
$ svn co http://labserver.uv.es/svn_FPGA/trunk/source/urjtag urjtag-lib
|
|
to use libtool from now on. He based on r1427.
|
|
* configure.ac, **/Makefile.am: use libtool to create one shared liburjtag.la
|
|
|
|
2009-04-23 Rutger Hofman <rfhh>
|
|
|
|
Expand tabs also in #defines -- indent skips them.
|
|
Run indent again. Since many identifiers have changed, line wraps have to
|
|
be redone.
|
|
Public typedefs of enums follow the same naming scheme as structs:
|
|
typedef enum urj_bla { ... } urj_bla_t;
|
|
* affects the complete code base.
|
|
|
|
2009-04-23 Rutger Hofman <rfhh>
|
|
|
|
Mechanically replace all global function/variable names w/ a prefix
|
|
urj_(<module>_)*. Investigated with
|
|
ctags -R -x --c-kinds=f --file-scope=no | grep function
|
|
ctags -R -x --c-kinds=v --file-scope=no | grep variable
|
|
ctags -R -x --c-kinds=t --file-scope=no | grep typedef
|
|
ctags -R -x --c-kinds=e --file-scope=no | grep enum
|
|
then (sed-wise or manually) repair what doesn't fit automatically:
|
|
- imported files from src/lib
|
|
- duplicate modules like urj_cmd_cmd_detect that becomes urj_cmd_detect
|
|
- stuff where prefix escalation has a mismatch w/ existing name escalation
|
|
because of different order:
|
|
usbconn_cable_usbblaster_ftdi
|
|
becomes
|
|
urj_tap_cable_usbconn_usbblaster_ftdi
|
|
not
|
|
urj_tap_cable_usbconn_cable_usbblaster_ftdi
|
|
- typedefs only (or mostly) under include. Typedefs under src/ are left
|
|
unmodified, since they will be invisible outside liburjtag.
|
|
and then some.
|
|
The identifier names in .y and .l files have been changed by hand.
|
|
Some type names happen to be identical to variable/parameter names. These
|
|
were changed too by the automatic replace. Undo a number of them by hand.
|
|
* affects the complete code base.
|
|
|
|
2009-04-22 Rutger Hofman <rfhh>
|
|
|
|
A very few typedef'ed types do NOT have an _t prefix. Orthogonize this by
|
|
adding _t to typedefs: instruction, data_register, tap_register.
|
|
* include/part.h, include/data_register.h, include/instruction.h,
|
|
include/register.h, include/tap.h, src/cmd/instruction.c,
|
|
src/cmd/register.c, src/cmd/dr.c, src/cmd/bit.c, src/cmd/scan.c,
|
|
src/cmd/print.c, src/tap/discovery.c, src/tap/detect.c, src/tap/register.c,
|
|
src/tap/tap.c, src/tap/idcode.c, src/part/instruction.c, src/part/part.c,
|
|
src/part/data_register.c, src/bus/fjmem.c, src/bus/ejtag_dma.c,
|
|
src/bus/avr32.c, src/bus/ejtag.c, src/svf/svf.c, src/svf/svf.h
|
|
|
|
2009-04-22 Rutger Hofman <rfhh>
|
|
|
|
Check suspicious-looking public symbols whether they shouldn't be in fact
|
|
static:
|
|
* src/jim/tap.c: make some variables static
|
|
* src/jim/intel_28f800b3.c: make some variables static
|
|
* src/jim/some_cpu.c
|
|
* src/tap/parport/direct.c
|
|
* src/bus/ejtag_dma.c
|
|
* src/bus/mpc824x.c
|
|
* src/bus/bcm1250.c
|
|
* src/bus/slsup3.c
|
|
* src/flash/amd_flash.c
|
|
|
|
2009-04-21 Rutger Hofman <rfhh>
|
|
|
|
Run indent over the code base: all '*.[ch]' files except evidently imported
|
|
ones, like the libiberty imports in lib.
|
|
* xargs indent -npro -nut -bli0 -i4 {-T typedef}* < indent-files
|
|
where indent-files is `find . -name '*.[ch]' -print` except:
|
|
src/lib/ansidecl.h
|
|
src/lib/filenames.h
|
|
src/lib/lbasename.c
|
|
src/lib/libiberty.h
|
|
src/lib/lrealpath.c
|
|
src/lib/make-relative-prefix.c
|
|
src/lib/safe-ctype.c
|
|
src/lib/safe-ctype.h
|
|
include/gettext.h
|
|
* README: add a warning as to the status of the urjtag/ branch AKA the
|
|
Librarification branch
|
|
|
|
2009-04-17 Kolja Waschk <kawk>
|
|
|
|
* Makefile.am: Distribute UrJTAG.nsi in source tarball next time
|
|
|
|
2009-04-17 Arnim Laeuger <arniml>
|
|
|
|
Version 0.10 released.
|
|
|
|
2009-04-17 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac, NEWS: set release version 0.10
|
|
|
|
* src/jtag.c: Update copyright year at both instances
|
|
|
|
2009-04-17 Kolja Waschk <kawk>
|
|
|
|
* configure.ac: Last minute fix for USBCFLAGS for libusb
|
|
* doc/UrJTAG.txt: Info about installing precompiled version on Win
|
|
* src/flash/jedec.c: Add license info
|
|
* UrJTAG.nsi: Create links to EXE and UrJTAG.txt in Start Menu
|
|
|
|
2009-04-16 Arnim Laeuger <arniml>
|
|
|
|
* THANKS: added contributors
|
|
|
|
2009-04-16 Kolja Waschk <kawk>
|
|
|
|
* include/xpcu.h, src/flash/jedec_exp.c: Add license info
|
|
* doc/UrJTAG.txt: Info about source for 64bit/Vista inpout32.dll
|
|
* UrJTAG.nsi: Include inpout32.dll (needs some manual work)
|
|
|
|
2009-04-16 Arnim <arniml>
|
|
|
|
* doc/UrJTAG.txt: Documentation fixes (Uwe Hermann)
|
|
|
|
2009-04-13 Arnim <arniml>
|
|
|
|
* configure.ac: follow version info in NEWS
|
|
|
|
2009-04-12 Arnim <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: flyswatter description update
|
|
|
|
* NEWS: prepare for 0.10 release, still requires version update
|
|
|
|
2009-04-10 Arnim Laeuger <arniml>
|
|
|
|
* src/flash/flash.c (flasherase): fix missing base address for block_no calculation,
|
|
re-use find_block() from flashmem() to align block_no calculation
|
|
|
|
2009-04-08 Arnim Laeuger <arniml>
|
|
|
|
* couple of files: enable Id keyword substitution
|
|
|
|
* po/fr.po, po/rw.po, po/sk.po: update to latest status
|
|
|
|
* src/bus/bscoach.c: use english text per default
|
|
|
|
* po/POTFILES.in: update to current file list
|
|
|
|
* data/Makefile.am: added missing files for install
|
|
|
|
* doc/UrJTAG.txt: describe bus command
|
|
|
|
* doc/bsdl2jtag.1, doc/jtag.1, THANKS: Various manpage updates (Uwe Hermann)
|
|
|
|
2009-04-06 Arnim Laeuger <arniml>
|
|
|
|
* src/Makefile.am, po/POTFILES.in: fix two build issues (Uwe Hermann)
|
|
|
|
* src/tap/usbconn/libftdi.c: Better errors from ftdi (Jon Smirl)
|
|
|
|
* src/flash/jedec.c: Author added.
|
|
|
|
2009-04-05 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac: turn feature options that are enabled by default into
|
|
--disable-*
|
|
|
|
* src/tap/cable/ft2232.c: check target status for UsbScarab2 (Tomek Cedro)
|
|
|
|
2009-04-04 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable.c, src/tap/cable/generic_usbconn.c,
|
|
THANKS, doc/UrJTAG.txt: usbscarab2 cable driver added (Tomek Cedro)
|
|
|
|
2009-03-30 Arnim Laeuger <arniml>
|
|
|
|
* doc/UrJTAG.txt: multi-byte description
|
|
|
|
* configure.ac: better description for flash-multi-byte
|
|
|
|
2009-03-29 Arnim Laeuger <arniml>
|
|
|
|
* UrJTAG.txt: Update supported pod and device lists
|
|
|
|
2009-03-28 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/chain.c (chain_set_pod_signal) : keep old value of trst in
|
|
case trst isn't modified by mask/val
|
|
|
|
* src/tap/chain.c: [ 2610857 ] chain_set_pod_signal() looks funky
|
|
|
|
* UrJTAG.txt: typo
|
|
|
|
2009-03-28 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl2jtag, src/Makefile.am, doc/UrJTAG.txt: implement bsdl2jtag
|
|
as a wrapper script that calls jtag shell with 'bsdl dump ...'
|
|
|
|
* src/Makefile.am, src/bsdl2jtag.c: removed bsdl2jtag
|
|
|
|
2009-03-27 Arnim Laeuger <arniml>
|
|
|
|
* src/jtag.c: more than one optional file can be specified
|
|
|
|
* src/flash/jedec.c: fix memory corruption from jedec code (Jon Smirl)
|
|
|
|
2009-03-26 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/initbus.c: Notify which bus is active when a new bus is initialized
|
|
(Jon Smirl)
|
|
|
|
* src/bus/mpc5200.c, THANKS: Support the MUX parameter on the mpc5200
|
|
local bus for hardware (Jon Smirl)
|
|
|
|
2009-03-23 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/pod.c: show signal names for TRST and RESET
|
|
|
|
2009-03-18 Arnim Laeuger <arniml>
|
|
|
|
* acinclude.m4: add libtinfo, fix for
|
|
[ 2691154 ] Configure fails to detect libtinfo
|
|
|
|
* src/flash/intel.c, src/flash/amd.c: activate multi byte write mode
|
|
for > 1, not > 0
|
|
[ 2690857 ] Can't write flashes
|
|
|
|
2009-03-12 Arnim Laeuger <arniml>
|
|
|
|
* data/atheros/ar2312/ar2312: AR2313 flash access patch
|
|
(snowweihua)
|
|
|
|
2009-03-08 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf.c, src/svf/svf_bison.y, src/svf/svf.h:
|
|
[ 2666261 ] Add pass/fail report to SVF player
|
|
|
|
* src/svf/svf.c: avoid double free for SIR/SDR parameter strings in case
|
|
of a consistency check error
|
|
|
|
* src/bsdl/bsdl_sem.c: avoid leading space when printing commands
|
|
|
|
2009-03-07 Arnim Laeuger <arniml>
|
|
|
|
* data/ti/tnetv1060/tnetv1060, data/ti/tnetv1061/tnetv1061:
|
|
init EJTAG bus automatically
|
|
|
|
2009-03-05 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/print_queue.c, src/bus/bscoach.c, src/bus/ejtag_dma.c,
|
|
src/bus/pxa2x0.c, src/bus/zefant-xs3.c, src/bus/jopcyc.c,
|
|
src/bus/s3c4510x.c, src/bus/ejtag.c: skip operations of *_bus_init()
|
|
if TAP is not in RUNTEST/IDLE state
|
|
[ 2658604 ] Errors when part description contains commands accessing TAP
|
|
|
|
2009-03-04 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/mpc5200.c: add additional address decoding to mpc5200 bus driver
|
|
(Jeff Wittrock)
|
|
|
|
2009-03-02 Arnim Laeuger <arniml>
|
|
|
|
* data/freescale/PARTS: add stepping for MPC5200B (Jeff Wittrock)
|
|
|
|
2009-03-01 Arnim Laeuger <arniml>
|
|
|
|
* data/ti/PARTS, data/ti/tnetv1060/tnetv1060, data/ti/tnetv1060/STEPPINGS,
|
|
data/Makefile.am:
|
|
TI tnetv1060 (Kenny)
|
|
|
|
2009-02-27 Arnim Laeuger <arniml>
|
|
|
|
* doc/UrJTAG.txt: Warning about FTD2XX driver, USB FAQ.
|
|
|
|
* src/cmd/flashmem.c, src/flash/flash.c, include/flash.h:
|
|
[ 2645787 ] Bypass verify stage of flashmem cmd (Jeff Wittrock)
|
|
|
|
2009-02-26 Arnim Laeuger <arniml>
|
|
|
|
* data/Makefile.am, data/MANUFACTURERS, data/ti/PARTS,
|
|
data/ti/tnetv1061/STEPPINGS, data/ti/tnetv1061/tnetv1061:
|
|
TI tnetv1061 (Kenny)
|
|
|
|
* src/svf/svf_flex.l:
|
|
[ 2638083 ] SVF progress indicator not visible for some .svf files
|
|
(William)
|
|
|
|
2009-02-25 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf_flex.l: [ 2635979 ] Replace index() to strchr()
|
|
(MURANAKA Masaki)
|
|
|
|
2009-02-23 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c:
|
|
keep JTAG dongle in current mode (Holger Schurig)
|
|
|
|
* data/atmel/at32ap7000/at32ap7000: clarifications for AVR32 data
|
|
(Holger Schurig)
|
|
|
|
2009-02-17 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/bus/mpc824x.c (setup_address): Return on unhandled sizes to avoid
|
|
compiler warnings.
|
|
|
|
* src/bsdl2jtag.c, src/bus/mpc824x.c, src/cmd/include.c, src/cmd/scan.c,
|
|
src/cmd/shell.c, src/jim/intel_28f800b3.c, src/jim/some_cpu.c,
|
|
src/jim/tap.c, src/part/data_register.c, src/tap/cable.c,
|
|
src/tap/cable/generic.c, src/tap/cable/jim.c, src/tap/cable/jlink.c,
|
|
src/tap/cable/xpc.c, src/tap/usbconn/libusb.c: Remove spurious semicolons
|
|
from places they do not belong (like at the end of braces).
|
|
|
|
2009-02-16 Arnim Laeuger <arniml>
|
|
|
|
* doc/UrJTAG.txt: some FAQs
|
|
|
|
2009-02-13 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* include/chain.h, include/tap.h, src/tap/chain.c, src/tap/tap.c: Add a
|
|
prefix to all local variables named "exit" to avoid shadowing the system
|
|
exit() function.
|
|
|
|
* src/cmd/print.c (cmd_print_run): Use puts() to display the formatted buffer
|
|
rather than printf() to avoid security issues with dynamically generated
|
|
format strings, and to avoid warnings generated by such compilers:
|
|
print.c:111: warning: format not a string literal and no format arguments
|
|
|
|
* configure.ac: Put our local -I paths into CPPFLAGS before anything coming
|
|
from the user as we want to make sure our local paths take precedence.
|
|
Reported by Steve Franks from a FreeBSD report.
|
|
|
|
2009-02-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_sem.c: return proper error code to upper level
|
|
|
|
2009-02-07 Arnim Laeuger <arniml>
|
|
|
|
* doc/UrJTAG.txt: turn http links into real hyperlinks
|
|
|
|
* doc/UrJTAG.txt: libftdi URL changed
|
|
|
|
2009-02-06 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: fix nSRST for flyswatter (Kees Jongenburger)
|
|
|
|
2009-01-26 Kolja Waschk <kawk>
|
|
|
|
* UrJTAG.nsi: Script to create Windows installer using NSIS.
|
|
|
|
2009-01-22 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/cmd/include.c: Include ctype.h for isalpha().
|
|
|
|
* src/bsdl/bsdl_sem.c (create_register): Use %zu for size_t with printf().
|
|
|
|
* src/tap/detect.c (detect_parts): Use the PRIX64 format string for 64bit
|
|
types with printf().
|
|
|
|
* src/part/part.c (part_print): Use const markings with const strings.
|
|
* src/cmd/include.c (cmd_include_or_script_run): Likewise.
|
|
|
|
* sysdep.h: Redirect swprintf() calls to _snwprintf() for Windows as they
|
|
implemented a different function from ISO C (theirs does not take a count).
|
|
|
|
2009-01-19 Kolja Waschk <kawk>
|
|
|
|
* doc/UrJTAG.txt,
|
|
include/cable.h, include/chain.h, include/pod.h, include/Makefile.am,
|
|
src/cmd/cmd.c, src/cmd/pod.c, src/cmd/Makefile.am, src/tap/cable.c,
|
|
src/tap/chain.c, src/tap/cable/wiggler.c, src/tap/cable/arcom.c,
|
|
src/tap/cable/mpcbdm.c, src/tap/cable/ts7800.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/jlink.c,
|
|
src/tap/cable/generic.c, src/tap/cable/vision_ep9307.c,
|
|
src/tap/cable/ea253.c, src/tap/cable/triton.c, src/tap/cable/ei012.c,
|
|
src/tap/cable/byteblaster.c, src/tap/cable/generic.h,
|
|
src/tap/cable/ft2232.c, src/tap/cable/wiggler2.c,
|
|
src/tap/cable/keithkoep.c, src/tap/cable/lattice.c,
|
|
src/tap/cable/dlc5.c, src/tap/cable/xpc.c, src/svf/svf.c:
|
|
[ 2187351 ] Direct JTAG signal access, get/set_trst extension;
|
|
Integrated changes from getset_pod branch, substituting the
|
|
get/set_trst cable functions with more mighty get/set_signal
|
|
functions. Finally, this gives low level access to cable signals
|
|
as Sebastian Hesselbarth suggested and implemented first (thanks).
|
|
Arnim implemented it for the FTDI cable drivers, while I worked
|
|
on the parport cable drivers and new "pod" command.
|
|
|
|
2009-01-16 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/parse.c: flush_chain() between commands read from file
|
|
[ 2499176 ] No chain_flush() when executing commands from file
|
|
|
|
2009-01-03 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac, src/bus/bscoach.c, src/bus/buses.c,
|
|
src/bus/buses.h, src/bus/Makefile.am:
|
|
[ 2187115 ] Bus driver for Goepel Boundary Scan Coach
|
|
(by Markus Schneider)
|
|
|
|
2008-12-23 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf.c: added debug output for svf_compare_tdo()
|
|
|
|
2008-12-23 Kolja Waschk <kawk>
|
|
|
|
* src/tap/parport/direct.c, configure.ac, doc/UrJTAG.txt:
|
|
Dynamically load the InpOut32.dll for parallel port access. Tested
|
|
in MinGW environment (Cygwin GCC with -mno-cygwin flag), and
|
|
documented how to compile it. Could build a distributable EXE now.
|
|
|
|
* src/cmd/usleep.c, sysdep.h: usleep() is declared in
|
|
unistd.h, also present in modern MinGW environments.
|
|
Defining it in sysdep.h collides with unistd.h.
|
|
|
|
2008-12-22 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/usbblaster.c:
|
|
limit maximum number of bytes queued, equivalent for
|
|
Bug 2456024 - FTD2XX fails with certain SVF file
|
|
|
|
* src/tap/cable/ft2232.c:
|
|
set cable frequency to real FT2232 frequency
|
|
|
|
* src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c,
|
|
include/usbconn/libftdx.h, src/tap/cable/ft2232.c:
|
|
increased MPSSE buffer size from 4k to 64k
|
|
mitigates performance decrease for mid-sized clock operations
|
|
|
|
2008-12-21 Kolja Waschk <kawk>
|
|
|
|
* src/svf/svf.c: Fix 2456021 - SVF compare_tdo flaw
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/cmd_xfer.c,
|
|
src/tap/cable/cmd_xfer.h: limit maximum number of bytes queued
|
|
into one cmd buffer. Should fix problems with high clocks count for
|
|
SVF runtest execution (Bug 2456024 - FTD2XX fails with certain SVF file)
|
|
|
|
* configure.ac, src/tap/parport/direct.c: added detection of InpOut32
|
|
library and support for using it for I/O port access even under Vista
|
|
|
|
2008-12-17 Kolja Waschk <kawk>
|
|
|
|
* src/tap/discovery.c: Optional (#ifdef) printf for discovery debugging
|
|
|
|
2008-12-16 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am: Added bcm6358 files, thanks Anselmo Luginbuehl
|
|
|
|
2008-12-09 Kolja Waschk <kawk>
|
|
|
|
* data/broadcom/bcm6358, data/broadcom/bcm6358/bcm6358,
|
|
data/broadcom/bcm6358/STEPPINGS, data/broadcom/PARTS:
|
|
[ 2412479 ] neufbox4 support. BCM6358 data files (by
|
|
Julien Aube, slightly modified)
|
|
|
|
* src/flash/amd.c: [ 2412481 ] neufbox4 support: MX29LV640B
|
|
recognition (by Julien Aube)
|
|
|
|
2008-12-08 Julien Aube <obconseil@gmail.com>
|
|
|
|
* src/bus/ejtag_dma.c, src/bus/Makefile.am, src/bus/buses.c,
|
|
src/bus/buses.h, configure.ac: [ 2412486 ] Support for ejtag in DMA mode.
|
|
|
|
2008-12-07 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/analog/bf518/bf518, data/analog/bf518/STEPPINGS, data/analog/PARTS,
|
|
data/Makefile.am: Initial support for BF518 processors.
|
|
|
|
* data/analog/bf548/STEPPINGS: Add 0.3 silicon revision.
|
|
|
|
* data/analog/PARTS: Add BF534 and BF548M ids.
|
|
|
|
2008-12-03 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/generic_usbconn.c,
|
|
src/tap/cable.c, doc/UrJTAG.txt:
|
|
[ 2382324 ] Patch to add support for TinCanTools Flyswatter JTAG cable
|
|
(Mark Norman)
|
|
|
|
* include/flash.h, src/flash/amd_flash.c, src/flash/amd.c,
|
|
src/flash/intel.c, src/flash/flash.c, configure.ac:
|
|
restructure multi-byte flash programming support
|
|
flashmem no longer needs to know about the capabilities of
|
|
the flash chip to handle multi-byte programming
|
|
|
|
2008-12-02 Arnim Laeuger <arniml>
|
|
|
|
* include/flash/intel.h, src/flash/intel.c:
|
|
support for multi-byte write mode
|
|
chips must match the following criteria to qualify
|
|
- CFI data specifies multi-byte write mode supported
|
|
- handled by intel.c
|
|
- 8 or 16 bit interface
|
|
|
|
2008-12-01 Arnim Laeuger <arniml>
|
|
* include/flash.h, src/flash/amd_flash.c, src/flash/amd.c,
|
|
src/flash/intel.c, src/flash/flash.c, configure.ac:
|
|
support multi-byte write mode
|
|
chips must match the following criteria to qualify
|
|
- CFI data specifies multi-byte write mode supported
|
|
- handled by amd.c
|
|
- 8 or 16 bit interface
|
|
|
|
* src/bus/prototype.c (prototype_bus_new): consider amode parameter properly
|
|
when specified on the command line. pervious version didn't set ASHIFT in
|
|
this case.
|
|
|
|
* src/flash/amd.c (amd_flash_print_info): added Spansion S92GL chips
|
|
|
|
2008-11-16 Kolja Waschk <kawk>
|
|
|
|
* src/bus/ejtag.c: Support BCM6348/EJTAG 3.1 (by Andy Potter/livebox)
|
|
|
|
2008-10-30 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf_bison.y, src/svf/svf.c, src/svf/svf.h:
|
|
removed obsolete parameter
|
|
|
|
* include/svf.h, src/cmd/svf.c, src/svf/svf.c,
|
|
src/svf/svf_bison.y, src/svf/svf.h, doc/UrJTAG.txt:
|
|
add the ref_freq option to svf command
|
|
|
|
2008-10-28 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/parse.c (jtag_parse_stream): avoid clipping message when
|
|
reading comments (Hartley)
|
|
|
|
* renamed data/lattice/lfec2-12e/lfec2_12e to lfec2-12e
|
|
|
|
* data/MANUFACTURERS, data/lattice/lfec2-12e, data/lattice/lfec2-12e/lfec2_12e,
|
|
data/lattice/lfec2-12e/STEPPINGS, data/lattice/PARTS, data/lattice/lc4064zc,
|
|
data/lattice/lc4064zc/lc4064zc, data/lattice/lc4064zc/STEPPINGS, data/marvell/88e1118,
|
|
data/marvell/88e1118/88e1118, data/marvell/88e1118/STEPPINGS, data/marvell/88f5182,
|
|
data/marvell/88f5182/88f5182-a2, data/marvell/88f5182/STEPPINGS, data/marvell/PARTS,
|
|
data/Makefile.am:
|
|
[ 2187342 ] Technologic Systems TS-7800 JTAG support
|
|
(Catalin Ionescu)
|
|
part description files
|
|
|
|
2008-10-26 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac, doc/UrJTAG.txt, src/tap/Makefile.am,
|
|
src/tap/cable/ts7800.c, src/tap/cable.c, THANKS:
|
|
[ 2187342 ] Technologic Systems TS-7800 JTAG support
|
|
(Catalin Ionescu, Stanislav Sinyagin)
|
|
cable driver only
|
|
|
|
* src/cmd/print.c, doc/UrJTAG.txt:
|
|
[ 1964834 ] Add 'print instruction' support to print command
|
|
(Hartley Sweeten)
|
|
|
|
2008-10-23 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf_bison.y: initialize max_time to 0.0 if
|
|
the optional MAXIMUM is missing for RUNTEST commands
|
|
|
|
2008-10-22 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/generic.c: make calibration loop more tolerant for
|
|
less accurate OS timers
|
|
|
|
2008-10-18 Kolja Waschk <kawk
|
|
|
|
* src/cmd/usleep.c, src/cmd/cmd.c, src/cmd/Makefile.am:
|
|
Add usleep command (Stanislav Sinyagin)
|
|
|
|
2008-10-18 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/generic_usbconn.c:
|
|
Add support for ARM-USB-OCD TINY (Sebastian Hesselbarth)
|
|
|
|
2008-10-13 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_transfer_schedule): Don't
|
|
access memory out of bounds.
|
|
|
|
2008-10-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/ejtag.c (ejtag_bus_init): added remaining return values
|
|
(Stanislav Sinyagin)
|
|
|
|
2008-09-27 Arnim Laeuger <arniml>
|
|
|
|
* include/jtag.h, src/cmd/detect.c, src/cmd/initbus.c,
|
|
src/cmd/print.c, src/bus/bf548_ezkit.c, src/bus/fjmem.c,
|
|
src/bus/ppc405ep.c, src/bus/sh7727.c, src/bus/prototype.c,
|
|
src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
|
|
src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
|
|
src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
|
|
src/bus/avr32.c, src/bus/h7202.c, src/bus/zefant-xs3.c,
|
|
src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
|
|
src/bus/readmem.c, src/bus/au1500.c, src/bus/lh7a400.c,
|
|
src/bus/sh7751r.c, src/bus/generic_bus.c, src/bus/mpc5200.c,
|
|
src/bus/jopcyc.c, src/bus/bf561_ezkit.c, src/bus/slsup3.c,
|
|
src/bus/writemem.c, src/bus/s3c4510x.c, src/bus/ejtag.c,
|
|
src/flash/amd_flash.c, src/flash/cfi.c, src/flash/jedec_exp.c,
|
|
src/flash/jedec.c, src/flash/intel.c:
|
|
[ 2102453 ] Use macros for std return values instead of literals
|
|
|
|
2008-09-16 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/analog/bf527/STEPPINGS: Add bf527 0.2.
|
|
* data/analog/bf533/STEPPINGS: Add bf533 0.5 and 0.6.
|
|
* data/analog/bf548/STEPPINGS: Add bf548 0.2.
|
|
|
|
2008-09-15 Arnim Laeuger <arniml>
|
|
|
|
* src/svf/svf.h, src/svf/svf_flex.l: SVF player fix for
|
|
[ 2112823 ] Conversion with strtod and similar influenced by locale
|
|
|
|
2008-09-14 Kolja Waschk <kawk>
|
|
|
|
Version 0.9 released.
|
|
|
|
2008-09-14 Kolja Waschk <kawk>
|
|
|
|
* configure.ac, NEWS, po/fr.po, po/rw.po, po/sk.po: Preparation
|
|
for release of UrJTAG 0.9 tarball
|
|
* include/Makefile.am, src/bsdl/Makefile.am: list new header
|
|
files here so they get included in distribution
|
|
|
|
2008-09-09 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/detect.c: test correct return value of bus->driver->init()
|
|
|
|
* src/bsdl2jtag.c: fix from and to for downto vectors
|
|
|
|
2008-09-06 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftdi.c, src/tap/usbconn/libftd2xx.c:
|
|
[ 2091744 ] Automatic detection of alternative VID/PID cables broken
|
|
|
|
* src/tap/cable/usbblaster.c: set fixed frequency and print warning
|
|
if a different frequency is requested
|
|
|
|
* src/tap/cable/generic.c: fixed calibration loop
|
|
|
|
* src/svf/svf.c: require frequency setting from cable for
|
|
RUNTEST MIN SEC command, fixes
|
|
[ 2090432 ] SVF programming problem with "x SEC" arg to runtest
|
|
also restore previous frequency setting at end of SVF execution
|
|
|
|
2008-09-04 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac, src/tap/usbconn/libftd2xx.c,
|
|
src/tap/usbconn/libftdi.c: forward and use the desc= paramter
|
|
[ 2085244 ] Wrong device chosen by ftd2xx driver
|
|
|
|
2008-09-03 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftd2xx.c, src/tap/usbconn/libftdi.c:
|
|
use puts() and printf() instead of perror()
|
|
|
|
2008-09-03 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/parport/ppdev.c, src/tap/cable/wiggler.c,
|
|
src/tap/cable/generic_parport.c: Change HAVE_LINUX_PPDEV_H to
|
|
ENABLE_LOWLEVEL_PPDEV.
|
|
|
|
* src/tap/cable/generic_parport.c, src/tap/cable/wiggler.c:
|
|
Fix typo: PPDEF -> PPDEV.
|
|
|
|
2008-08-27 Arnim Laeuger <arniml>
|
|
|
|
* include/Makefile.am, include/bsdl.h, include/bsdl_mode.h,
|
|
src/cmd/include.c, src/cmd/bsdl.c, src/bsdl/vhdl_parser.h,
|
|
src/bsdl/bsdl_msg.h, src/bsdl/bsdl.c, src/bsdl/bsdl_bison.y,
|
|
src/bsdl/vhdl_flex.l, src/bsdl/bsdl_parser.h, src/bsdl/bsdl_sem.c,
|
|
src/bsdl/bsdl_flex.l, src/bsdl/bsdl_types.h, src/bsdl/vhdl_bison.y,
|
|
src/tap/detect.c: cleaned-up bsdl subsystem, avoid double reading
|
|
during detect, commenting
|
|
|
|
2008-08-24 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_sem.c (bsdl_process_cell_info): fix error with
|
|
repeated usage of cmd[]
|
|
|
|
2008-08-22 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/vhdl_bison.y: enhanced error reporting
|
|
|
|
* configure.ac, data/Makefile.am, src/Makefile.am,
|
|
src/bsdl/Makefile.am, src/bsdl/bsdl.c, src/bsdl/bsdl_bison.y,
|
|
src/bsdl/bsdl_flex.l, src/bsdl/bsdl_sem.c, src/bsdl/bsdl_sysdep.h,
|
|
data/bsdl/STD_1532_2001, data/bsdl/STD_1532_2002, src/bsdl/bsdl_msg.h,
|
|
src/bsdl/bsdl_parser.h, src/bsdl/bsdl_types.h, src/bsdl/vhdl_bison.y,
|
|
src/bsdl/vhdl_flex.l, src/bsdl/vhdl_parser.h, src/bsdl/bsdl_local.h:
|
|
merged from branches/bsdl 1304:1340
|
|
rewrite of BSDL parser
|
|
|
|
2008-07-15 Arnim Laeuger <arniml>
|
|
|
|
* doc/UrJTAG.txt, src/cmd/dr.c (cmd_dr_help):
|
|
document feature to set active data register with dr
|
|
|
|
2008-07-14 Arnim Laeuger <arniml>
|
|
|
|
* include/chain.h, include/tap.h, src/cmd/reset.c, src/tap/detect.c,
|
|
src/tap/chain.c, src/tap/tap.c, src/bus/fjmem.c, src/bus/avr32.c:
|
|
[ 1873260 ] Command 'reset' does not reset internal states
|
|
next round to fix this one
|
|
|
|
2008-07-10 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftd2xx.c (usbconn_ftd2xx_open): perform device reset
|
|
and RX purge
|
|
|
|
2008-07-09 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftd2xx.c: added some debugging messages
|
|
|
|
* src/tap/usbconn/libftd2xx.c (usbconn_ftd2xx_write),
|
|
src/tap/usbconn/libftdi.c (usbconn_ftdi_write): don't subtract from
|
|
p->to_recv
|
|
|
|
2008-07-03 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/lib/ansidecl.h, src/lib/libiberty.h: Import headers from binutils
|
|
that the local src/lib/ files need for relocatable support.
|
|
* src/lib/Makefile.am (libiberty_sources): Add local headers to the list.
|
|
|
|
2008-07-03 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bsdl/bsdl.c: Remove trailing whitespaces.
|
|
* src/lib/make-relative-prefix.c: Likewise.
|
|
* src/lib/lbasename.c: Likewise.
|
|
* src/lib/lrealpath.c: Likewise.
|
|
* doc/UrJTAG.txt: Likewise.
|
|
* data/atmel/PARTS: Likewise.
|
|
|
|
* src/bus/bf537_stamp.c (bus_driver_t bf538f_ezkit_bus): New.
|
|
(bus_driver_t bf526_ezkit_bus): New.
|
|
* src/bus/buses.c (bus_drivers[]): Add bf526_ezkit_bus and
|
|
bf538f_ezkit_bus.
|
|
* src/bus/buses.h (bf526_ezkit_bus): Declare.
|
|
(bf538f_ezkit_bus): Declare.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Add bf537_stamp.c
|
|
for bf526 ezkit and bf538f ezkit.
|
|
* configure.ac: Add bf526_ezkit and bf538f_ezkit.
|
|
* data/analog/PARTS: Add bf538.
|
|
* analog/bf538/STEPPINGS: New file.
|
|
* analog/bf538/bf538: New file.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Add
|
|
analog/bf538/STEPPINGS and analog/bf538/bf538.
|
|
|
|
* src/tap/cable/ft2232.c: Make the gnICE comment a little more specific.
|
|
|
|
2008-07-02 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* include/bus_driver.h (struct bus_driver): Add driver argument
|
|
to new_bus.
|
|
* src/cmd/initbus.c (cmd_initbus_run): Pass driver to new_bus.
|
|
* src/bus/bf548_ezkit.c (bf548_ezkit_bus_new): Add driver
|
|
argument and use it.
|
|
* src/bus/fjmem.c (fjmem_bus_new): Likewise.
|
|
* src/bus/ppc405ep.c (ppc405ep_bus_new): Likewise.
|
|
* src/bus/sh7727.c (sh7727_bus_new): Likewise.
|
|
* src/bus/prototype.c (prototype_bus_new): Likewise.
|
|
* src/bus/sa1110.c (sa1110_bus_new): Likewise.
|
|
* src/bus/ppc440gx_ebc8.c (ppc440gx_ebc8_bus_new): Likewise.
|
|
* src/bus/sh7750r.c (sh7750r_bus_new): Likewise.
|
|
* src/bus/tx4925.c (tx4925_bus_new): Likewise.
|
|
* src/bus/bf533_stamp.c (bf533_stamp_bus_new): Likewise.
|
|
* src/bus/bf533_ezkit.c (bf533_ezkit_bus_new): Likewise.
|
|
* src/bus/ixp425.c (ixp425_bus_new): Likewise.
|
|
* src/bus/avr32.c (avr32_bus_new): Likewise.
|
|
* src/bus/zefant-xs3.c (zefant_xs3_bus_new): Likewise.
|
|
* src/bus/h7202.c (h7202_bus_new): Likewise.
|
|
* src/bus/mpc824x.c (mpc824x_bus_new): Likewise.
|
|
* src/bus/bcm1250.c (bcm1250_bus_new): Likewise.
|
|
* src/bus/sharc21065l.c (sharc_21065L_bus_new): Likewise.
|
|
* src/bus/au1500.c (au1500_bus_new): Likewise.
|
|
* src/bus/lh7a400.c (lh7a400_bus_new): Likewise.
|
|
* src/bus/sh7751r.c (sh7751r_bus_new): Likewise.
|
|
* src/bus/mpc5200.c (mpc5200_bus_new): Likewise.
|
|
* src/bus/jopcyc.c (jopcyc_bus_new): Likewise.
|
|
* src/bus/bf561_ezkit.c (bf561_ezkit_bus_new): Likewise.
|
|
* src/bus/slsup3.c (slsup3_bus_new): Likewise.
|
|
* src/bus/s3c4510x.c (s3c4510_bus_new): Likewise.
|
|
* src/bus/ejtag.c (ejtag_bus_new): Likewise.
|
|
* src/bus/pxa2x0.c (pxa2xx_bus_new_common): Remove.
|
|
(pxa2xx_bus_new): New.
|
|
(pxa2x0_bus_new): Remove.
|
|
(pxa27x_bus_new): Remove.
|
|
(pxa2xx_bus_printinfo): New.
|
|
(pxa2x0_bus_printinfo): Remove.
|
|
(pxa27x_bus_printinfo): Remove.
|
|
(bus_driver_t pxa2x0_bus): Replace pxa2x0_bus_new with
|
|
pxa2xx_bus_new. Replace pxa2x0_bus_printinfo with
|
|
pxa2xx_bus_printinfo.
|
|
(bus_driver_t pxa27x_bus): Replace pxa27x_bus_new with
|
|
pxa2xx_bus_new. Replace pxa27x_bus_printinfo with
|
|
pxa2xx_bus_printinfo.
|
|
* src/bus/bf537_stamp.c (bf537_stamp_bus_new_1): Rename
|
|
to ...
|
|
(bf537_stamp_bus_new): ... this. And use the new driver
|
|
argument.
|
|
(bf537_ezkit_bus_new): Remove.
|
|
(bf527_ezkit_bus_new): Remove.
|
|
(bf537_stamp_bus_printinfo): Use description in bus driver.
|
|
(bf537_ezkit_bus_printinfo): Remove.
|
|
(bf527_ezkit_bus_printinfo): Remove.
|
|
(BF537_STAMP_BUS_FUNCTIONS): Define.
|
|
(bus_driver_t bf537_stamp_bus): Use BF537_STAMP_BUS_FUNCTIONS.
|
|
(bus_driver_t bf537_ezkit_bus): Likewise.
|
|
(bus_driver_t bf527_ezkit_bus): Likewise.
|
|
|
|
2008-06-28 Kolja Waschk <kawk>
|
|
|
|
* data/sigma/smp8634/smp8634, data/sigma/smp8634/STEPPINGS,
|
|
data/sigma/PARTS, data/Makefile.am: Added Sigma SMP8634 (andi2k)
|
|
* doc/UrJTAG.txt: FAQ about CVS needed for autogen.sh and superuser
|
|
rights being needed for running "make install" (frankvh)
|
|
|
|
2008-06-27 Arnim Laeuger <arniml>
|
|
|
|
* UrJTAG.txt: JTAGkey-Tiny
|
|
|
|
* UrJTAG.txt: update of bus driver init() function
|
|
* include/bus_driver.h, src/cmd/initbus.c, src/bus/bf548_ezkit.c,
|
|
src/bus/fjmem.c, src/bus/ppc405ep.c, src/bus/sh7727.c,
|
|
src/bus/prototype.c, src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c,
|
|
src/bus/tx4925.c, src/bus/sh7750r.c, src/bus/pxa2x0.c,
|
|
src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c,
|
|
src/bus/ixp425.c, src/bus/avr32.c, src/bus/h7202.c,
|
|
src/bus/zefant-xs3.c, src/bus/mpc824x.c, src/bus/bcm1250.c,
|
|
src/bus/sharc21065l.c, src/bus/au1500.c, src/bus/lh7a400.c,
|
|
src/bus/sh7751r.c, src/bus/generic_bus.c, src/bus/mpc5200.c,
|
|
src/bus/jopcyc.c, src/bus/bf561_ezkit.c, src/bus/slsup3.c,
|
|
src/bus/s3c4510x.c, src/bus/ejtag.c, src/bus/generic_bus.h:
|
|
[ 1984813 ] Bus driver cleanup, separate (*init) and (*prepare)
|
|
functions (Hartley Sweeten)
|
|
|
|
2008-06-24 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
From Michael Hennerich <michael.hennerich@analog.com>
|
|
* src/tap/cable.c (ft2232_bfin_ujtag_cable_driver): Rename to ...
|
|
(ft2232_gnice_cable_driver): ... this.
|
|
(cable_drivers[]): Change accordingly.
|
|
* src/tap/cable/generic_usbconn.c
|
|
(usbconn_cable_bfin_ujtag_ftd2xx): Rename to ...
|
|
(usbconn_cable_gnice_ftd2xx): ... this.
|
|
(usbconn_cable_bfin_ujtag_ftdi): Rename to ...
|
|
(usbconn_cable_gnice_ftdi): ... this.
|
|
* src/tap/cable/ft2232.c (BIT_BFIN_UJTAG_nTRST): Rename to ...
|
|
(BIT_GNICE_nTRST): ... this.
|
|
(BIT_BFIN_UJTAG_nLED): Rename to ...
|
|
(BIT_GNICE_nLED): ... this.
|
|
(BITMASK_BFIN_UJTAG_nTRST): Rename to ...
|
|
(BITMASK_GNICE_nTRST): ... this.
|
|
(BITMASK_BFIN_nLED): Rename to ...
|
|
(BITMASK_GNICE_nLED): ... this.
|
|
(ft2232_bfin_urjtag_init): Rename to ...
|
|
(ft2232_gnice_init): ... this.
|
|
(ft2232_bfin_urjtag_done): Rename to ...
|
|
(ft2232_gnice_done): ... this.
|
|
(usbconn_cable_bfin_ujtag_ftdi): Rename to ...
|
|
(usbconn_cable_gnice_ftdi): ... this.
|
|
(ft2232_usbcable_help): Change accordingly.
|
|
(ft2232_bfin_ujtag_cable_driver): Rename to ...
|
|
(ft2232_gnice_cable_driver): ... this.
|
|
(usbconn_cable_bfin_ujtag_ftdi): Rename to ...
|
|
(usbconn_cable_gnice_ftdi): ... this.
|
|
(usbconn_cable_bfin_ujtag_ftd2xx): Rename to ...
|
|
(usbconn_cable_gnice_ftd2xx): ... this.
|
|
* po/fr.po: Update.
|
|
* po/rw.po: Update.
|
|
* po/sk.po: Update.
|
|
|
|
2008-06-21 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
|
|
src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
|
|
src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c, src/bus/sh7750r.c,
|
|
src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
|
|
src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/h7202.c,
|
|
src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
|
|
src/bus/au1500.c, src/bus/lh7a400.c, src/bus/sh7751r.c,
|
|
src/bus/generic_bus.c, src/bus/mpc5200.c, src/bus/bf561_ezkit.c,
|
|
src/bus/slsup3.c, src/bus/generic_bus.h:
|
|
[ 1984813 ] Bus driver cleanup, generic_bus_prepare function for
|
|
all bus drivers that just load the EXTEST instruction
|
|
(Hartley Sweeten)
|
|
|
|
2008-06-18 Arnim Laeuger <arniml>
|
|
|
|
* include/bus_driver.h, src/bus/bf548_ezkit.c, src/bus/fjmem.c,
|
|
src/bus/ppc405ep.c, src/bus/sh7727.c, src/bus/prototype.c,
|
|
src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
|
|
src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
|
|
src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
|
|
src/bus/avr32.c, src/bus/h7202.c, src/bus/zefant-xs3.c,
|
|
src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
|
|
src/bus/au1500.c, src/bus/lh7a400.c, src/bus/sh7751r.c,
|
|
src/bus/mpc5200.c, src/bus/jopcyc.c, src/bus/bf561_ezkit.c,
|
|
src/bus/slsup3.c, src/bus/s3c4510x.c, src/bus/ejtag.c:
|
|
[ 1984813 ] Bus driver cleanup, uniquify chain and part in
|
|
bus_t struct (Hartley Sweeten)
|
|
|
|
2008-06-16 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/initbus.c (cmd_initbus_run),
|
|
src/cmd/initbus.c, src/bus/bf548_ezkit.c, src/bus/fjmem.c,
|
|
src/bus/ppc405ep.c, src/bus/sh7727.c, src/bus/prototype.c,
|
|
src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
|
|
src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
|
|
src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
|
|
src/bus/avr32.c, src/bus/h7202.c, src/bus/zefant-xs3.c,
|
|
src/bus/mpc824x.c, src/bus/bcm1250.c, src/bus/sharc21065l.c,
|
|
src/bus/au1500.c, src/bus/lh7a400.c, src/bus/sh7751r.c,
|
|
src/bus/mpc5200.c, src/bus/jopcyc.c, src/bus/bf561_ezkit.c,
|
|
src/bus/slsup3.c, src/bus/s3c4510x.c, src/bus/ejtag.c:
|
|
[ 1984813 ] Bus driver cleanup, remove unnecessary sanity checking
|
|
(Hartley Sweeten)
|
|
|
|
2008-06-11 Arnim Laeuger <arniml>
|
|
|
|
* po/fr.po, po/rw.po, po/sk.po: updated
|
|
|
|
* src/tap/cable/generic.c (fmax): define fallback in case libm doesn't
|
|
provide fmax()
|
|
* configure.ac: detect availability of fmax() in libm
|
|
|
|
* src/bus/bf548_ezkit.c, src/bus/ppc405ep.c, src/bus/sh7727.c,
|
|
src/bus/sa1110.c, src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c,
|
|
src/bus/sh7750r.c, src/bus/pxa2x0.c, src/bus/bf533_stamp.c,
|
|
src/bus/bf533_ezkit.c, src/bus/bf537_stamp.c, src/bus/ixp425.c,
|
|
src/bus/h7202.c, src/bus/mpc824x.c, src/bus/bcm1250.c,
|
|
src/bus/sharc21065l.c, src/bus/au1500.c, src/bus/lh7a400.c,
|
|
src/bus/sh7751r.c, src/bus/mpc5200.c, src/bus/jopcyc.c,
|
|
src/bus/bf561_ezkit.c, src/bus/slsup3.c, src/bus/s3c4510x.c:
|
|
[ 1984813 ] Bus driver cleanup, second step of part 2) (Hartley Sweeten)
|
|
use generic_bus_attach_sig() in all bus drivers
|
|
|
|
2008-06-10 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/generic_bus.c, src/bus/generic_bus.h, src/bus/zefant-xs3.c:
|
|
[ 1984813 ] Bus driver cleanup, first step of part 2) (Hartley Sweeten)
|
|
generic_bus_attach_sig() added
|
|
|
|
* src/bus/au1500.c, src/bus/avr32.c, src/bus/bcm1250.c,
|
|
src/bus/bf533_ezkit.c, src/bus/bf533_stamp.c, src/bus/bf537_stamp.c,
|
|
src/bus/bf548_ezkit.c, src/bus/bf561_ezkit.c, src/bus/ejtag.c,
|
|
src/bus/fjmem.c, src/bus/generic_bus.c, src/bus/generic_bus.h,
|
|
src/bus/h7202.c, src/bus/ixp425.c, src/bus/jopcyc.c,
|
|
src/bus/lh7a400.c, src/bus/mpc5200.c, src/bus/mpc824x.c,
|
|
src/bus/ppc405ep.c, src/bus/ppc440gx_ebc8.c, src/bus/prototype.c,
|
|
src/bus/pxa2x0.c, src/bus/s3c4510x.c, src/bus/sa1110.c,
|
|
src/bus/sh7727.c, src/bus/sh7750r.c, src/bus/sh7751r.c,
|
|
src/bus/sharc21065l.c, src/bus/slsup3.c, src/bus/tx4925.c,
|
|
src/bus/zefant-xs3.c:
|
|
[ 1984813 ] Bus driver cleanup, second step of part 4) (Hartley Sweeten)
|
|
generic_bus_read() added
|
|
|
|
2008-06-09 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
|
|
src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
|
|
src/bus/ppc440gx_ebc8.c, src/bus/tx4925.c, src/bus/sh7750r.c,
|
|
src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
|
|
src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/avr32.c,
|
|
src/bus/h7202.c, src/bus/zefant-xs3.c, src/bus/mpc824x.c,
|
|
src/bus/bcm1250.c, src/bus/sharc21065l.c, src/bus/au1500.c,
|
|
src/bus/lh7a400.c, src/bus/sh7751r.c, src/bus/mpc5200.c,
|
|
src/bus/jopcyc.c, src/bus/bf561_ezkit.c, src/bus/slsup3.c,
|
|
src/bus/s3c4510x.c, src/bus/ejtag.c:
|
|
[ 1984813 ] Bus driver cleanup, first step of part 4) (Hartley Sweeten)
|
|
|
|
* src/svf/svf_flex.l, src/flash/flash.c (flashmem):
|
|
avoid '\r' in i18n strings (Hartley Sweeten)
|
|
* po/fr.po, po/rw.po, po/sk.po: remove '\r'
|
|
|
|
2008-06-06 Kolja Waschk <kawk>
|
|
|
|
* src/bus/bcm1250.c: Allow for 8 IO_CS_L signals, not just 7
|
|
(Hartley Sweeten)
|
|
|
|
* src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
|
|
src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
|
|
src/bus/ppc440gx_ebc8.c, src/bus/sh7750r.c, src/bus/tx4925.c,
|
|
src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
|
|
src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/avr32.c,
|
|
src/bus/zefant-xs3.c, src/bus/h7202.c, src/bus/mpc824x.c,
|
|
src/bus/bcm1250.c, src/bus/sharc21065l.c, src/bus/au1500.c,
|
|
src/bus/lh7a400.c, src/bus/sh7751r.c, src/bus/generic_bus.c,
|
|
src/bus/mpc5200.c, src/bus/jopcyc.c, src/bus/Makefile.am,
|
|
src/bus/slsup3.c, src/bus/bf561_ezkit.c, src/bus/s3c4510x.c,
|
|
src/bus/ejtag.c, src/bus/generic_bus.h: [ 1984813 ] Bus driver
|
|
cleanup: Unified *bus_free functions and moved them to new
|
|
src/bus/generic_bus.c/h (Hartley Sweeten)
|
|
|
|
2008-06-05 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/usbconn/libftdi.c: issue device reset in usbconn_ftdi_open(), fixes
|
|
hang of FT245 chip when initializing the cable more than once
|
|
* src/tap/cable/usbblaster.c: split get_tdo and transfer functions into schedule
|
|
finish parts for deeper queueing with extended flush function
|
|
|
|
2008-06-05 Kolja Waschk <kawk>
|
|
|
|
* src/bus/bf548_ezkit.c, src/bus/fjmem.c, src/bus/ppc405ep.c,
|
|
src/bus/sh7727.c, src/bus/prototype.c, src/bus/sa1110.c,
|
|
src/bus/ppc440gx_ebc8.c, src/bus/sh7750r.c, src/bus/tx4925.c,
|
|
src/bus/pxa2x0.c, src/bus/bf533_stamp.c, src/bus/bf533_ezkit.c,
|
|
src/bus/bf537_stamp.c, src/bus/ixp425.c, src/bus/avr32.c,
|
|
src/bus/zefant-xs3.c, src/bus/h7202.c, src/bus/mpc824x.c,
|
|
src/bus/bcm1250.c, src/bus/sharc21065l.c, src/bus/au1500.c,
|
|
src/bus/lh7a400.c, src/bus/sh7751r.c, src/bus/mpc5200.c,
|
|
src/bus/jopcyc.c, src/bus/slsup3.c, src/bus/bf561_ezkit.c,
|
|
src/bus/s3c4510x.c, src/bus/ejtag.c: Partial [ 1984813 ]
|
|
Bus driver cleanup: Changed mallocs to callocs, added (NULL) pointer
|
|
for *init to the drivers where it was missing (Hartley Sweeten)
|
|
|
|
2008-05-29 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/wiggler.c src/tap/cable/generic_usbconn.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/vision_ep9307.c,
|
|
src/tap/cable/jim.c, src/tap/cable/ft2232.c,
|
|
src/tap/cable/generic_parport.c: More malloc/free cleanup
|
|
in cable drivers (Hartley Sweeten)
|
|
|
|
2008-05-28 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/cable.c, src/tap/cable/wiggler.c,
|
|
src/tap/cable/generic_usbconn.c, src/tap/cable/vision_ep9307.c,
|
|
src/tap/cable/jim.c, src/tap/cable/ft2232.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/generic_parport.c: Cable
|
|
connect/disconnect cleanup, fix malloc/free issues (Hartley Sweeten)
|
|
|
|
2008-05-27 Arnim Laeuger <arniml>
|
|
|
|
* UrJTAG.txt: document progress option of svf command
|
|
* src/cmd/svf.c (cmd_svf_run): new command option 'progress'
|
|
* src/svf/svf.c (svf_run), include/svf.h (svf_run): new parameter
|
|
print_progress
|
|
* src/svf/svf_flex.l (fix_yylloc_nl): report line / total number
|
|
|
|
2008-05-26 Arnim Laeuger <arniml>
|
|
|
|
[adding svf progress output] (Steve Franks)
|
|
* src/svf/svf_bison.y (svf_bison_init): hand down parameters for scanner
|
|
initialization
|
|
* src/svf/svf_flex.l: output progress indicator upon newline detection
|
|
* src/svf/svf.c (svf_run): caluclate number of lines and pass result
|
|
to scanner initialization
|
|
* src/svf/svf.h: added "extra" data type for scanner
|
|
|
|
2008-05-26 Kolja Waschk <kawk>
|
|
|
|
* src/bus/avr32.c, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/Makefile.am, src/flash/amd.c, THANKS, configure.ac,
|
|
doc/UrJTAG.txt, data/atmel/at32ap7000, data/atmel/at32ap7000/at32ap7000,
|
|
data/atmel/at32ap7000/STEPPINGS, data/atmel/PARTS, data/Makefile.am:
|
|
add support for Atmel's AT32AP7000 (by Gabor Juhos)
|
|
|
|
2008-05-24 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/usbblaster.c (usbblaster_connect): added missing
|
|
malloc for cable_params
|
|
|
|
2008-05-23 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/analog/PARTS: Add BF526 id.
|
|
|
|
2008-05-21 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
[ 1951767 ] bsdl2jtag cannot parse some bsdl files
|
|
* src/bsdl2jtag.c (endline): Prevent `:' from being scanned in.
|
|
|
|
2008-05-21 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
[ 1968455 ] Enter UPDATE state after register shift
|
|
* include/chain.h (EXITMODE_UPDATE): Define.
|
|
* src/tap/tap.c (tap_defer_shift_register): Enter Update-DR
|
|
or Update-IR when requested.
|
|
|
|
2008-05-20 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c, src/tap/cable/usbblaster.c:
|
|
typo in help string fixed
|
|
* src/tap/cable/ft2232.c, src/tap/cable/usbblaster.c:
|
|
run on top of usbconn drivers
|
|
* src/tap/cable/cmd_xfer.c, src/tap/cable/cmd_xfer.h:
|
|
provide command queueing functions to ft2232.c and usbblaster.c
|
|
* src/tap/usbconn/libftd2xx.c, src/tap/usbconn/libftdi.c,
|
|
include/usbconn/libftdx.h, src/tap/parport/ftdi.c,
|
|
src/tap/parport/ftd2xx.c, src/tap/parport.c, src/tap/Makefile.am,
|
|
src/tap/usbconn.c, src/tap/cable/generic_usbconn.c,
|
|
src/tap/cable/generic_usbconn.h, doc/UrJTAG.txt:
|
|
ftdi & ftd2xx drivers ported from parport to usbconn
|
|
* src/tap/usbconn/libusb.c, include/usbconn.h: added read and write
|
|
* configure.ac: --enable-parport renamed to --enable-lowlevel
|
|
respective renaming for Makefile and C macros
|
|
|
|
2008-05-13 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/generic_usbconn.c: Read VID/PID as hexadecimal, fixes
|
|
Bug [1962628] VID/PID for usbconn cables are parsed as decimal
|
|
|
|
2008-05-12 Kolja Waschk <kawk>
|
|
|
|
* doc/jtag.1: Explanation of [file] argument, correct location
|
|
of rc file (thanks Steve Franks for noticing)
|
|
|
|
2008-05-09 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* data/analog/PARTS, data/Makefile.am, data/analog/bf527/:
|
|
Rename BF527c to BF527 and relocate files as appropriate.
|
|
* data/analog/PARTS, data/Makefile.am, data/analog/bf548/:
|
|
Rename BF549 to BF548 and relocate files as appropriate.
|
|
* data/analog/bf527/STEPPINGS: Add support for bf527 0.1.
|
|
|
|
2005-05-06 Kolja Waschk <kawk>
|
|
|
|
* acinclude.m4, src/cmd/cmd.c, src/jtag.c:
|
|
Update for [ 1940323 ] OS X support for UrJTAG (by Ville Voipio)
|
|
|
|
2008-05-05 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/svf/svf.c: Fix __MINGW32__ typo.
|
|
* src/flash/amd.c: Remove _() around part names.
|
|
* src/flash/amd_flash.c: Likewise.
|
|
* src/lib/safe-ctype.c: Include from libiberty as it is needed on some
|
|
non-POSIX ports (like mingw).
|
|
* src/cmd/include.c (cmd_include_or_script_run): Add handling of absolute
|
|
paths under Windows that take the form <letter>:\.
|
|
* sysdep.h, src/flash/amd.c, src/flash/amd_flash.c, src/jtag.c: Move some
|
|
Windows stub functions to sysdep.h so we don't have to redeclare them in
|
|
every single file and so we don't trigger future bitrot.
|
|
|
|
2008-05-04 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/flash/amd.c: Handle chipid 0x22ed M29W640DT.
|
|
|
|
2008-05-02 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/generic_usbconn.c (generic_usbconn_connect):
|
|
fix user_specified.driver comparison
|
|
|
|
2008-05-01 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* configure.ac: Check for libusb before libftdi since the latter needs
|
|
the former.
|
|
* configure.ac: Use AC_PATH_TOOL() instead of AC_PATH_PROG() so that we
|
|
handle cross-compiling sanely.
|
|
* configure.ac: Make LIBS/CPPFLAGS sane and consistent when checking for
|
|
libusb and libftdi.
|
|
* configure.ac: Use POSIX compliant tests for equality ("=", not "==").
|
|
|
|
2008-04-26 Kolja Waschk <kawk>
|
|
|
|
* src/flash/amd.c: Separate Chip name by Manufacturer (Andrey F. Ilchuk)
|
|
|
|
2008-04-24 Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* src/tap/usbconn/libusb.c (usbconn_libusb_connect): Use the
|
|
usb_get_busses() function rather than the usb_busses global
|
|
variable due to portability issues (like with libusb-win32).
|
|
* src/jtag.c (jtag_readline_loop): [ 1950315 ] Fix quiting when
|
|
using the non readline version.
|
|
* configure.ac: [ 1950061 ] Look for the ChangeLog in $srcdir.
|
|
|
|
2008-04-19 Kolja Waschk <kawk>
|
|
|
|
* src/tap/parport/ftd2xx.c: SetBaudRate to 3E6, not 48E6. Should
|
|
fix [ 1925509 ] ftd2xx: SetBaudRate fails with FT245
|
|
* src/flash/intel.c: Handle chips that support "Mitsubishi
|
|
standard/enhanced command set" just like Intel chips. Need
|
|
to do more research about the differences (if any) [1946559]
|
|
* src/tap/cable/usbblaster.c: clock() at highest possible rate
|
|
using the byte shift mode for n>=8 (Thanks M. Banditt)
|
|
* include/cmd.h, src/cmd/cmd.c, src/jtag.c: [ 1946331 ] command
|
|
completion support (by Mike Frysinger)
|
|
* configure.ac, acinclude.m4: [ 1946114 ] make AC_PROG_SED
|
|
workaround sane (Mike Frysinger)
|
|
* include/jtag.h, src/cmd/detect.c, src/tap/detect.c:
|
|
[ 1946119 ] fixup relocatable jtag in detection (M.Frysinger)
|
|
* src/cmd/frequency.c: ensure that cable is initialized. Fixes
|
|
[ 1933736 ] "frequency" command segfaults without args
|
|
|
|
2008-04-19 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/Makefile.am, src/svf/Makefile.am: ensure that
|
|
bsdl_bison.h is generated prior to compiling bsdl_flex.c and
|
|
bsdl_bison.c
|
|
[ 1943435 ] fixup bsdl parallel build issue (part2)
|
|
|
|
2008-04-13 Kolja Waschk <kawk>
|
|
|
|
* src/tap/parport/ftd2xx.c, src/tap/usbconn/libusb.c, src/lib/fclock.c,
|
|
src/jtag.c, src/flash/amd_flash.c, src/flash/amd.c, src/flash/jedec.c,
|
|
src/svf/svf.c, configure.ac, doc/UrJTAG.txt: Provide variants of
|
|
usleep, frealtime, mkdir for [ 1838732 ] EXE built with MinGW
|
|
|
|
2008-04-11 Kolja Waschk <kawk>
|
|
|
|
* src/bsdl/bsdl.c, src/tap/parport/ftd2xx.c, src/tap/parport/ftdi.c,
|
|
src/tap/usbconn/libusb.c, src/lib/fclock.c, src/jtag.c:
|
|
[ 1940323 ] OS X support for UrJTAG (by Ville Voipio)
|
|
|
|
2008-04-11 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/parport/ftdi.c (ftdi_flush_output): removed unused variables
|
|
|
|
2008-04-11 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
From Michael Hennerich <michael.hennerich@analog.com>
|
|
* src/tap/parport/ftdi.c (ftdi_generic_open): Detect
|
|
BFIN-UJTAG cable.
|
|
* src/tap/cable.c (ft2232_bfin_ujtag_cable_driver): Declare.
|
|
(cable_drivers): Add ft2232_bfin_ujtag_cable_driver.
|
|
* src/tap/cable/ft2232.c (BIT_BFIN_UJTAG_nTRST,
|
|
BIT_BFIN_UJTAG_nLED, BITMASK_BFIN_UJTAG_nTRST,
|
|
BITMASK_BFIN_UJTAG_nLED): Define.
|
|
(ft2232_bfin_ujtag_init): New.
|
|
(ft2232_bfin_ujtag_done): New.
|
|
(ft2232_bfin_ujtag_cable_driver): Define.
|
|
|
|
2008-04-10 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/flash/flash.c (flashmem): Show the address when verifying.
|
|
Show the end address when program and verify complete.
|
|
|
|
2008-04-10 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
From Stefan Pledl <stefan.pledl@mesutronic.de>
|
|
* src/bsdl2jtag.c (endline): Set mode to 0 for INSTRUCTION_LENGTH
|
|
and BOUNDARY_LENGTH attributes.
|
|
* data/atmel/atf15xx/STEPPINGS: New file.
|
|
* data/atmel/atf15xx/atf1504asv: New file.
|
|
* data/atmel/PARTS: Add atf15xx.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Add
|
|
atmel/atf15xx/STEPPINGS and atmel/atf15xx/atf1504asv.
|
|
|
|
2008-04-09 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bus/bf537_stamp.c (bf537_stamp_bus_new_1): Renamed
|
|
from bf537_stamp_bus_new, but don't set driver.
|
|
(bf537_stamp_bus_new): Call bf537_stamp_bus_new_1 and
|
|
set driver here.
|
|
(bf537_ezkit_bus_new): Likewise.
|
|
(bf527_ezkit_bus_new): Likewise.
|
|
(bf537_ezkit_bus): Replace bf537_stamp_bus_new with
|
|
bf537_ezkit_bus_new.
|
|
(bf527_ezkit_bus_printinfo): New.
|
|
(bf527_ezkit_bus): Define.
|
|
* src/bus/buses.c (bus_drivers[]): Add bf527_ezkit_bus.
|
|
* src/bus/buses.h (bf527_ezkit_bus): Declare.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Add bf537_stamp.c
|
|
if ENABLE_BUS_BF527_EZKIT. Allow ENABLE_BUS_BF537_EZKIT
|
|
independent on ENABLE_BUS_BF537_STAMP.
|
|
* configure.ac: Add bf527_ezkit.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Add
|
|
analog/bf527c/STEPPINGS and analog/bf527c/bf527c.
|
|
* data/analog/bf527c/bf527c: New file.
|
|
* data/analog/bf527c/STEPPINGS: New file.
|
|
* data/analog/PARTS: Add bf527c.
|
|
|
|
2008-04-09 Michael Hennerich <michael.hennerich@analog.com>
|
|
|
|
* data/analog/bf537/STEPPINGS: Add stepping 3.
|
|
|
|
2008-04-08 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_flex.l (bsdl_flex_deinit): close file if still open
|
|
|
|
2008-04-08 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/idcode.c: [ 1936543 ] Check for set-up cable in idcode (U.Bonnes)
|
|
|
|
2008-04-05 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/usbblaster.c: [ 1934843 ] Fix for USBBLASTER (U.Bonnes)
|
|
* src/jtag.c: [ 1933141 ] Don't add duplicate history lines (U.Bonnes)
|
|
|
|
2008-04-03 Kolja Waschk <kawk>
|
|
|
|
* src/jtag.c: Optionally use JTAG_PROMPT environment setting for
|
|
prompt instead of "jtag>" (by Mike Frysinger)
|
|
|
|
* include/jtag.h, src/cmd/jtag_data_dir.c, src/cmd/include.c,
|
|
src/cmd/Makefile.am, src/bsdl/Makefile.am, src/bsdl/bsdl_flex.l,
|
|
src/lib/make-relative-prefix.c, src/lib/safe-ctype.h,
|
|
src/lib/lbasename.c, src/lib/Makefile.am, src/lib/filenames.h,
|
|
src/lib/lrealpath.c, src/jtag.c, configure.ac:
|
|
[ 1916428 ] support runtime-relocatable urjtag (by Mike Frysinger)
|
|
|
|
* include/jtag.h, src/cmd/cmd.c, src/cmd/idcode.c, src/cmd/Makefile.am,
|
|
src/tap/parport/ftdi.c, src/tap/idcode.c, src/tap/Makefile.am, THANKS:
|
|
[ 1933730 ] new "idcode" command (by Uwe Bonnes)
|
|
|
|
2008-04-03 Arnim Laeuger <arniml>
|
|
|
|
[ 1929235 ] Use less global and static variables:
|
|
* src/bus/jopcyc.c, src/bus/zefant-xs3.c: made global variable
|
|
last_address local
|
|
* src/svf/svf.c, src/svf/svf.h: support reentrant parser and scanner
|
|
* src/svf/svf_bison.y: provisions for reentrant parser
|
|
* src/svf/svf_flex.l: made scanner reentrant
|
|
* src/svf/Makefile.am: removed command line options for
|
|
bison and flex
|
|
* configure.ac: require flex 2.5.33 also for SVF scanner
|
|
* doc/UrJTAG.txt: document flex version for SVF scanner
|
|
|
|
2008-04-02 Arnim Laeuger <arniml>
|
|
|
|
[ 1929235 ] Use less global and static variables:
|
|
* src/bsdl/bsdl.c, src/cmd/bsdl.c: use globals from chain_t
|
|
* src/tap/chain.c (chain_alloc): init BSDL globals
|
|
* include/chain.h: added bsdl_globs_t to chain_t
|
|
* include/bsdl.h: defined structure for BSDL globals
|
|
* src/bsdl/Makefile.am, src/bsdl/bsdl_sem.c, src/bsdl/bsdl_flex.l,
|
|
src/bsdl/bsdl_bison.y, src/bsdl/bsdl.c, src/bsdl/bsdl_local.h:
|
|
renamed bsdl.h to bsdl_local.h
|
|
|
|
2008-04-01 Arnim Laeuger <arniml>
|
|
|
|
[ 1887221 ] Add configure switch to disable all cable&parport drivers:
|
|
* doc/UrJTAG.txt: updates for new options and summary reporting
|
|
* src/tap/parport.c: reworked driver referencing based on
|
|
ENABLE_PARPORT_* macros
|
|
* src/tap/cable.c: reworked driver referencing based on
|
|
ENABLE_CABLE_* macros
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): include sources based on
|
|
ENABLE_CABLE_* and ENABLE_PARPORT_* macros
|
|
* src/bus/buses.c: reference bus drivers based on ENABLE_BUS_* macros
|
|
* src/bus/buses.h: sorted sequence of extern declarations
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): include sources based on
|
|
ENABLE_BUS_* macros
|
|
* src/Makefile.am (jtag_LDADD): moved -lcmd to top of list to prevent
|
|
linker error for --enable-cable=jim
|
|
* configure.ac: added switches --enable-bus, --enable-cable and enable-parport
|
|
removed (superseeded) --enable-jim and --enable-ep9307
|
|
|
|
2008-03-26 Kolja Waschk <kawk>
|
|
|
|
* src/flash/amd.c: Fix address shift (Jeff Wittrock)
|
|
|
|
2008-03-15 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* include/jtag.h (jtag_parse_line): Declare.
|
|
(jtag_parse_stream): Declare.
|
|
* src/discovery.c: Move ...
|
|
* src/tap/discovery.c: ... here.
|
|
* src/detect.c: Move ...
|
|
* src/tap/detect.c: ... here.
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Add detect.c and
|
|
discovery.c.
|
|
* src/readmem.c: Move ...
|
|
* src/bus/readmem.c: ... here.
|
|
* src/writemem.c: Move ...
|
|
* src/bus/writemem.c: ... here.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Add readmem.c and
|
|
writemem.c.
|
|
* src/flash.c: Move ...
|
|
* src/flash/flash.c: ... here.
|
|
* src/flash/Makefile.am (libflash_a_SOURCES): Add flash.c.
|
|
* src/jtag.c (get_token, jtag_parse_line, jtag_parse_stream,
|
|
jtag_parse_file): Move to ...
|
|
* src/cmd/parse.c: ... here.
|
|
* src/cmd/Makefile.am (libbus_a_SOURCES): Add parse.c.
|
|
* src/Makefile.am (jtag_SOURCES): Remove detect.c, discovery.c,
|
|
readmem.c, writemem.c and flash.c.
|
|
(jtag_LDADD): Add -ltap and -lflash one more time to resolve
|
|
undefined references.
|
|
|
|
* po/POTFILES.in: Update according to the changes above.
|
|
* po/fr.po, po/rw.po, po/sk.po: Update.
|
|
|
|
2008-03-14 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac: format AC_ARG_ENABLE help with AS_HELP_STRING macro
|
|
|
|
2008-03-13 Kolja Waschk <kawk>
|
|
|
|
* po/POTFILES.in: Sorted and updated to fix [1904952] Missing xpcu_pp.c
|
|
prevents "make urjtag.pot-update"
|
|
* po/fr.po, po/rw.po, po/sk.po: Updated
|
|
|
|
2008-03-10 Arnim Laeuger <arniml>
|
|
|
|
[ 1911429 ] Read TDO data from instruction shift:
|
|
* doc/UrJTAG.txt: removed note about SIR deficiency
|
|
* src/svf/svf.c (svf_sxr): request TDO capture for SIR when command specifies TDO paramters
|
|
* src/tap/chain.c (chain_shift_instructions_mode): use defered shifting and capture TDO
|
|
output when requested
|
|
* src/part/instruction.c (instruction_alloc): allocate tap_register out
|
|
* include/chain.h: parameter capture_output added to chain_shift_instructions_mode()
|
|
* include/instruction.h: tap_register out added
|
|
|
|
2008-03-03 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): fix FT_SetChar() parameters
|
|
* doc/UrJTAG.txt: fix some typos
|
|
|
|
2008-03-01 Arnim <arniml>
|
|
|
|
* src/tap/parport/ftdi.c (ftdi_mpsse_open): rework sequence to fix
|
|
a system that shows similar hangs as reported in
|
|
[ 1904970 ] JTAG operations hang with libftdi
|
|
* src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): align with ftdi.c
|
|
|
|
2008-03-01 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/jlink.c: Added VREF detection and a call to usb_reset()
|
|
when cable initialization failed
|
|
* src/tap/cable/xpc.c: Implemented much faster access method using GPIF
|
|
transfers via vendor request 0xA6. Reportedly works with DLC9 now.
|
|
|
|
2008-02-28 Kolja Waschk <kawk>
|
|
|
|
* doc/UrJTAG.txt: Concretized list of supported USB cables.
|
|
* src/detect.c: Use "include" internally instead of "script", avoid errmsg
|
|
|
|
2008-02-27 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/generic.c (generic_flush_one_by_one): Always flush,
|
|
don't let the queue grow unnecessarily.
|
|
|
|
2008-02-27 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* include/bus.h: Don't include chain.h.
|
|
* include/svf.h: Include chain.h.
|
|
(svf_run): Add a parameter to pass chain.
|
|
* include/cmd.h: Include chain.h.
|
|
(cmd_t): Add a parameter to pass chain for run.
|
|
(cmd_run, cmd_test_cable): Add a parameter to pass chain.
|
|
* include/bus_driver.h: Include chain.h.
|
|
(struct bus_driver): Add a parameter to pass chain for new_bus.
|
|
* include/bsdl.h: Include chain.h
|
|
(bsdl_read_file, bsdl_scan_files): Add a parameter to pass chain.
|
|
* include/jtag.h (chain): Don't declare.
|
|
(jtag_parse_file): Add a parameter to pass chain.
|
|
* src/bsdl/bsdl.c (bsdl_read_file): Add a parameter to pass chain.
|
|
Initialize parser_priv->jtag_ctrl.chain.
|
|
(bsdl_scan_files): Add a parameter to pass chain.
|
|
* src/bsdl/bsdl_sem.c (bsdl_set_instruction_length): Call cmd_run
|
|
with priv->jtag_ctrl.chain.
|
|
* src/bsdl/bsdl.h (struct jtag_ctrl): Add chain field.
|
|
* src/detect.c (detect_parts): Pass chain to bsdl_scan_files
|
|
and cmd_run.
|
|
* src/bus/bf548_ezkit.c (bf548_ezkit_bus_new): Add a parameter to
|
|
pass chain.
|
|
* src/bus/fjmem.c (fjmem_bus_new): Likewise.
|
|
* src/bus/ppc405ep.c (ppc405ep_bus_new): Likewise.
|
|
* src/bus/sh7727.c (sh7727_bus_new): Likewise.
|
|
* src/bus/prototype.c (prototype_bus_new): Likewise.
|
|
* src/bus/sa1110.c (sa1110_bus_new): Likewise.
|
|
* src/bus/ppc440gx_ebc8.c (ppc440gx_ebc8_bus_new): Likewise.
|
|
* src/bus/tx4925.c (tx4925_bus_new): Likewise.
|
|
* src/bus/sh7750r.c (sh7750r_bus_new): Likewise.
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_new): Likewise.
|
|
(pxa27x_bus_new): Likewise.
|
|
* src/bus/bf533_stamp.c (bf533_stamp_bus_new): Likewise.
|
|
* src/bus/bf533_ezkit.c (bf533_ezkit_bus_new): Likewise.
|
|
* src/bus/bf537_stamp.c (bf537_stamp_bus_new): Likewise.
|
|
* src/bus/ixp425.c (ixp425_bus_new): Likewise.
|
|
* src/bus/h7202.c (h7202_bus_new): Likewise.
|
|
* src/bus/zefant-xs3.c (zefant_xs3_bus_new): Likewise.
|
|
* src/bus/bcm1250.c (bcm1250_bus_new): Likewise.
|
|
* src/bus/sharc21065l.c (sharc_21065L_bus_new): Likewise.
|
|
* src/bus/au1500.c (au1500_bus_new): Likewise.
|
|
* src/bus/lh7a400.c (lh7a400_bus_new): Likewise.
|
|
* src/bus/sh7751r.c (sh7751r_bus_new): Likewise.
|
|
* src/bus/mpc5200.c (mpc5200_bus_new): Likewise.
|
|
* src/bus/jopcyc.c (jopcyc_bus_new): Likewise.
|
|
* src/bus/slsup3.c (slsup3_bus_new): Likewise.
|
|
* src/bus/bf561_ezkit.c (bf561_ezkit_bus_new): Likewise.
|
|
* src/bus/s3c4510x.c (s3c4510_bus_new): Likewise.
|
|
* src/bus/ejtag.c (ejtag_bus_new): Likewise.
|
|
* src/bus/mpc824x.c (mpc824x_bus_new): Likewise.
|
|
(mpc824x_bus_write): Change chain to CHAIN.
|
|
* src/svf/svf.c (yyparse): Add a parameter to pass chain. And update
|
|
all call sites.
|
|
(svf_force_reset_state): Likewise.
|
|
(svf_goto_state): Likewise.
|
|
(svf_frequency): Likewise.
|
|
(svf_runtest): Likewise.
|
|
(svf_state): Likewise.
|
|
(svf_sxr): Likewise.
|
|
(svf_trst): Likewsie.
|
|
(svf_run): Likewise.
|
|
* src/svf/svf_bison.y (yyerror): Update declaration and call sites.
|
|
(chain): %parse-param.
|
|
* src/svf/svf.h: Include chain.h and update function declarations.
|
|
* src/cmd/endian.c (cmd_endian_run): Add a parameter to pass chain.
|
|
And update all call sites.
|
|
* src/cmd/frequency.c (cmd_frequency_run): Likewise.
|
|
* src/cmd/part.c (cmd_part_run): Likewise.
|
|
* src/cmd/salias.c (cmd_salias_run): Likewise.
|
|
* src/cmd/instruction.c (cmd_instruction_run): Likewise.
|
|
* src/cmd/quit.c (cmd_quit_run): Likewise.
|
|
* src/cmd/register.c (cmd_register_run): Likewise.
|
|
* src/cmd/debug.c (cmd_debug_run): Likewise.
|
|
* src/cmd/flashmem.c (cmd_flashmem_run): Likewise.
|
|
* src/cmd/svf.c (cmd_svf_run): Likewise.
|
|
* src/cmd/peekpoke.c (cmd_peek_run): Likewise.
|
|
(cmd_poke_run): Likewise.
|
|
* src/cmd/cmd.c (cmd_test_cable): Likewise.
|
|
(cmd_run): Likewise.
|
|
* src/cmd/dr.c (cmd_dr_run): Likewise.
|
|
* src/cmd/cable.c (cmd_cable_run): Likewise.
|
|
* src/cmd/shell.c (cmd_shell_run): Likewise.
|
|
* src/cmd/discovery.c (cmd_discovery_run): Likewise.
|
|
* src/cmd/detect.c (cmd_detect_run): Likewise.
|
|
* src/cmd/readmem.c (cmd_readmem_run): Likewise.
|
|
* src/cmd/signal.c (cmd_signal_run): Likewise.
|
|
* src/cmd/shift.c (cmd_shift_run): Likewise.
|
|
* src/cmd/initbus.c (cmd_initbus_run): Likewise.
|
|
* src/cmd/eraseflash.c (cmd_eraseflash_run): Likewise.
|
|
* src/cmd/bit.c (cmd_bit_run): Likewise.
|
|
* src/cmd/get.c (cmd_get_run): Likewise.
|
|
* src/cmd/test.c (cmd_test_run): Likewise.
|
|
* src/cmd/reset.c (cmd_reset_run): Likewise.
|
|
* src/cmd/include.c (cmd_include_or_script_run): Likewise.
|
|
(cmd_include_run): Likewise.
|
|
(cmd_script_run): Likewise.
|
|
* src/cmd/bsdl.c (cmd_bsdl_run): Likewise.
|
|
* src/cmd/scan.c (cmd_scan_run): Likewise.
|
|
* src/cmd/detectflash.c (cmd_detectflash_run): Likewise.
|
|
* src/cmd/help.c (cmd_help_run): Likewise.
|
|
* src/cmd/writemem.c (cmd_writemem_run): Likewise.
|
|
* src/cmd/bus.c (cmd_bus_run): Likewise.
|
|
* src/cmd/set.c (cmd_set_run): Likewise.
|
|
* src/cmd/print.c (cmd_print_run): Likewise.
|
|
* src/jtag.c (chain): Don't define.
|
|
(jtag_parse_line): Add a parameter to pass chain.
|
|
And update all call sites.
|
|
(jtag_readline_multiple_commands_support): Likewise.
|
|
(jtag_readline_loop): Likewise.
|
|
(jtag_parse_stream): Likewise.
|
|
(jtag_parse_file): Likewise.
|
|
(jtag_parse_rc): Likewise.
|
|
(cleanup): Likewise.
|
|
(main): Define a local chain.
|
|
|
|
2008-02-26 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c (send_and_receive): loopback_off moved to ftdi.c/ftd2xx.c
|
|
* src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): set TCK, loopback_off, reset, purge
|
|
* src/tap/parport/ftdi.c (ftdi_mpsse_open): set TCK, loopback_off, reset, purge
|
|
|
|
2008-02-24 Mike Frysinger <vapier>
|
|
|
|
* src/jtag.c: allow people to disable startup message (1901877),
|
|
quit upon EOF (1901880)
|
|
|
|
2008-02-25 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/fjmem.c (fjmem_bus_new): accept 'len' parameter to suppress
|
|
data register length detection
|
|
|
|
2008-02-25 Kolja Waschk <kawk>
|
|
|
|
* include/usbconn/libusb.h, src/tap/cable/jlink.c: J-Link driver
|
|
doesn't use global variables anymore
|
|
|
|
2008-02-25 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bus/buses.c (bus_drivers): bf548_ezkit_bus.
|
|
* src/bus/buses.h: Declare bf548_ezkit_bus.
|
|
|
|
* include/flash/cfi.h (MAJOR_VERSION_OFFSET): New macro.
|
|
(MAJOR_VERSION_OFFSET): New macro.
|
|
(MINOR_VERSION_OFFSET): New macro.
|
|
(ADDRESS_SENSITIVE_UNLOCK_OFFSET): New macro.
|
|
(ERASE_SUSPEND_OFFSET): New macro.
|
|
(SECTOR_PROTECT_OFFSET): New macro.
|
|
(SECTOR_TEMPORARY_UNPROTECT_OFFSET): New macro.
|
|
(SECTOR_PROTECT_SCHEME_OFFSET): New macro.
|
|
(SIMULTANEOUS_OPERATION_OFFSET): New macro.
|
|
(BURST_MODE_TYPE_OFFSET): New macro.
|
|
(PAGE_MODE_TYPE_OFFSET): New macro.
|
|
(ACC_MIN_OFFSET): New macro.
|
|
(ACC_MAX_OFFSET): New macro.
|
|
(TOP_BOTTOM_SECTOR_FLAG_OFFSET): New macro.
|
|
(PROGRAM_SUSPEND_OFFSET): New macro.
|
|
(UNLOCK_BYPASS_OFFSET): New macro.
|
|
(SECSI_SECTOR_SIZE_OFFSET): New macro.
|
|
(EMBEDDED_HWRST_TIMEOUT_MAX_OFFSET): New macro.
|
|
(NON_EMBEDDED_HWRST_TIMEOUT_MAX_OFFSET): New macro.
|
|
(ERASE_SUSPEND_TIMEOUT_MAX_OFFSET): New macro.
|
|
(PROGRAM_SUSPEND_TIMEOUT_MAX_OFFSET): New macro.
|
|
(BANK_ORGANIZATION_OFFSET): New macro.
|
|
(BANK_REGION_INFO_OFFSET): New macro.
|
|
(struct amd_pri_extened_query_structure): Define.
|
|
(amd_pri_extened_query_structure_t): Typedef.
|
|
* src/flash/cfi.c (cfi_array_free): Free primary vendor table.
|
|
(cfi_detect): Detect AMD CFI primary vendor-specific extended
|
|
query table. Reverse the order of erase block region information
|
|
for top boot devices.
|
|
* src/flash/detectflash.c (detectflash): Print out information
|
|
of AMD CFI primary vendor-specific extended query table.
|
|
|
|
2008-02-24 Kolja Waschk <kawk>
|
|
|
|
* include/cable.h, include/usbconn.h, include/usbconn/libusb.h,
|
|
src/tap/cable.c, src/tap/usbconn/libusb.c, src/tap/parport.c,
|
|
src/tap/usbconn.c, src/tap/Makefile.am: Merged code from usb_abstraction
|
|
branch, adding a "usbconn" link driver (similar to the existing
|
|
parport link driver) for USB cables.
|
|
|
|
* src/tap/cable/generic_parport.c, src/tap/cable/generic_parport.h,
|
|
src/tap/cable/generic_usbconn.h, src/tap/cable/generic_usbconn.c,
|
|
src/tap/cable/generic.c, src/tap/cable/generic.h: Separated link-specific
|
|
code from generic.c into addition source files for parport and usbconn
|
|
|
|
* src/tap/cable/wiggler.c, src/tap/cable/arcom.c, src/tap/cable/mpcbdm.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/jlink.c, src/tap/cable/ea253.c,
|
|
src/tap/cable/vision_ep9307.c, src/tap/cable/triton.c, src/tap/cable/ei012.c,
|
|
src/tap/cable/byteblaster.c, src/tap/cable/wiggler2.c, src/tap/cable/dlc5.c,
|
|
src/tap/cable/ft2232.c, src/tap/cable/keithkoep.c, src/tap/cable/lattice.c:
|
|
Small modifications to adapt to the changes in cable.h and generic.h
|
|
|
|
* src/tap/cable/xpc.c, src/tap/parport/xpcu_pp.c, src/tap/parport/xpcu_common.c:
|
|
Xilinx Platform Cable USB driver now based on usbconn link driver
|
|
|
|
* src/tap/cable/jlink.c: New driver for Segger J-Link, Atmel SAM-ICE etc.
|
|
based on usbconn link driver
|
|
|
|
* doc/UrJTAG.txt: Added section about link drivers
|
|
|
|
2008-02-24 Eugene Boldenkov <eugene_b>
|
|
|
|
* src/bus/mpc824x.c: Add 32-bit bus support (1900847)
|
|
|
|
2008-02-24 Mike Frysinger <vapier>
|
|
|
|
* configure.ac: Fix building out of tree (1899908), only use libusb flags
|
|
as needed (1899930), provide flag about wchar.h presence (1899922)
|
|
* src/cmd/print.c: Fix dependency on wchar.h (1899922)
|
|
|
|
2008-02-23 Arnim Laeuger <arniml>
|
|
|
|
* extra/fjmem/README: new file
|
|
* doc/UrJTAG.txt: mention fjmem driver, document bus driver internals
|
|
* src/svf/Makefile.am (svf_flex.o svf.o): fix dependencies to svf_bison.h
|
|
* src/bsdl/Makefile.am (bsdl_flex.o bsdl_sem.o): fix dependencies to bsdl_bison.h
|
|
-> resolves [ 1899911 ]
|
|
* src/tap/cable/ft2232.c (send_and_receive): only flush if not TO_OUTPUT
|
|
* src/tap/chain.c (chain_shift_data_registers_mode): flush TO_OUTPUT instead
|
|
of CONSERVATIVELY
|
|
* src/tap/cable.c (cable_flush), include/cable.h (enum): removed CONSERVATIVELY
|
|
* configure.ac: conservative-flush removed
|
|
|
|
2008-02-21 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/parport/ftdi.c (ftdi_mpsse_open): set latency timer to 16ms
|
|
* src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): set latency timer to 16ms
|
|
* src/tap/cable/ft2232.c (send_and_receive): issue SEND_IMMEDIATE command
|
|
when receive bytes were scheduled
|
|
* src/bsdl/bsdl_bison.y, src/bsdl/bsdl.h, src/bsdl/bsdl_flex.l, src/bsdl/bsdl.c:
|
|
push mode and debug through init tree to avoid error message from scanner
|
|
in simple test mode.
|
|
* src/bus/fjmem.c: merged branches/jmem to trunk
|
|
-> added fjmem bus driver
|
|
|
|
2008-02-20 Arnim Laeuger <arniml>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): added bsdl/STD_1149_1_2001
|
|
|
|
2008-02-20 Kolja Waschk <kawk>
|
|
|
|
Version 0.8 released.
|
|
|
|
2008-02-20 Kolja Waschk <kawk>
|
|
|
|
* po/fr.po, po/sk.po, po/rw.po, POTFILES.in: Regenerated or updated
|
|
|
|
2008-02-19 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_flex.l (bsdl_flex_set_bin_x), src/bsdl/bsdl.h,
|
|
src/bsdl/bsdl_bison.y (Init_Text): properly support COMPLIANCE_PATTERNS
|
|
-> fix for [ 1896382 ]
|
|
|
|
2008-02-18 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl.c, src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y,
|
|
src/bsdl/bsdl.h, src/bsdl/bsdl_sem.c: support quiet scanning of files
|
|
in include.c
|
|
* src/cmd/include.c (cmd_include_run): check and read file if it's BSDL
|
|
syntax -> [ 1895936 ]
|
|
* doc/UrJTAG.txt: add note about BSDL support in 'include'
|
|
|
|
2008-02-18 Kolja Waschk <kawk>
|
|
|
|
* doc/UrJTAG.txt: How to use initbus (and ejtag/prototype bus driver)
|
|
and some other smaller updates in the "commands" section. Also
|
|
added note about unsupported spiflash* commands, and about now
|
|
obsolete script command (see below)
|
|
* Merged src/script.c into src/include.c. The command looks for the
|
|
specified file in the repository if it's neither an absolute path
|
|
nor begins with ./ or ../, otherwise it uses the filename as is.
|
|
When called as "script", the command behaves as before but emits
|
|
a warning that "include" should be used in future.
|
|
|
|
2008-02-17 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac: check for pre-generated src/svf/svf_flex.c
|
|
-> second part of [ 1895353 ]
|
|
* src/bsdl/Makefile.am (noinst_HEADERS): bsdl_sysdep.h added for proper
|
|
release packing -> first part of [ 1895353 ]
|
|
|
|
2008-02-17 Kolja Waschk <kawk>
|
|
|
|
* doc/UrJTAG.txt: How to use USB cables. THANKS: some additions
|
|
* include/Makefile.am: Add jim.h and jim/some_cpu.h headers for distr.
|
|
|
|
2008-02-16 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_flush): fix inconsistency of TDO caching
|
|
in ft2232_flush()
|
|
* THANKS: to the original SVF and BSDL parser programmers
|
|
* src/tap/cable/ft2232.c (ft2232_generic_init, ft2232_jtagkey_init, ft2232_armusbocd_init):
|
|
initialize mpsse frequency via ft2232_set_frequency()
|
|
|
|
2008-02-16 Kolja Waschk <kawk>
|
|
|
|
* src/jtag.c, src/tap/chain.c, include/chain.h: Always flush immediately
|
|
after each command when used interactively
|
|
* src/cmd/scan.c, src/cmd/Makefile.am, src/cmd/cmd.c: Implemented basic
|
|
boundary "scan" command to detect changes on input pins; tested with
|
|
an (completely erased) Actel ProASIC3 A3P125
|
|
* src/svf/svf.c: Small fix for computation of run_count from min_time
|
|
* doc/UrJTAG.txt: Updated doc about building with FTD2XX in Cygwin
|
|
* src/tap/cable.c, include/cable.h, src/tap/cable/*.c (all drivers):
|
|
moved cable_set_frequency functionality from cable.c to the cable
|
|
drivers, to fix [ 1836319 ] Delay loop calibration takes ages
|
|
* src/tap/cable.c: Include ftdi-based cable drivers if either libftdi or
|
|
FTDI's FTD2XX (CDM) drivers are present (--with-ftd2xx)
|
|
* src/flash/Makefile.am, src/flash/jedec_exp.c, src/flash/detectflash.c,
|
|
configure.ac: Experimental new code for flash detection, to be enabled
|
|
during configuration with --enable-jedec-exp (disabled by default)
|
|
* src/bus/s3c4510x.c: disable debug output (was enabled in 929..), do a
|
|
chain_shift_data_registers before trying to read b0size (fixes the
|
|
old problem of B0SIZE unknown, needed for proper flash detection)
|
|
* include/register.h, src/tap/register.c, src/discovery.c: report if tdo
|
|
seems to be stuck during detect_register_size (ie. "detect").
|
|
|
|
2008-02-14 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable.c (cable_flush), src/tap/chain.c (chain_shift_data_registers_mode),
|
|
include/cable.h, configure.ac: follow conservative flush strategy for transfers
|
|
without output capture (if not disabled via configure --disable-conservative-flush)
|
|
|
|
2008-02-14 Kolja Waschk <kawk>
|
|
|
|
* src/tap/chain.c: Enabled the new^2 implementation in tap_shift_register
|
|
(which was implemented 2008-02-03 but not proven (now it is...))
|
|
|
|
2008-02-14 Jie Zhang <jie.zhang@analog.com>
|
|
|
|
* src/bus/bf537_stamp.c: New.
|
|
* src/bus/bf548_ezkit.c: New.
|
|
* src/bus/bf561_ezkit.c: New.
|
|
* src/bus/buses.c (bus_drivers): Add bf537_stamp_bus,
|
|
bf537_ezkit_bus, and bf561_ezkit_bus.
|
|
* src/bus/buses.h: Declare bf537_stamp_bus, bf537_ezkit_bus,
|
|
and bf561_ezkit_bus.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Add bf537_stamp.c,
|
|
bf548_ezkit.c, and bf561_ezkit.c.
|
|
* data/analog/bf533/STEPPINGS: Add stepping 4.
|
|
* data/analog/bf537/bf537: New.
|
|
* data/analog/bf537/STEPPINGS: New.
|
|
* data/analog/bf549/bf549: New.
|
|
* data/analog/bf549/STEPPINGS: New.
|
|
* data/analog/bf561/bf561: New.
|
|
* data/analog/bf561/STEPPINGS: New.
|
|
* data/analog/PARTS: Add bf537, bf549, and bf561.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Add
|
|
analog/bf537/STEPPINGS, analog/bf537/bf537,
|
|
analog/bf549/STEPPINGS, analog/bf549/bf549,
|
|
and analog/bf561/STEPPINGS, analog/bf561/bf561.
|
|
|
|
2008-02-13 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: implemented control of TRST
|
|
second step of
|
|
[ 1891845 ] Add support for TRST/SRST/LEDs to FT2232 cable driver
|
|
|
|
2008-02-12 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: statically set GPIO high byte with product-specific values
|
|
first step of
|
|
[ 1891845 ] Add support for TRST/SRST/LEDs to FT2232 cable driver
|
|
|
|
2008-02-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_bison.y (Store_Text): removed function Make_String()
|
|
the QUOTED_STRING is directly copied to buffer_for_switch
|
|
* src/bsdl/bsdl.h: memeber String_Val of parser_priv obseleted
|
|
|
|
2008-02-10 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_generic_init, ft2232_jtagkey_init)
|
|
(ft2232_armusbocd_init, ft2232_transfer_schedule): store low byte value and direction
|
|
information in param structure to enable "Set Data Bits Low Byte" commands in
|
|
non pod-specific functions.
|
|
|
|
2008-02-10 Kolja Waschk <kawk>
|
|
|
|
* acinclude.m4, configure.ac: Use local copy of AC_PROG_SED macro (renamed
|
|
to ACI_PROG_SED) maintain compatibility with older autoconf; fixes
|
|
[1890192] - autogen.sh fails on AC_PROG_SED
|
|
* include/cable.h, src/tap/cable/usbblaster.c, src/tap/cable/generic.c,
|
|
src/tap/cable/generic.h, src/tap/cable/ft2232.c, src/tap/cable.c,
|
|
doc/UrJTAG.txt: Extended cable_flush() to take one extra argument
|
|
regarding the amount of items to flush (see UrJTAG.txt for doc),
|
|
* cable.c: possible fix and optional more verbose output (#ifdef VERBOSE)
|
|
for tracking down 1884952 Internal error (queue full)
|
|
|
|
2008-02-09 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_transfer_schedule): ensure max number of bytes for
|
|
a single byte operation
|
|
* src/svf/svf.c (svf_sxr): avoid output capture in case TDO is not specified for SDR
|
|
|
|
2008-02-07 Kolja Waschk <kawk>
|
|
|
|
* src/jtag.c, doc/jtag.1: Fix dropthrough to caller if -n was given
|
|
(fixes [1887179] reported by A.Dyer), add command line option "-i"
|
|
to run interactive mode even after executing commands from files
|
|
|
|
2008-02-07 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_connect): check parport driver setting
|
|
and set maxrecv accordingly
|
|
(send_and_receive): fix problem with send suspend detection
|
|
* src/tap/parport/ftdi.c (ftdi_mpsse_open): decreased latency timer
|
|
(ftdi_flush_output): return error code from ftdi_write_data
|
|
* src/tap/parport/ftd2xx.c (ftd2xx_mpsse_open): decreased latency timer
|
|
|
|
2008-02-05 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c: massive rewrite to support deferred transfers
|
|
initial version with clean queue handling
|
|
|
|
2008-02-05 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable.c: cable_queue_add_item didn't always correct q->next_free,
|
|
and a memory leak in cable_defer_transfer was fixed [1884952].
|
|
|
|
2008-02-04 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/ft2232.c (ft2232_flush): rework flush implementation to benefit from
|
|
queued deferred transfers
|
|
|
|
2008-02-04 Kolja Waschk <kawk>
|
|
|
|
* configure.ac, src/tap/parport/xpcu_common.c, src/tap/parport_xpcu_pp.c,
|
|
doc/UrJTAG.txt: Minor fixes regarding bug [1875234] "Can't compile
|
|
UrJTAG with libusb on Cygwin"
|
|
* src/svf/svf.c: define SA_ONESHOT SA_RESETHAND, fixes bug [1875235]
|
|
(On older Cygwin, SA_ONESHOT isn't known)
|
|
|
|
2008-02-03 Kolja Waschk <kawk>
|
|
|
|
* src/flash/amd.c: Not only bus width but also device geometry affects
|
|
the address shift ([1869650] Improve flash detection and support)
|
|
* src/tap/tap.c, src/tap/chain.c: Split tap_shift_register into two
|
|
halves, one that queues transfers, another that picks up the results.
|
|
([1832990] Speed improvements for USB cables) esp. for long chains
|
|
|
|
2008-02-02 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl.h, src/bsdl/bsdl_flex.l: convert filename to uppercase
|
|
* src/bsdl/bsdl_sem.c (create_register): don't create a new register if it's already there
|
|
* data/bsdl/STD_1149_1_2001: dummy file for 2001 standard added
|
|
* src/cmd/print.c (cmd_print_run): accept longer data register name
|
|
* include/data_register.h (MAXLEN_DATA_REGISTER): increased to 32 for some BSDL files
|
|
* src/flash/amd.c (amdstatus): increase timeout count to address
|
|
[ 1882111 ] Timeout in amdstatus() too small
|
|
|
|
2008-02-02 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable.c: Automatically resize JTAG activity queue if necessary
|
|
* doc/UrJTAG.txt: New section about current cable driver internals
|
|
|
|
2008-02-01 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/parport/ftd2xx.c (ftd2xx_pre_connect): fix compiler warning
|
|
* src/tap/cable/ft2232.c: cleanup
|
|
(ft2232_usbcable_help): mention ftd2xx-mpsse in cable help
|
|
|
|
2008-02-01 Kolja Waschk <kawk>
|
|
|
|
* include/cable.h, include/chain.h, src/tap/chain.c, src/tap/tap.c,
|
|
src/tap/cable/wiggler.c, src/tap/cable/arcom.c, src/tap/cable/mpcbdm.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/generic.c,
|
|
src/tap/cable/vision_ep9307.c, src/tap/cable/ea253.c,
|
|
src/tap/cable/triton.c, src/tap/cable/jim.c, src/tap/cable/byteblaster.c,
|
|
src/tap/cable/ei012.c, src/tap/cable/generic.h, src/tap/cable/ft2232.c,
|
|
src/tap/cable/wiggler2.c, src/tap/cable/keithkoep.c,
|
|
src/tap/cable/lattice.c, src/tap/cable/dlc5.c, src/tap/cable/xpc.c,
|
|
src/tap/cable.c: New functions to queue "deferred" JTAG activity.
|
|
New code in cable drivers to flush the activity queue, both generic
|
|
(for parport-based and new drivers) and optimized implementations
|
|
for FT2232-based cables (by Arnim Laeuger) and USB-Blaster (by me).
|
|
Result is a vast speed improvement at least for FT2232; this
|
|
implements [ 1832990 ] Speed improvements for USB cables
|
|
|
|
2008-01-30 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/tap.c (tap_reset): set instructions of all parts to BYPASS, fix
|
|
[ 1873260 ] Command 'reset' does not reset internal states
|
|
* src/part/part.c (parts_set_instruction): catch NULL pointer
|
|
|
|
2008-01-25 Kolja Waschk <kawk>
|
|
|
|
* include/jim.h, src/jim/tap.c, intel_28f800b3.c, Makefile.am,
|
|
some_cpu.c: Code skeleton and alloc/free calls for actual parts
|
|
connected to JIM's some_cpu
|
|
|
|
2008-01-24 Kolja Waschk <kawk>
|
|
|
|
* tap/cable/ft2232.c, tap/parport/ftdi.c, tap/cable.c: added support
|
|
for Amontec JTAGkey USB cable (submitted by Laurent Gauch - Amontec)
|
|
|
|
2008-01-22 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_flex.l, src/bsdl/bsdl_bison.y,
|
|
data/bsdl/STD_1149_1_1990, data/bsdl/STD_1149_1_1994:
|
|
update header with link to source
|
|
|
|
2008-01-21 Kolja Waschk <kawk>
|
|
|
|
* New JTAG declarations for MPC5241 (from kurobox.com, enh. 1869671)
|
|
|
|
2008-01-21 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/*: use gettext for message strings, removed trailing whitespace
|
|
|
|
2008-01-20 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c, src/bsdl/bsdl.h:
|
|
support multiple port names in one port definition
|
|
* src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c, src/bsdl/bsdl.h:
|
|
handle vectored ports correctly, part 1 of fix for
|
|
[ 1875737 ] Syntax errors/Port index warning parsing ATMEL BSDL files
|
|
* src/bsdl/bsdl_bison.y, src/bsdl/bsdl_sem.c, src/bsdl/bsdl_flex.l:
|
|
support OBSERVE_ONLY attribute in cell description (like input attribute)
|
|
part 2 of fix for
|
|
[ 1875737 ] Syntax errors/Port index warning parsing ATMEL BSDL files
|
|
|
|
2008-01-20 Kolja Waschk <kawk>
|
|
|
|
* src/jim/some_cpu.c, src/jim/some_cpu.bsd: Added BSDL file for some_cpu
|
|
* src/jim/some_cpu.c, src/jim/some_cpu.bsd, README.jim: JIM can now be
|
|
accessed using the prototype bus driver and displays the given address,
|
|
data and enable signals; example script in README.jim
|
|
* src_jim/tap.c: Fixed TDI shift-in
|
|
|
|
2008-01-19 Kolja Waschk <kawk>
|
|
|
|
* ChangeLog: whitespace cosmetics
|
|
* Makefile.am, configure.ac, jim/tap.c, jim/Makefile.am, jim/README.jim,
|
|
tap/cable/jim.c, tap/cable.c, tap/Makefile.am, jim/some_cpu.c,
|
|
include/jim.h, include/jim/some_cpu.h: JTAG target simulator "JIM"
|
|
and a "jim" cable driver to "connect" to it; detection already works.
|
|
|
|
2008-01-18 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac: restructured the test logic for bison error locations and
|
|
the BSDL subsystem [ 1873515 ] BSDL part doesn't compile under Cygwin
|
|
|
|
2008-01-18 Kolja Waschk <kawk>
|
|
|
|
* Moved the code from libbrux/ subdirectory into appropriate locations in
|
|
our src/ subdirectory (Enhancement 1873220):
|
|
|
|
libbrux/cmd/help.c -> src/cmd/help.c
|
|
libbrux/cmd/quit.c -> src/cmd/quit.c
|
|
libbrux/cmd/cmd.c + src/cmd.c -> src/cmd/cmd.c
|
|
libbrux/cmd/cmd_detectflash.c -> src/cmd/detectflash.c
|
|
libbrux/flash + Makefile.am -> src/flash/
|
|
|
|
* Merged the header files from openwince "include" package, which were
|
|
previously moved in inclow/, into our final include/ directory, omitting
|
|
all the files that aren't actually used by UrJTAG (Enhancement 1873220):
|
|
|
|
common.h -> n/a (use bitmask.h!)
|
|
openwince.h (asm/C detection) -> n/a (use #ifdef __ASSEMBLY__)
|
|
openwince.h (bitmasks) -> bitmask.h
|
|
brux/cmd.h + cmd.h -> cmd.h
|
|
brux/cfi.h + brux/flash.h+flash.h -> flash.h
|
|
brux/bus.h -> bus_driver.h
|
|
std/mic.h -> flash/mic.h
|
|
device/flash/cfi.h -> flash/cfi.h
|
|
device/flash/intel.h -> flash/intel.h
|
|
arm/pxa2x0/mc.h -> src/bus/pxa2x0_mc.h
|
|
|
|
2008-01-17 Kolja Waschk <kawk>
|
|
|
|
* UrJTAG.txt: Updates regarding Cygwin ioperm package and readline library
|
|
* src/jtag.c: Without readline library, informative output often
|
|
was printed after prompt, not before
|
|
* src/bus/s3c4510x.c: Address alignment on A0..Ax lines changes dynamically
|
|
with bus width
|
|
|
|
2008-01-16 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/prototype.c (prototype_bus_new): properly calculate the address
|
|
shift based on the current bus width
|
|
|
|
2008-01-15 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/prototype.c (prototype_bus_new): parameter amode added
|
|
|
|
2008-01-11 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/prototype.c: added
|
|
|
|
2008-01-09 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/h7202.c (h7202_bus_new): API extension
|
|
|
|
2008-01-08 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/prototype.c: new prototype bus driver (Detrick Martin)
|
|
* src/bus/zefant-xs3.c (zefant_xs3_bus_new): API extension: cmd_params for new_bus()
|
|
* src/bus/sharc21065l.c (sharc_21065L_bus_new): API extension
|
|
* src/bus/jopcyc.c (jopcyc_bus_new): API extension
|
|
* src/bus/tx4925.c (tx4925_bus_new): API extension
|
|
* src/bus/slsup3.c (slsup3_bus_new): API extension
|
|
* src/bus/sh7751r.c (sh7751r_bus_new): API extension
|
|
* src/bus/sh7750r.c (sh7750r_bus_new): API extension
|
|
* src/bus/sh7727.c (sh7727_bus_new): API extension
|
|
* src/bus/s3c4510x.c (s3c4510_bus_new): API extension
|
|
* src/bus/sa1110.c (sa1110_bus_new): API extension
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_new): API extension
|
|
(pxa27x_bus_new): API extension
|
|
* src/bus/ppc405ep.c (ppc405ep_bus_new): API extension
|
|
* src/bus/ppc440gx_ebc8.c (ppc440gx_ebc8_bus_new): API extension
|
|
* src/bus/mpc5200.c (mpc5200_bus_new): API extension
|
|
* src/bus/mpc824x.c (mpc824x_bus_new): API extension
|
|
* src/bus/lh7a400.c (lh7a400_bus_new): API extension
|
|
* src/bus/ixp425.c (ixp425_bus_new): API extension
|
|
* src/bus/bf533_ezkit.c (bf533_ezkit_bus_new): API extension
|
|
* src/bus/bf533_stamp.c (bf533_stamp_bus_new): API extension
|
|
* src/bus/ejtag.c (ejtag_bus_new): API extension
|
|
* src/bus/bcm1250.c (bcm1250_bus_new): API extension
|
|
* src/bus/au1500.c (au1500_bus_new): API extension
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): added prototype.c
|
|
* src/bus/buses.c: added prototype_bus (Detrick Martin)
|
|
* src/cmd/initbus.c (cmd_initbus_run): hand down command parameters to bus_new()
|
|
|
|
2008-01-06 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/cable/wiggler.c (wiggler_connect): enable bit<->pin mapping from parameter string
|
|
* src/tap/cable/wiggler.c: make std_wgl_map static
|
|
|
|
2007-12-31 Arnim Laeuger <arniml>
|
|
|
|
* src/bsdl/Makefile.am (noinst_HEADERS): move headers to noinst_HEADERS
|
|
* include/Makefile.am (noinst_HEADERS): add bsdl.h to list of headers
|
|
* src/bsdl/Makefile.am (libbsdl_a_SOURCES): add bsdl.h to list of sources
|
|
|
|
2007-12-30 Arnim Laeuger <arniml>
|
|
|
|
* src/detect.c (detect_parts): call bsdl_scan_file() if configure result indicates inclusion of BSDL subsystem
|
|
* src/cmd/cmd.c: include cmd_svf and cmd_bsdl based on configure result
|
|
* src/Makefile.am (jtag_DEPENDENCIES): link to libsvf.a and libbsdl.a based on configure result
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): compile svf.c and bsdl.c based on configure result
|
|
* configure.ac: added --enable-svf and --enable-bsdl
|
|
* README.svf: contents moved to doc/UrJTAG.txt, file deleted
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): fixed merge results
|
|
* many files: integration of BSDL parser
|
|
* data/xilinx/PARTS: added xc2v80-fg256,xc2v250-fg256,xc2v1000-fg256
|
|
'[ 1859678 ] jtag support for xilinx xc2v80-fg256, xc2v250, xc2v1000 FPGA' (Alexander Didebulidze)
|
|
* data/altera/ep1c12/ep1c12: CLAMP and HIGHZ instructions activated
|
|
|
|
2007-12-29 Arnim Laeuger <arniml>
|
|
|
|
* data/altera/PARTS: ep2c8 added
|
|
'[ 1859032 ] jtag support for Altera EP2C8' (Hartley Sweeten)
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): ep2c8 files added
|
|
'[ 1859032 ] jtag support for Altera EP2C8' (Hartley Sweeten)
|
|
|
|
2007-12-27 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/print.c (cmd_print_run): applied patch:
|
|
'[ 1858985 ] possible fix to print the signal aliases' (Hartley Sweeten)
|
|
|
|
2007-12-26 Kolja Waschk <kawk>
|
|
|
|
* tap/cable/vision_ep9307.c, tap/cable.c, tap/Makefile.am, configure.ac:
|
|
Integrated first modern (single-file w/o parport) cable driver
|
|
(1858709: EP9307 target specific cable driver, from Hartley Sweeten)
|
|
|
|
2007-12-23 Kolja Waschk <kawk>
|
|
|
|
Version 0.7 released.
|
|
|
|
2007-12-23 Kolja Waschk <kawk>
|
|
|
|
* NEWS: Summarized changes since fork from openwince CVS.
|
|
* configure.ac: Updated copyright information.
|
|
|
|
2007-12-19 Kolja Waschk <kawk>
|
|
|
|
* tap/cable/*, tap/parport/xpcu_common.c, cmd/part.c, cmd/cable.c,
|
|
bus/pxa2x0.c, jtag.c: fix prototypes, include stdlib (thx Hartley)
|
|
* src/cmd/print.c: cast uint64_t to (long long unsigned) for %llu
|
|
|
|
2007-12-18 Kolja Waschk <kawk
|
|
|
|
* configure.ac, src/tap/parport/*.c: include stropts.h only if
|
|
it's available (needed for uClinux and others; thanks Hartley)
|
|
* doc/UrJTAG.txt, src/jtag.txt: Cosmetics, Copyright
|
|
* src/tap/Makefile.am: include cable driver for USB Blaster and
|
|
FT2232-based cables if any of libftdi or ftd2xx is present
|
|
|
|
2007-12-16 Kolja Waschk <kawk>
|
|
|
|
* jtag.c: Don't abort on invalid command line options
|
|
* configure.ac: Reorganized the libusb/libftdi detection.
|
|
* data/MANUFACTURERS: Change 11110000111 code to point to
|
|
"ARM" instead of Sharp to stop misdetection of other
|
|
(non-Sharp) chips which use ARM cores. See Bug 1837991.
|
|
* libbrux/amd/amd_flash.c: Fix for [1851777] segfault when
|
|
running detectflash
|
|
* include/setdevice.h, include/Makefile.am, src/detect.c,
|
|
src/cmd/setdevice.c, src/cmd/cmd.c, src/cmd/Makefile.am,
|
|
src/jtag.c, doc/UrJTAG.txt, libbrux/flash/amd_flash.c,
|
|
libbrux/setdevice.h, libbrux/Makefile.am: Removed code for
|
|
"setdevice" command and added some documentation how to get
|
|
along without it.
|
|
|
|
2007-12-15 Kolja Waschk <kawk>
|
|
|
|
* configure.ac, tap/parport/parport.c, tap/parport/ppi.c,
|
|
tap/parport/direct.c: Adapted openwince patch by Daniel
|
|
O'Connor, [1235990] Add support for FreeBSD's ppi interface
|
|
(closes our copy of that tracker item, 1829585)
|
|
* src/cmd/cable.c, include/cable.h, src/tap/cable/*.c: Add
|
|
help function to every cable; temporarily allow old syntax
|
|
for cable command when used for parallel port cables
|
|
* data/intel/pxa270/STEPPINGS, src/bus/pxa2x0.c: Integrated two
|
|
patches from F. Rysanek, adding C5 stepping of PXA270 and a few
|
|
few functions that resolve the PXA270 address space into the 6
|
|
default nCS windows per 64MB. (Enhancement req. 1849493)
|
|
* cmd/part.c, cmd/setdevice.c, cmd/instruction.c, cmd/svf.c,
|
|
cmd/dr.c, cmd/initbus.c, cmd/test.c, part/part.c, libbrux/cmd/cmd.c,
|
|
libbrux/cmd/help.c: Make command string comparisons case-insensitive
|
|
(fixes 1845811 "Case sensitivity in shell")
|
|
|
|
2007-12-14 Kolja Waschk <kawk>
|
|
|
|
* README, doc/UrJTAG.txt: pointer to http://www.urjtag.org
|
|
* configure.ac, src/Makefile.am, src/tap/parport/ftd2xx.c:
|
|
Changes to allow linking against FTDI FTD2XX in Cygwin, initial
|
|
support for --with-(libftdi|libusb|ftd2xx) configure options
|
|
|
|
2007-12-13 Kolja Waschk <kawk>
|
|
|
|
* configure.ac: Run "svn info" with "-R" to get latest revision
|
|
|
|
2007-12-12 Arnim Laeuger <arniml>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): add missing '\', fixes
|
|
[ 1849477 ] Missing \ in data/Makefile.ac
|
|
|
|
2007-12-09 Kolja Waschk <kawk>
|
|
|
|
* configure.ac: Improve detection of flex version, get Subversion
|
|
revision from 1. svn info, or 2. ChangeLog, or 3. Revision tag,
|
|
auto-detect whether -lrt is needed
|
|
* src/svf/svf_flex.l: derive HAVE_MODERN_FLEX internally
|
|
* src/jtag.c: show version from config.h, compile without readline
|
|
* src/version.awk: not needed; SVN info now available in config.h
|
|
* src/Makefile.am: removed -lrt link and version.h target
|
|
* doc/UrJTAG.txt: Added info about libraries, ioperm, "setdevice" cmd
|
|
|
|
2007-12-08 Kolja Waschk <kawk>
|
|
|
|
* include/Makefile.am, src/Makefile.am, src/svf/Makefile.am
|
|
configure.ac, libbrux/configure.ac: Mention more files to
|
|
ensure that dist tar.gz is complete; prevent installation
|
|
of inclow/ headers during "make install" on top level
|
|
|
|
2007-12-07 Kolja Waschk <kawk>
|
|
|
|
* README: All info moved to doc/UrJTAG.txt
|
|
* README_21065L: Merged into doc/UrJTAG.txt
|
|
* doc/UrJTAG.xml, UrJTAG.txt: converted DocBook to asciidoc
|
|
* COPYING: GPLv2 added
|
|
* AUTHORS: Updated
|
|
* TODO: removed (we're using SourceForge trackers)
|
|
|
|
2007-12-06 Kolja Waschk <kawk>
|
|
|
|
* ChangeLog: Import SVN commit messages from past month
|
|
* THANKS: Added all missing names (that I know of) of the people who
|
|
contributed the patches that have been integrated in the past weeks
|
|
|
|
2007-12-05 Arnim Laeuger <arniml>
|
|
|
|
* src/jtag.c (main): Print build number based on version.h.
|
|
* src/Makefile.am (version.h): Added rules to generate version.h from ChangeLog's revision tag.
|
|
|
|
2007-12-04 07:06 Kolja Waschk <kawk>
|
|
|
|
* include/cable.h, include/parport.h, src/cmd/cable.c,
|
|
src/tap/cable/generic.c, src/tap/cable/generic.h,
|
|
src/tap/parport/direct.c, src/tap/parport/ftd2xx.c,
|
|
src/tap/parport/ftdi.c, src/tap/parport/ppdev.c,
|
|
src/tap/parport/xpcu_pp.c: [1839040] Make "cable" command less
|
|
parport-centric. Changes "cable" command syntax!
|
|
|
|
2007-12-03 12:18 Kolja Waschk <kawk>
|
|
|
|
* ChangeLog: added "Revision" keyword
|
|
|
|
2007-12-02 17:56 Kolja Waschk <kawk>
|
|
|
|
* trunk/include, Makefile.am, configure.ac, inclow: openwince
|
|
"include" package moved into "jtag" (now named "inclow")
|
|
|
|
2007-11-30 07:06 Kolja Waschk <kawk>
|
|
|
|
* README: update fixes [1837364] Install instructions wrong
|
|
|
|
2007-11-28 22:42 Kolja Waschk <kawk>
|
|
|
|
* doc/bsdl2jtag.1, doc/jtag.1: Imported man pages from
|
|
openwince-jtag Debian package (w/permission from p2@debian)
|
|
|
|
2007-11-28 20:20 Kolja Waschk <kawk>
|
|
|
|
* src/jtag.c: [ 1838018 ] "Forbid" to run JTAG tools with suid root
|
|
|
|
2007-11-28 19:43 Kolja Waschk <kawk>
|
|
|
|
* src/jtag.c: [ 1839756 ] (openwince [972637]) add command line
|
|
options to jtag
|
|
|
|
2007-11-28 00:13 Kolja Waschk <kawk>
|
|
|
|
* doc/UrJTAG.xml: Integrated text from Wiki pages from Ralf,
|
|
Incorporated README into UrJTAG.xml
|
|
|
|
2007-11-27 22:06 Kolja Waschk <kawk>
|
|
|
|
* doc/UrJTAG.xml,doc-layout.txt: renamed top-level DocBook XML file
|
|
|
|
2007-11-27 22:05 Kolja Waschk <kawk>
|
|
|
|
* doc/doc-layout.txt, doc/internals.xml: Include license text(s)
|
|
and internals.xml
|
|
|
|
2007-11-27 21:01 Kolja Waschk <kawk>
|
|
|
|
* doc/gpl.dbk, doc/lgpl.dbk: Use version 2, not 3
|
|
|
|
2007-11-27 20:56 Kolja Waschk <kawk>
|
|
|
|
* doc/fdl.xml, doc/gpl.dbk, doc/lgpl.dbk: Added license texts
|
|
(docbook) from www.gnu.org
|
|
|
|
2007-11-26 14:01 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/shell.c: Clean up fix for [1837985] "shell" command
|
|
causes segfault
|
|
|
|
2007-11-25 22:49 Kolja Waschk <kawk>
|
|
|
|
* doc/doc-layout.txt: Converted to DocBook-XSL
|
|
|
|
2007-11-25 14:45 Kolja Waschk <kawk>
|
|
|
|
* doc/doc-layout.txt: Layout draft for new, comprehensive
|
|
documentation...
|
|
|
|
2007-11-25 13:08 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/shell.c: Allow arbitrary number of arguments for "shell"
|
|
command (fix for [1837985] "shell" command causes segfault)
|
|
|
|
2007-11-25 00:02 Arnim Laeuger <arniml>
|
|
|
|
* src/tap/parport/ftd2xx.c, src/tap/parport/ftdi.c: fix for '[
|
|
1836616 ] Segfault/Memory corruption if USB device inaccessible'
|
|
|
|
2007-11-23 19:52 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac, src/svf/Makefile.am, src/svf/svf_bison.y,
|
|
src/svf/svf_flex.l: make SVF parser/lexer backwards compatible to
|
|
pre-2.5.31 flex
|
|
for those the error location feature is skipped in svf_flex.l
|
|
|
|
2007-11-20 20:35 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac, src/cmd/cable.c, src/tap/Makefile.am,
|
|
src/tap/cable/ft2232.c, src/tap/parport.c,
|
|
src/tap/parport/ftd2xx.c, src/tap/parport/ftdi.c: ftd2xx parport
|
|
driver added
|
|
|
|
2007-11-18 13:38 Arnim Laeuger <arniml>
|
|
|
|
* configure.ac: add some messages to show configuration summary, to
|
|
be extended
|
|
|
|
2007-11-17 21:39 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/cable.c: report cable usage for USB & FTDI based cables
|
|
only in case respective support is included
|
|
|
|
2007-11-16 17:50 Arnim Laeuger <arniml>
|
|
|
|
* include/cable.h, include/chain.h, src/cmd/cable.c, src/svf/svf.c,
|
|
src/tap/Makefile.am, src/tap/cable.c, src/tap/cable/arcom.c,
|
|
src/tap/cable/byteblaster.c, src/tap/cable/dlc5.c,
|
|
src/tap/cable/ea253.c, src/tap/cable/ei012.c,
|
|
src/tap/cable/ft2232.c, src/tap/cable/generic.c,
|
|
src/tap/cable/keithkoep.c, src/tap/cable/lattice.c,
|
|
src/tap/cable/mpcbdm.c, src/tap/cable/triton.c,
|
|
src/tap/cable/usbblaster.c, src/tap/cable/wiggler.c,
|
|
src/tap/cable/wiggler2.c, src/tap/cable/xpc.c, src/tap/chain.c,
|
|
src/tap/parport.c, src/tap/parport/ftdi.c, src/tap/tap.c: merged
|
|
changes from /branches/ft2232_eval@770
|
|
this is the initial stable version of the ft2232 cable driver
|
|
|
|
2007-11-13 23:09 Arnim Laeuger <arniml>
|
|
|
|
* src/flash.c: removed obsolete declaration of amd_detect()
|
|
|
|
2007-11-13 08:07 Kolja Waschk <kawk>
|
|
|
|
* configure.ac, src/tap/Makefile.am, src/tap/cable.c: Fix [ 1828368 ]
|
|
Compilation fails without libusb/libftdi
|
|
|
|
2007-11-10 17:17 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am, data/lattice/PARTS,
|
|
data/lattice/lc4128c-tqfp100,
|
|
data/lattice/lc4128c-tqfp100/STEPPINGS,
|
|
data/lattice/lc4128c-tqfp100/lc4128c-tqfp100: [ 1105256 ] jtag
|
|
descriptor for Lattice LC4032V-TQFP100
|
|
|
|
2007-11-10 16:22 Arnim Laeuger <arniml>
|
|
|
|
* README.svf: remove links to openwince
|
|
|
|
2007-11-10 01:15 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/zefant-xs3.c: added Zefant-XS3 bus
|
|
|
|
2007-11-10 00:31 Arnim Laeuger <arniml>
|
|
|
|
* data/xilinx/xc3s1000/fg320, data/xilinx/xc3s1000/fg456,
|
|
data/xilinx/xc3s1000/fg676, data/xilinx/xc3s1000/ft256,
|
|
data/xilinx/xc3s1000/xc3s1000: xc3s1000 kw
|
|
|
|
2007-11-10 00:15 Arnim Laeuger <arniml>
|
|
|
|
* data/Makefile.am, data/xilinx/xc3s1000/STEPPINGS,
|
|
data/xilinx/xc3s1000/fg320, data/xilinx/xc3s1000/fg456,
|
|
data/xilinx/xc3s1000/fg676, data/xilinx/xc3s1000/ft256,
|
|
data/xilinx/xc3s1000/xc3s1000,
|
|
data/xilinx/xc3s1000/xc3s1000_fg320,
|
|
data/xilinx/xc3s1000/xc3s1000_fg456,
|
|
data/xilinx/xc3s1000/xc3s1000_fg676,
|
|
data/xilinx/xc3s1000/xc3s1000_ft256,
|
|
data/xilinx/xc3s1000/xc3s1000l,
|
|
data/xilinx/xc3s1000/xc3s1000l_fg320,
|
|
data/xilinx/xc3s1000/xc3s1000l_fg456,
|
|
data/xilinx/xc3s1000/xc3s1000l_fg676,
|
|
data/xilinx/xc3s1000/xc3s1000l_ft256: unification xc3s1000
|
|
|
|
2007-11-09 22:44 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/bit.c: fixed [ 1828672 ] cmd/bit.c broken
|
|
|
|
2007-11-08 09:44 Kolja Waschk <kawk>
|
|
|
|
* configure.ac, data/Makefile.am, data/xilinx/PARTS,
|
|
data/xilinx/xc2c256-vq100, data/xilinx/xc2c256-vq100/STEPPINGS,
|
|
data/xilinx/xc2c256-vq100/xc2c256-vq100,
|
|
data/xilinx/xc2c64a-vq44, data/xilinx/xc2c64a-vq44/STEPPINGS,
|
|
data/xilinx/xc2c64a-vq44/xc2c64a-vq44, include/Makefile.am,
|
|
include/cable.h, include/xpcu.h, src/cmd/cable.c,
|
|
src/part/data_register.c, src/tap/Makefile.am, src/tap/cable.c,
|
|
src/tap/cable/arcom.c, src/tap/cable/byteblaster.c,
|
|
src/tap/cable/dlc5.c, src/tap/cable/ea253.c,
|
|
src/tap/cable/ei012.c, src/tap/cable/generic.c,
|
|
src/tap/cable/generic.h, src/tap/cable/keithkoep.c,
|
|
src/tap/cable/lattice.c, src/tap/cable/mpcbdm.c,
|
|
src/tap/cable/triton.c, src/tap/cable/usbblaster.c,
|
|
src/tap/cable/wiggler.c, src/tap/cable/wiggler2.c,
|
|
src/tap/cable/xpc.c, src/tap/parport.c, src/tap/parport/ftdi.c,
|
|
src/tap/parport/xpcu_common.c, src/tap/parport/xpcu_pp.c,
|
|
src/tap/tap.c: [ 1479632, 1649637 ] Drivers for Altera USB
|
|
Blaster and Xilinx Platform Cable USB
|
|
|
|
2007-11-08 09:13 Kolja Waschk <kawk>
|
|
|
|
* include/Makefile.am, README, README_21065L, THANKS,
|
|
data/Makefile.am, data/analog/PARTS, data/analog/sharc21065l,
|
|
data/analog/sharc21065l/STEPPINGS,
|
|
data/analog/sharc21065l/sharc21065l, include/setdevice.h,
|
|
libbrux/Makefile.am, libbrux/flash/amd_flash.c,
|
|
libbrux/flash/detectflash.c, libbrux/setdevice.h,
|
|
src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/sharc21065l.c, src/cmd/Makefile.am, src/cmd/cmd.c,
|
|
src/cmd/setdevice.c, src/detect.c, src/flash.c, src/jtag.c:
|
|
[ 1605981 ] JTAG Support for ADSP-21065L Processor (with
|
|
modifications) (Girish G Pai, Lesly A. M, Tony K Nadackal, Shaju Abraham)
|
|
|
|
2007-11-08 07:33 Kolja Waschk <kawk>
|
|
|
|
* data/MANUFACTURERS, data/Makefile.am, data/admtek,
|
|
data/admtek/adm5120, data/admtek/adm5120/adm5120, data/atheros,
|
|
data/atheros/ar2312, data/atheros/ar2312/ar2312, data/brecis,
|
|
data/brecis/PARTS, data/brecis/msp2006,
|
|
data/brecis/msp2006/STEPPINGS, data/brecis/msp2006/msp2006,
|
|
data/hitachi/PARTS, data/hitachi/ar7300,
|
|
data/hitachi/ar7300/STEPPINGS, data/hitachi/ar7300/ar7300,
|
|
data/lexra, data/lexra/PARTS, data/lexra/lx5280,
|
|
data/lexra/lx5280/STEPPINGS, data/lexra/lx5280/lx5280,
|
|
doc/README.ejtag: [ 1429825 ] EJTAG driver (new data files) (Oleg)
|
|
|
|
2007-11-08 07:11 Kolja Waschk <kawk>
|
|
|
|
* src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/ejtag.c, src/tap/parport/ppdev.c: [ 1429825 ] EJTAG
|
|
driver (partial patch - only the bus driver for now) (Oleg)
|
|
|
|
2007-11-07 23:17 Arnim Laeuger <arniml>
|
|
|
|
* src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/h7202.c: [ 1585617 ] support for the Magnachip h7202 cpu
|
|
|
|
2007-11-07 22:43 Arnim Laeuger <arniml>
|
|
|
|
* README.svf: update README.svf
|
|
|
|
2007-11-07 22:21 Arnim Laeuger <arniml>
|
|
|
|
* src/cmd/debug.c, src/cmd/eraseflash.c, src/cmd/peekpoke.c,
|
|
src/cmd/script.c, src/cmd/shell.c, src/cmd/signal.c,
|
|
src/cmd/test.c, src/detect.c, src/jtag.c, src/part/signal.c,
|
|
src/readmem.c, src/svf/svf_bison.y, src/svf/svf_flex.l,
|
|
src/writemem.c: get rid of (most) compiler warnings
|
|
|
|
2007-11-07 09:56 Kolja Waschk <kawk>
|
|
|
|
* include/bssignal.h, include/jtag.h, include/part.h, src/jtag.c:
|
|
Remaining diffs from gumstix repository: Add debug, test and
|
|
shell command, aliases for parts, small fixes.
|
|
|
|
2007-11-07 09:44 Kolja Waschk <kawk>
|
|
|
|
* src/bsdl2jtag.c, src/bus/ppc440gx_ebc8.c, src/cmd/Makefile.am,
|
|
src/cmd/cmd.c, src/cmd/debug.c, src/cmd/part.c, src/cmd/print.c,
|
|
src/cmd/script.c, src/cmd/shell.c, src/cmd/signal.c,
|
|
src/cmd/test.c, src/detect.c, src/part/part.c, src/part/signal.c:
|
|
Remaining diffs from gumstix repository: Add debug, test and
|
|
shell command, aliases for parts, small fixes.
|
|
|
|
2007-11-07 09:09 Kolja Waschk <kawk>
|
|
|
|
* doc/howto_add_support_for_more_flash.txt: [ 1460563 ] How to add
|
|
Support more Flash chip???
|
|
|
|
2007-11-07 09:07 Kolja Waschk <kawk>
|
|
|
|
* src/writemem.c: [ 1249554 ] Writemem command to write to SRAM
|
|
(compile fix)
|
|
|
|
2007-11-07 09:04 Kolja Waschk <kawk>
|
|
|
|
* src/svf/svf_flex.l: [ 1194137 ] better SVF diagnostics (compile
|
|
fix)
|
|
|
|
2007-11-07 09:03 Kolja Waschk <kawk>
|
|
|
|
* src/bus/ppc405ep.c, src/bus/Makefile.am: The 405ep support patch
|
|
_still_ wasn't completely integrated.
|
|
|
|
2007-11-07 08:55 Kolja Waschk <kawk>
|
|
|
|
* Makefile.am: Remove additional lines left over from unsuccessful
|
|
patch before.
|
|
|
|
2007-11-07 08:47 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am, data/xilinx/PARTS, data/xilinx/xc2s300e,
|
|
data/xilinx/xc2s300e/STEPPINGS, data/xilinx/xc2s300e/fg456,
|
|
data/xilinx/xc2s300e/ft256, data/xilinx/xc2s300e/pq208,
|
|
data/xilinx/xc2s300e/xc2s300e: [ 1377859 ] Device description
|
|
files for Xilinx XC2S300E (Spartan-IIE) (Arnim Laeuger)
|
|
|
|
2007-11-07 08:41 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am: Added Xilinx parts XC3S*
|
|
|
|
2007-11-07 08:31 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am: Added Atmel AT91SAM7S files to Makefile.am
|
|
|
|
2007-11-07 08:16 Kolja Waschk <kawk>
|
|
|
|
* data/xilinx/PARTS, data/xilinx/xc18v04pc44,
|
|
data/xilinx/xc18v04pc44/STEPPINGS,
|
|
data/xilinx/xc18v04pc44/xc18v04pc44, data/xilinx/xc2s200e-pq208,
|
|
data/xilinx/xc2s200e-pq208/STEPPINGS,
|
|
data/xilinx/xc2s200e-pq208/xc2s200e-pq208, data/xilinx/xc3s1000,
|
|
data/xilinx/xc3s1000/STEPPINGS, data/xilinx/xc3s1000/xc3s1000,
|
|
data/xilinx/xc3s1000/xc3s1000_fg320,
|
|
data/xilinx/xc3s1000/xc3s1000_fg456,
|
|
data/xilinx/xc3s1000/xc3s1000_fg676,
|
|
data/xilinx/xc3s1000/xc3s1000_ft256,
|
|
data/xilinx/xc3s1000/xc3s1000l,
|
|
data/xilinx/xc3s1000/xc3s1000l_fg320,
|
|
data/xilinx/xc3s1000/xc3s1000l_fg456,
|
|
data/xilinx/xc3s1000/xc3s1000l_fg676,
|
|
data/xilinx/xc3s1000/xc3s1000l_ft256, data/xilinx/xc3s100e_die,
|
|
data/xilinx/xc3s100e_die/STEPPINGS,
|
|
data/xilinx/xc3s100e_die/xc3s100e_die,
|
|
data/xilinx/xc3s100e_die/xc3s100e_pq208,
|
|
data/xilinx/xc3s100e_die/xc3s100e_tq144,
|
|
data/xilinx/xc3s100e_die/xc3s100e_vq100, data/xilinx/xc3s1500,
|
|
data/xilinx/xc3s1500/STEPPINGS, data/xilinx/xc3s1500/xc3s1500,
|
|
data/xilinx/xc3s1500/xc3s1500_fg320,
|
|
data/xilinx/xc3s1500/xc3s1500_fg456,
|
|
data/xilinx/xc3s1500/xc3s1500_fg676,
|
|
data/xilinx/xc3s1500/xc3s1500l,
|
|
data/xilinx/xc3s1500/xc3s1500l_fg320,
|
|
data/xilinx/xc3s1500/xc3s1500l_fg456,
|
|
data/xilinx/xc3s1500/xc3s1500l_fg676, data/xilinx/xc3s200,
|
|
data/xilinx/xc3s200/STEPPINGS, data/xilinx/xc3s200/xc3s200,
|
|
data/xilinx/xc3s200/xc3s200_ft256,
|
|
data/xilinx/xc3s200/xc3s200_pq208,
|
|
data/xilinx/xc3s200/xc3s200_tq144,
|
|
data/xilinx/xc3s200/xc3s200_vq100, data/xilinx/xc3s2000,
|
|
data/xilinx/xc3s2000/STEPPINGS, data/xilinx/xc3s2000/xc3s2000,
|
|
data/xilinx/xc3s2000/xc3s2000_fg456,
|
|
data/xilinx/xc3s2000/xc3s2000_fg676,
|
|
data/xilinx/xc3s2000/xc3s2000_fg900,
|
|
data/xilinx/xc3s2000/xc3s2000l,
|
|
data/xilinx/xc3s2000/xc3s2000l_fg676,
|
|
data/xilinx/xc3s2000/xc3s2000l_fg900, data/xilinx/xc3s400,
|
|
data/xilinx/xc3s400/STEPPINGS, data/xilinx/xc3s400/xc3s400,
|
|
data/xilinx/xc3s400/xc3s400_fg320,
|
|
data/xilinx/xc3s400/xc3s400_fg456,
|
|
data/xilinx/xc3s400/xc3s400_ft256,
|
|
data/xilinx/xc3s400/xc3s400_pq208,
|
|
data/xilinx/xc3s400/xc3s400_tq144, data/xilinx/xc3s4000,
|
|
data/xilinx/xc3s4000/STEPPINGS, data/xilinx/xc3s4000/xc3s4000,
|
|
data/xilinx/xc3s4000/xc3s4000_fg1156,
|
|
data/xilinx/xc3s4000/xc3s4000_fg676,
|
|
data/xilinx/xc3s4000/xc3s4000_fg900,
|
|
data/xilinx/xc3s4000/xc3s4000l,
|
|
data/xilinx/xc3s4000/xc3s4000l_fg1156,
|
|
data/xilinx/xc3s4000/xc3s4000l_fg900, data/xilinx/xc3s50,
|
|
data/xilinx/xc3s50/STEPPINGS, data/xilinx/xc3s50/xc3s50,
|
|
data/xilinx/xc3s50/xc3s50_cp132, data/xilinx/xc3s50/xc3s50_pq208,
|
|
data/xilinx/xc3s50/xc3s50_tq144, data/xilinx/xc3s50/xc3s50_vq100,
|
|
data/xilinx/xc3s5000, data/xilinx/xc3s5000/STEPPINGS,
|
|
data/xilinx/xc3s5000/xc3s5000,
|
|
data/xilinx/xc3s5000/xc3s5000_fg1156,
|
|
data/xilinx/xc3s5000/xc3s5000_fg900, data/xilinx/xc3s500e_fg320,
|
|
data/xilinx/xc3s500e_fg320/STEPPINGS,
|
|
data/xilinx/xc3s500e_fg320/xc3s500e_fg320,
|
|
data/xilinx/xc3s500e_fg320/xc3s500e_ft256,
|
|
data/xilinx/xc3s500e_fg320/xc3s500e_pq208,
|
|
data/xilinx/xc9572xl_vq44, data/xilinx/xc9572xl_vq44/STEPPINGS,
|
|
data/xilinx/xc9572xl_vq44/xc9572xl_vq44, data/xilinx/xcf04s,
|
|
data/xilinx/xcf04s/STEPPINGS, data/xilinx/xcf04s/xcf04s: Added
|
|
Xilinx XC3S* parts and others from gumstix repository
|
|
|
|
2007-11-07 08:10 Kolja Waschk <kawk>
|
|
|
|
* data/atmel/PARTS, data/atmel/at91sam7s256,
|
|
data/atmel/at91sam7s256/STEPPINGS,
|
|
data/atmel/at91sam7s256/at91sam7s_tq48v0,
|
|
data/atmel/at91sam7s256/at91sam7s_tq64v0: Added AT91SAM7S256 data
|
|
from gumstix repository
|
|
|
|
2007-11-06 21:39 Kolja Waschk <kawk>
|
|
|
|
* src/bus/Makefile.am, src/bus/au1500.c, src/bus/bcm1250.c,
|
|
src/bus/buses.c, src/bus/buses.h, src/bus/jopcyc.c,
|
|
src/bus/lh7a400.c, src/bus/mpc5200.c, src/bus/ppc440gx_ebc8.c,
|
|
src/bus/slsup3.c, src/bus/tx4925.c: some more fixes, eg. ppc405
|
|
support patch still wasn't completely applied
|
|
|
|
2007-11-06 20:56 Kolja Waschk <kawk>
|
|
|
|
* data/ibm/PARTS: [ 1173994 ] IBM PPC405EP support (PARTS file
|
|
wasn't updated when I applied the patch)
|
|
|
|
2007-11-06 20:53 Kolja Waschk <kawk>
|
|
|
|
* src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/jopcyc.c: [ 1281749 ] Bus driver for JOP.design Cyclone
|
|
boards (jopcyc+serial patch) (Arnim Laeuger)
|
|
|
|
2007-11-06 20:49 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am, data/altera/PARTS, data/altera/ep1c12,
|
|
data/altera/ep1c12/STEPPINGS, data/altera/ep1c12/ep1c12,
|
|
data/altera/ep1c12/f256, data/altera/ep1c12/f324,
|
|
data/altera/ep1c12/q240, data/altera/epm3064a,
|
|
data/altera/epm3064a/STEPPINGS, data/altera/epm3064a/epm3064a,
|
|
data/altera/epm3064a/l44, data/altera/epm3064a/t100,
|
|
data/altera/epm3064a/t44: [ 1281673 ] Device description files
|
|
for Altera EP1C12 and EPM3064A (Arnim Laeuger)
|
|
|
|
2007-11-06 20:32 Kolja Waschk <kawk>
|
|
|
|
* include/jtag.h, src/Makefile.am, src/cmd/Makefile.am,
|
|
src/cmd/cmd.c, src/cmd/writemem.c, src/writemem.c: [ 1249554 ]
|
|
Writemem command to write to SRAM (Kent Palmkvist)
|
|
|
|
2007-11-06 20:29 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am, data/altera/PARTS, data/altera/ep1c6q240,
|
|
data/altera/ep1c6q240/STEPPINGS, data/altera/ep1c6q240/ep1c6q240,
|
|
src/bus/Makefile.am, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/slsup3.c: [ 1249552 ] New bus type SLS UP3 (Altera FPGA
|
|
board) (Kent Palmkvist)
|
|
|
|
2007-11-06 20:26 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable.c, src/tap/cable/wiggler.c: [ 1236272 ] Add support
|
|
for Analog Devices Blackfin Processor: IGLOO.patch (Robin Getz)
|
|
|
|
2007-11-06 20:24 Kolja Waschk <kawk>
|
|
|
|
* src/bus/Makefile.am, src/bus/bf533_ezkit.c,
|
|
src/bus/bf533_stamp.c, src/bus/buses.c, src/bus/buses.h: [
|
|
1236272 ] Add support for Analog Devices Blackfin Processor:
|
|
STAMP_EZKIT.patch (Robin Getz)
|
|
|
|
2007-11-06 20:20 Kolja Waschk <kawk>
|
|
|
|
* data/MANUFACTURERS, data/Makefile.am, data/analog,
|
|
data/analog/PARTS, data/analog/bf533,
|
|
data/analog/bf533/STEPPINGS, data/analog/bf533/bf533: [ 1236272 ]
|
|
Add support for Analog Devices Blackfin Processor: Blackfin.patch
|
|
|
|
2007-11-06 20:15 Kolja Waschk <kawk>
|
|
|
|
* src/tap/parport/ppdev.c: [ 1194141 ] better diagnostics for
|
|
opening ppdev device (Hein Roehrig)
|
|
|
|
2007-11-06 20:14 Kolja Waschk <kawk>
|
|
|
|
* src/svf/svf.c, src/svf/svf.h, src/svf/svf_bison.y,
|
|
src/svf/svf_flex.l: [ 1194137 ] better SVF diagnostics (+ manual
|
|
integration with previous jtag-svf-vec-hexa fix) (Hein Roehrig)
|
|
|
|
2007-11-06 19:59 Kolja Waschk <kawk>
|
|
|
|
* src/svf/svf.c: [ 1194140 ] SVF better RUNTEST timing (Hein Roehrig)
|
|
|
|
2007-11-06 19:53 Kolja Waschk <kawk>
|
|
|
|
* include/Makefile.am, include/cable.h, include/fclock.h, src/Makefile.am,
|
|
src/cmd/frequency.c, src/lib/Makefile.am, src/lib/fclock.c,
|
|
src/tap/cable.c: [ 1194130 ] busy-loop waiting (breaks compilation of
|
|
svf.c... wait for next two patches) (Hein Roehrig)
|
|
|
|
2007-11-06 19:34 Kolja Waschk <kawk>
|
|
|
|
* src/tap/register.c: [ 1174000 ] Miscellanous fixes (omitting the
|
|
speedup for flash.c, obsoleted by an earlier patch) (Wojtek Kaniewski)
|
|
|
|
2007-11-06 19:31 Kolja Waschk <kawk>
|
|
|
|
* src/bsdl2jtag.c: [ 1173997 ] bsdl2jtag bidir support (Wojtek$ Kaniewski)
|
|
|
|
2007-11-06 19:29 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am, data/ibm/ppc405ep, data/ibm/ppc405ep/STEPPINGS,
|
|
data/ibm/ppc405ep/ppc405ep: [ 1173994 ] IBM PPC405EP support (Wojtek
|
|
Kaniewski)
|
|
|
|
2007-11-06 19:25 Kolja Waschk <kawk>
|
|
|
|
* src/bsdl2jtag.c: [ 1169349 ] better error codes for bsdl2jtag (Hein
|
|
Roehrig)
|
|
|
|
2007-11-06 19:23 Kolja Waschk <kawk>
|
|
|
|
* data/sharp/lh7a400/lh7a400: [ 1164111 ] FIX of the lh7a400 port (Marko
|
|
Roessler)
|
|
|
|
2007-11-06 19:22 Kolja Waschk <kawk>
|
|
|
|
* data/Makefile.am, data/intel/PARTS, data/intel/pxa270,
|
|
data/intel/pxa270/STEPPINGS, data/intel/pxa270/pxa270,
|
|
libbrux/flash/intel.c, src/bus/buses.c, src/bus/buses.h,
|
|
src/bus/pxa2x0.c, src/flash.c: [ 1112022 ] PXA270 Support (Cliff Brake)
|
|
|
|
2007-11-06 19:19 Kolja Waschk <kawk>
|
|
|
|
* README.svf, include/svf.h: [ 1074347 ] SVF Player (README and
|
|
include file) (Arnim Laeuger)
|
|
|
|
2007-11-06 19:18 Kolja Waschk <kawk>
|
|
|
|
* data/freescale, data/freescale/PARTS, data/freescale/mpc5200,
|
|
data/freescale/mpc5200/STEPPINGS, data/freescale/mpc5200/mpc5200,
|
|
src/bus/mpc5200.c: [ 1079531 ] jtag mpc5200 support (added files)
|
|
|
|
2007-11-06 19:06 Kolja Waschk <kawk>
|
|
|
|
* configure.ac, data/MANUFACTURERS, data/Makefile.am,
|
|
include/chain.h, src/bus/Makefile.am, src/bus/buses.c,
|
|
src/bus/buses.h: [ 1079531 ] jtag mpc5200 support (Asier Llano Palacios)
|
|
|
|
2007-11-06 19:01 Kolja Waschk <kawk>
|
|
|
|
* src/Makefile.am: add -lm because SVF player uses floor()
|
|
|
|
2007-11-06 18:58 Kolja Waschk <kawk>
|
|
|
|
* src/Makefile.am, src/cmd/Makefile.am, src/cmd/cmd.c,
|
|
src/cmd/svf.c, src/svf, src/svf/Makefile.am, src/svf/svf.c,
|
|
src/svf/svf.h, src/svf/svf_bison.y, src/svf/svf_flex.l,
|
|
src/tap/chain.c, src/tap/tap.c: [ 1074347 ] SVF Player (4
|
|
patches: jtag-svf, -inc1, -goto_state, -vec-hexa) (Arnim Laeuger)
|
|
|
|
2007-11-06 18:47 Kolja Waschk <kawk>
|
|
|
|
* src/tap/cable/wiggler.c, src/tap/cable/wiggler2.c: [ 1060345 ]
|
|
Fix certain Wigglers. (David Vrabel)
|
|
|
|
2007-11-06 18:37 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/bit.c: fix error from merging 972649+1012149 in bit.c
|
|
|
|
2007-11-06 18:32 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/bit.c: [ 1012149 ] Error messages in src/cmd/bit.c file (Jerome
|
|
Debard)
|
|
|
|
2007-11-06 18:21 Kolja Waschk <kawk>
|
|
|
|
* src/flash.c: [ 1012144 ] User messages printed during flashmem (Jerome
|
|
Debard)
|
|
|
|
2007-11-06 18:14 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/dr.c: [ 986415 ] Allow interactive loading of DR (Martin Buck)
|
|
|
|
2007-11-06 18:09 Kolja Waschk <kawk>
|
|
|
|
* src/cmd/bit.c, src/cmd/cable.c, src/cmd/dr.c, src/cmd/endian.c,
|
|
src/cmd/flashmem.c, src/cmd/get.c, src/cmd/print.c,
|
|
src/cmd/register.c, src/cmd/set.c, src/cmd/shift.c,
|
|
src/part/part.c, src/tap/parport/direct.c,
|
|
src/tap/parport/ppdev.c: [ 972649 ] make jtag more tolerant of
|
|
case (Andrew Dyer)
|
|
|
|
2007-11-06 18:04 Kolja Waschk <kawk>
|
|
|
|
* src/bus/ixp425.c, src/bus/mpc824x.c, src/bus/pxa2x0.c,
|
|
src/bus/s3c4510x.c, src/bus/sa1110.c, src/bus/sh7727.c,
|
|
src/bus/sh7750r.c, src/bus/sh7751r.c, src/cmd/detect.c,
|
|
src/tap/Makefile.am, src/tap/cable.c, src/tap/cable/wiggler2.c: [
|
|
909598 ] Detect 16bit flash on PXA25x 1/2 (partially included for
|
|
compatibility with other patches and wiggler2 driver, but actual
|
|
new pxa2x0 patch omitted - another later patch will fix this) (Matej)
|
|
|
|
2007-11-06 17:20 Kolja Waschk <kawk>
|
|
|
|
* src/bus/s3c4510x.c, src/cmd/peekpoke.c, src/jtag.c: [ 826404 ]
|
|
s3c4510 bus driver (without jedec.c fix) (Krzysztof Blaszkowski)
|
|
|
|
2007-11-06 16:51 Kolja Waschk <kawk>
|
|
|
|
* include/flash.h: [ 1268229 ] gcc4 compilation fix (Asier Llano Palacios)
|
|
|
|
2007-11-06 09:30 Kolja Waschk <kawk>
|
|
|
|
* libbrux, trunk/libbrux: moved libbrux subdir into jtag subdir. See
|
|
ChangeLog there too
|
|
|
|
2007-11-02 Kolja Waschk <Kolja Waschk <kawk>>
|
|
|
|
* created "UrJTAG" project as fork of openwince jtag tools. All older
|
|
log entries in this ChangeLog describe the openwince development.
|
|
|
|
2004-11-24 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/reset.c: New file.
|
|
* src/discovery.c (jtag_reset): Function changed to non-static.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added reset.c.
|
|
* src/cmd/cmd.c (cmds): Added cmd_reset.
|
|
|
|
2004-11-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_parse_stream, cleanup): New function.
|
|
(jtag_parse_file): Replaced stream parsing algorithm with jtag_parse_stream() call. Removed support
|
|
for special filename '-'.
|
|
(main): Rewritten and improved startup sequence to distinguish between interactive invocation
|
|
and stdin input (fixed bug 858535, thanks to Andrew Dyer for an idea).
|
|
|
|
2004-11-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* acinclude.m4: New file with VL_LIB_READLINE macro (removed dependency on ac-archive package).
|
|
* autogen.sh: Removed acinclude call (removed dependency on ac-archive package).
|
|
|
|
2004-11-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added Lattice Semiconductors and IBM Semiconductors (patch 1012120, Jerome Debard).
|
|
* data/ibm/PARTS: New file (patch 1012120, Jerome Debard).
|
|
* data/ibm/ppc440gx/STEPPINGS: Ditto.
|
|
* data/ibm/ppc440gx/ppc440gx: Ditto.
|
|
* data/lattice/PARTS: Ditto.
|
|
* data/lattice/lc4032v-tqfp48/STEPPINGS: Ditto.
|
|
* data/lattice/lc4032v-tqfp48/lc4032v-tqfp48: Ditto.
|
|
* data/lattice/m4a3-256.192-fpbga256/STEPPINGS: Ditto.
|
|
* data/lattice/m4a3-256.192-fpbga256/m4a3-256.192-fpbga256: Ditto.
|
|
* data/lattice/m4a3-64.32-tqfp48/STEPPINGS: Ditto.
|
|
* data/lattice/m4a3-64.32-tqfp48/m4a3-64.32-tqfp48: Ditto.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.
|
|
|
|
2004-10-22 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added Sharp manufacturer (patch 886068, Marko Rößler).
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files (patch 886068, Marko Rößler).
|
|
* data/sharp/PARTS: New file (patch 886068, Marko Rößler).
|
|
* data/sharp/lh7a400/STEPPINGS: Ditto.
|
|
* data/sharp/lh7a400/lh7a400: Ditto.
|
|
* src/bus/lh7a400.c: Ditto.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added lh7a400.c (patch 886068, Marko Rößler).
|
|
* src/bus/buses.c (bus_drivers): Added lh7a400_bus (patch 886068, Marko Rößler).
|
|
* src/bus/buses.h: Ditto.
|
|
|
|
2004-10-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed version number to 0.6.
|
|
(AM_GNU_GETTEXT_VERSION): Changed version number for gettext to 0.14.1.
|
|
|
|
2004-10-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/wiggler.c (nTRST): Changed pin value (patch 1040199, Andrew Dyer).
|
|
(nSRESET): New pin value (patch 1040199, Andrew Dyer).
|
|
(wiggler_init, wiggler_clock, wiggler_get_tdo, wiggler_set_trst): Changed nTRST to not inverted
|
|
signal (patch 1040199, Andrew Dyer).
|
|
|
|
2004-09-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/intel/PARTS: Added support for different IXP425 frequency variants (patch 1030647, Trevor Man).
|
|
|
|
2004-08-24 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added ppc440gx_ebc8.c.
|
|
* src/bus/buses.c (bus_drivers): Added ppc440gx_ebc8_bus (patch 1012154, Jerome Debard).
|
|
* src/bus/buses.h: Ditto.
|
|
* src/bus/ppc440gx_ebc8.c: New file (patch 1012154, Jerome Debard).
|
|
|
|
2004-08-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_init): New function.
|
|
(pxa250_bus_prepare): Replaced bus initialization sequence with pxa2x0_bus_init() call.
|
|
(pxa2x0_bus_area): Added pxa2x0_bus_init() call.
|
|
|
|
2004-08-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Added cable/lattice.c.
|
|
* src/tap/cable.c (cable_drivers): Added lattice_cable_driver (patch 1012138, Jerome Debard).
|
|
* src/tap/cable/lattice.c: New file (patch 1012138, Jerome Debard).
|
|
|
|
2004-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added tx4925.c (patch 972625, Andrew Dyer).
|
|
* src/bus/buses.c (bus_drivers): Added tx4925_bus (patch 972625, Andrew Dyer).
|
|
* src/bus/buses.h: Ditto.
|
|
* src/bus/tx4925.c: New file (patch 972625, Andrew Dyer).
|
|
|
|
2004-08-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added Toshiba manufacturer (patch 972621, Andrew Dyer).
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files (patch 972621, Andrew Dyer).
|
|
* data/xilinx/PARTS: Added XCR3032XL-VQ44 entry (patch 972621, Andrew Dyer).
|
|
* data/xilinx/xcr3032xl-vq44/STEPPINGS: New file (patch 972621, Andrew Dyer).
|
|
* data/xilinx/xcr3032xl-vq44/xcr3032xl-vq44: Ditto.
|
|
* data/toshiba/PARTS: Ditto.
|
|
* data/toshiba/tx4925/STEPPINGS: Ditto.
|
|
* data/toshiba/tx4925/tx4925: Ditto.
|
|
* data/toshiba/tx4926/STEPPINGS: Ditto.
|
|
* data/toshiba/tx4926/tx4926: Ditto.
|
|
|
|
2004-08-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.
|
|
* data/philips/PARTS: Added XCR3128XL-VQ100 entry (patch 1010714, Michael Lauer).
|
|
* data/xilinx/PARTS: Added directory for XCR3128XL-VQ100 entry (patch 1010714, Michael Lauer).
|
|
* data/philips/xcr3128xl-vq100/STEPPINGS: New file (patch 1010714, Michael Lauer).
|
|
* data/philips/xcr3128xl-vq100/xcr3128xl-vq100: Ditto.
|
|
* data/xilinx/xcr3128xl-vq100/xcr3128xl-vq100: Ditto.
|
|
|
|
2004-08-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/pxa2x0.c (bus_params_t): Added new member: inited.
|
|
(INITED): New macro.
|
|
(pxa2x0_bus_new): Removed BOOT_DEF initialization.
|
|
(pxa250_bus_prepare): Added BOOT_DEF initialization.
|
|
|
|
2004-08-15 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/jtag.h (detect_parts): Changed return type.
|
|
* src/detect.c (detect_parts): Changed return value to return number of detected parts.
|
|
* src/cmd/detect.c (cmd_detect_run): Added reset of the chain->parts to NULL before
|
|
detect_parts() call. Ignored detect_parts() return value.
|
|
|
|
2004-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c: Added missing locale.h include (patch 986414, Martin Buck).
|
|
|
|
2004-08-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* Makefile.rules (RECURSIVE_TARGETS, lint-recursive): Removed.
|
|
(lint): Added command to run recursive make.
|
|
(.PHONY): Removed lint-recursive.
|
|
|
|
2004-06-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/broadcom/PARTS: Added BCM4712 entry (Alan Wallace).
|
|
* data/broadcom/bcm4712/STEPPINGS: New file (Alan Wallace).
|
|
* data/broadcom/bcm4712/bcm4712: Ditto.
|
|
|
|
2004-01-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* acinclude.m4: File removed.
|
|
* autogen.sh: Added acinclude call.
|
|
|
|
2003-12-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added au1500.c.
|
|
* src/bus/au1500.c: New file (patch 853883, Zhang Wei).
|
|
* src/bus/buses.c (bus_drivers): Added au1500_bus (patch 853883, Zhang Wei).
|
|
* src/bus/buses.h: Added au1500_bus.
|
|
|
|
2003-11-02 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed version number to 0.5.2.
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added motorola/mpc8245/1.2.
|
|
* data/motorola/mpc8245/1.2: New file.
|
|
* src/bus/mpc824x.c: Ditto.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added mpc824x.c.
|
|
* src/bus/buses.c (bus_drivers): Added mpc824x_bus.
|
|
* src/bus/buses.h (mpc824x_bus): Added bus declaration.
|
|
|
|
* include/bsbit.h (bsbit_alloc): Changed parameter name (signals -> signal).
|
|
* src/part/bsbit.c (bsbit_alloc): Changed parameter behaviour.
|
|
* src/cmd/bit.c (cmd_bit_run): Passed exact signal to bsbit_alloc() instead of list of signals.
|
|
|
|
* src/jtag.c (main): Added cfi_array deallocation.
|
|
|
|
* src/flash.c (set_flash_driver): Used global cfi_array variable to set flash driver.
|
|
(flashcheck): Function removed.
|
|
All function calls replaced by set_flash_driver().
|
|
(flashmsbin): Removed local cfi_array variable.
|
|
(flashmem): Removed local cfi_array variable. Fixed bug with one more block erase while programming
|
|
data at end of previous block.
|
|
(flasherase): Removed local cfi_array variable. Fixed block number calculation.
|
|
* src/readmem.c (readmem): Fixed bug while reading address near to end of 32 bit address range.
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_new): Added BSR sampling before BOOT_DEF initialization (bugfix).
|
|
|
|
2003-10-23 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bssignal.h (salias_t): Added new type.
|
|
(salias_alloc, salias_free): Adde new function prototypes.
|
|
* include/part.h (struct part): Added new structure member 'saliases'.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added salias.c.
|
|
* src/cmd/cmd.c (cmds): Added cmd_salias.
|
|
* src/cmd/salias.c: New file.
|
|
* src/part/part.c (part_alloc): Added saliases initialization.
|
|
(part_free): Added saliases deallocation.
|
|
(part_find_signal): Added signal aliases searching.
|
|
* src/part/signal.c (salias_alloc, salias_free): New functions.
|
|
|
|
2003-10-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/hitachi/hd64465/hd64465: Completed BSR bits declaration.
|
|
|
|
2003-10-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added hitachi/sh7729/STEPPINGS and hitachi/sh7729/sh7729.
|
|
* data/hitachi/sh7729/STEPPINGS: New file (Beregnyei Balazs).
|
|
* data/hitachi/sh7729/sh7729: Ditto.
|
|
|
|
2003-10-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added hitachi/hd64465/hd64465.
|
|
* data/hitachi/hd64465/hd64465: New file.
|
|
|
|
2003-10-13 Marcel Telka <marcel@telka>
|
|
|
|
* data/intel/ixp425/STEPPINGS: Added B0 stepping.
|
|
|
|
2003-10-11 Marcel Telka <marcel@telka>
|
|
|
|
Version 0.5.1 released.
|
|
|
|
2003-09-23 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flash_drivers): Added amd_16_flash_driver (Bradley D. LaRonde).
|
|
(find_block): New function (Bradley D. LaRonde).
|
|
(flashmem): Added block calculations using exact CFI data (Bradley D. LaRonde).
|
|
|
|
* src/tap/cable/triton.c (triton_init): Removed unused variable 'data'.
|
|
|
|
2003-09-15 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Fixed spelling (patch 805108, Andreas Mohr).
|
|
* src/jtag.c (main): Ditto.
|
|
* src/cmd/discovery.c (cmd_discovery_help, cmd_discovery): Ditto.
|
|
* src/cmd/flashmem.c (cmd_flashmem_help): Ditto.
|
|
|
|
* src/tap/cable/ei012.c: Changed comment (patch 805108, Andreas Mohr).
|
|
* src/tap/cable/keithkoep.c: Ditto.
|
|
* src/tap/cable/mpcbdm.c: Ditto.
|
|
|
|
2003-09-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/triton.c: New file (patch 805103, Andreas Mohr).
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Added cable/triton.c (patch 805103, Andreas Mohr).
|
|
* src/tap/cable.c (cable_drivers): Added triton_cable_driver member (patch 805103, Andreas Mohr).
|
|
* src/tap/cable/generic.h (PARAM_SRESET): New macro (patch 805103, Andreas Mohr).
|
|
(generic_params_t): New structure member 'sreset' (patch 805103, Andreas Mohr).
|
|
|
|
* configure.ac: Changed description for --with-include parameter (thanks to Andreas Mohr).
|
|
|
|
2003-09-12 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CHECK_FUNCS): Added swprintf.
|
|
* src/cmd/print.c (cmd_print_run): Added alternative implementation of the header printing using
|
|
snprintf() for platforms without swprintf() function available.
|
|
|
|
2003-09-12 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed version number to 0.5.1.
|
|
|
|
2003-09-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/wiggler.c (wiggler_init, wiggler_clock, wiggler_get_tdo, wiggler_set_trst): Fixed
|
|
inverted TRST signal (see patch 799377 for more info, thanks to Mike Tesch for reporting).
|
|
|
|
2003-09-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/dr.c (cmd_dr_run): Added test for missing active instruction and data register (thanks to
|
|
Mike Tesch for reporting).
|
|
|
|
2003-09-10 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/bcm1250.c (bcm1250_bus_printinfo, bcm1250_bus): Fixed typo (compatibile->compatible) in
|
|
output message (thanks to Andreas Mohr).
|
|
* src/bus/ixp425.c (ixp425_bus_printinfo, ixp425_bus): Ditto.
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_printinfo, pxa2x0_bus): Ditto.
|
|
* src/bus/s3c4510x.c (s3c4510_bus_printinfo, s3c4510_bus): Ditto.
|
|
* src/bus/sa1110.c (sa1110_bus_printinfo, sa1110_bus): Ditto.
|
|
* src/bus/sh7727.c (sh7727_bus_printinfo, sh7727_bus): Ditto.
|
|
* src/bus/sh7750r.c (sh7750r_bus_printinfo, sh7750r_bus): Ditto.
|
|
* src/bus/sh7751r.c (sh7751r_bus_printinfo, sh7751r_bus): Ditto.
|
|
|
|
2003-09-05 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bus.h (bus_drivers): Added constant declaration.
|
|
(new_sa1110_bus, new_pxa250_bus, new_ixp425_bus, new_sh7727_bus, new_sh7750r_bus, new_sh7751r_bus)
|
|
(new_bcm1250_bus): Function declarations removed.
|
|
* src/bus/buses.c (bus_drivers): New constant definition.
|
|
* src/bus/buses.h: New file.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added buses.h.
|
|
|
|
* src/bus/bcm1250.c (bcm1250_bus_printinfo): Added new function parameter 'bus'.
|
|
(bcm1250_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_bcm1250_bus): Function renamed ...
|
|
(bcm1250_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/ixp425.c (ixp425_bus_printinfo): Added new function parameter 'bus'.
|
|
(ixp425_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_ixp425_bus): Function renamed ...
|
|
(ixp425_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_printinfo): Added new function parameter 'bus'.
|
|
(pxa250_bus): Structure transformed ...
|
|
(pxa2x0_bus): ... to this constant (changed type to bus_driver_t, changed members).
|
|
(new_pxa250_bus): Function renamed ...
|
|
(pxa2x0_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/s3c4510x.c (s3c4510_bus_printinfo): Added new function parameter 'bus'.
|
|
(s3c4510_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_s3c4510_bus): Function renamed ...
|
|
(s3c4510_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/sa1110.c (sa1110_bus_printinfo): Added new function parameter 'bus'.
|
|
(sa1110_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_sa1110_bus): Function renamed ...
|
|
(sa1110_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/sh7727.c (sh7727_bus_printinfo): Added new function parameter 'bus'.
|
|
(sh7727_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_sh7727_bus): Function renamed ...
|
|
(sh7727_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/sh7750r.c (sh7750r_bus_printinfo): Added new function parameter 'bus'.
|
|
(sh7750r_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_sh7750r_bus): Function renamed ...
|
|
(sh7750r_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
* src/bus/sh7751r.c (sh7751r_bus_printinfo): Added new function parameter 'bus'.
|
|
(sh7751r_bus): Changed structure type to bus_driver_t. Changed members.
|
|
(new_sh7751r_bus): Function renamed ...
|
|
(sh7751r_bus_new): ... to this one. Changed parameter list to void (and function body updated).
|
|
|
|
* src/cmd/cable.c (cmd_cable_run): Replaced bus->free() call with bus_free().
|
|
* src/jtag.c (main): Ditto.
|
|
|
|
* src/cmd/cmd.c (cmds): Added cmd_initbus.
|
|
* src/cmd/detect.c (cmd_detect_run): Removed explicit bus driver detection.
|
|
* src/cmd/initbus.c: New file.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added initbus.c.
|
|
|
|
* data/broadcom/bcm1250/bcm1250: Added 'initbus' command call.
|
|
* data/hitachi/sh7727/sh7727: Ditto.
|
|
* data/intel/ixp425/ixp425: Ditto.
|
|
* data/intel/pxa250/pxa250: Ditto.
|
|
* data/intel/pxa250/pxa250c0: Ditto.
|
|
* data/intel/sa1110/sa1110: Ditto.
|
|
* data/samsung/s3c4510b/s3c4510b: Ditto.
|
|
|
|
2003-09-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (CPPFLAGS): Added top_srcdir into include directory list.
|
|
|
|
2003-09-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/pxa2x0.c (set_data_in, setup_data): Added new 'adr' parameter. Used real data bus width
|
|
for data reading (based on patch 792591, thanks to Guennadi Liakhovetski).
|
|
All function callers updated.
|
|
(pxa250_bus_read_next, pxa250_bus_read_end): Used real data bus width for data reading (based on
|
|
patch 792591, thanks to Guennadi Liakhovetski).
|
|
* src/bus/sa1110.c (set_data_in, setup_data, sa1110_bus_read_next, sa1110_bus_read_end): Ditto.
|
|
* src/bus/sh7727.c (set_data_in, setup_data, sh7727_bus_read_next, sh7727_bus_read_end): Ditto.
|
|
|
|
2003-08-28 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/pxa2x0.c (pxa250_bus_read_next, pxa250_bus_read_end): Added support for BOOT_DEF register
|
|
emulation.
|
|
(pxa2x0_bus_area): Added Memory Mapped registers (Memory Ctl) area.
|
|
|
|
2003-08-28 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/readmem.c (readmem): Replaced bus_width macro with new bus_area.
|
|
* src/bus/bcm1250.c (bcm1250_bus_width): Function removed.
|
|
(bcm1250_bus_area): New function.
|
|
* src/bus/ixp425.c (ixp425_bus_width): Function removed.
|
|
(ixp425_bus_area): New function.
|
|
* src/bus/pxa2x0.c (pxa250_bus_width): Function removed.
|
|
(pxa2x0_bus_area): New function.
|
|
* src/bus/s3c4510x.c (s3c4510_bus_width): Function removed.
|
|
(s3c4510_bus_area): New function.
|
|
* src/bus/sa1110.c (sa1110_bus_width: Function removed.
|
|
(sa1110_bus_area): New function.
|
|
* src/bus/sh7727.c (sh7727_bus_width): Function removed.
|
|
(sh7727_bus_area): New function.
|
|
* src/bus/sh7750r.c (sh7750r_bus_width): Function removed.
|
|
(sh7750r_bus_area): New function.
|
|
* src/bus/sh7751r.c (sh7751r_bus_width): Function removed.
|
|
(sh7751r_bus_area): New function.
|
|
* src/cmd/print.c (cmd_print_run): Added bus area printing.
|
|
|
|
2003-08-27 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/flash.h: Removed CFI_INTEL_ERROR_* macros.
|
|
|
|
2003-08-26 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/print.c (cmd_print_run): Fixed header print format.
|
|
|
|
2003-08-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed package name.
|
|
* src/jtag.c (main): Added full package name to banner.
|
|
|
|
2003-08-22 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/byteblaster.c (byteblaster_init): Added additional checks for valid ByteBlaster cable
|
|
connection and enabled all variants of the cable (patch 793313, Rojhalat Ibrahim).
|
|
|
|
2003-08-22 Marcel Telka <marcel@telka.sk>
|
|
|
|
* MANUFACTURERS: Added Altera manufacturer (Rojhalat Ibrahim).
|
|
* altera/PARTS: New file (Rojhalat Ibrahim).
|
|
* altera/ep1c20f400/STEPPINGS: Ditto.
|
|
* altera/ep1c20f400/ep1c20f400: Ditto.
|
|
* altera/epm7128aetc100/STEPPINGS: Ditto.
|
|
* altera/epm7128aetc100/epm7128aetc100: Ditto.
|
|
* Makefile.am (nobase_dist_pkgdata_DATA): Added new Altera JTAG files.
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.5 released.
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AM_GNU_GETTEXT_VERSION): Changed version number to 0.12.1.
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/s3c4510x.c: Changed comment.
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added s3c4510x.c.
|
|
* src/bus/s3c4510x.c: New file (Jiun-Shian Ho).
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/parport/direct.c (direct_connect): Marked two indirect strings for translation.
|
|
* src/tap/parport/ppdev.c (ppdev_connect): Ditto.
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* sysdep.h: Renamed pkgcfg.h to config.h.
|
|
* configure.ac (AM_CONFIG_HEADER): Ditto.
|
|
|
|
2003-08-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Fixed setlocale() call.
|
|
* Makefile.am (noinst_HEADERS): Renamed config.h -> sysdep.h.
|
|
* config.h: Renamed this file ...
|
|
* sysdep.h: ... to this one.
|
|
Changed config.h -> sysdep.h include in all source files.
|
|
|
|
2003-08-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/samsung/s3c4510b/s3c4510b: Fixed some errors in instruction declarations (Jiun-Shian Ho).
|
|
|
|
2003-08-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/detect.c (detect_parts): Marked one forgotten string for translation.
|
|
* src/cmd/bit.c (cmd_bit_run): Fixed control bit setup.
|
|
* src/cmd/eraseflash.c (cmd_eraseflash_run): Changed formatting.
|
|
(cmd_eraseflash_help): Updated help text.
|
|
* src/cmd/flashmem.c (cmd_flashmem_help): Ditto.
|
|
* src/cmd/readmem.c (cmd_readmem_help): Ditto.
|
|
|
|
2003-08-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/jtag.h (flasherase): New function prototype (patch 772267, Thomas Fröhlich).
|
|
* src/flash.c (flasherase): New function (patch 772267, Thomas Fröhlich).
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added eraseflash.c (patch 772267, Thomas Fröhlich).
|
|
* src/cmd/cmd.c (cmds): Added cmd_eraseflash (patch 772267, Thomas Fröhlich).
|
|
* src/cmd/eraseflash.c: New file (patch 772267, Thomas Fröhlich).
|
|
|
|
2003-08-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/chain.c (chain_shift_instructions): Moved test for parts without active instruction before
|
|
shifting process.
|
|
(chain_shift_data_registers): Moved test for parts without active instruction or data register before
|
|
shifting process.
|
|
|
|
2003-08-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added samsung/s3c4510b/s3c4510b.
|
|
* data/samsung/s3c4510b/s3c4510b: New file (Jiun-Shian Ho).
|
|
|
|
2003-08-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Changed directory name for Philips.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added philips/PARTS, philips/xcr3128xl-cs144/STEPPINGS, and
|
|
philips/xcr3128xl-cs144/xcr3128xl-cs144.
|
|
* data/philips/PARTS: New file.
|
|
* data/philips/xcr3128xl-cs144/STEPPINGS: Ditto.
|
|
* data/philips/xcr3128xl-cs144/xcr3128xl-cs144: Ditto.
|
|
* include/part.h (MAXLEN_MANUFACTURER): Increased size to 25.
|
|
|
|
2003-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/jtag.h (detect_register_size): Added function declaration.
|
|
* src/discovery.c (detect_register_size): Changed to non-static.
|
|
* src/detect.c (detect_parts): Added support for parts without IDCODE.
|
|
|
|
2003-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/sa1110.c (sa1110_bus_width): Removed bus width printing.
|
|
* src/bus/sh7751r.c (sh7751r_bus_printinfo): New function.
|
|
|
|
2003-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bus.h (new_sh7751r_bus): New function declaration (patch 773533, Matan Ziv-Av).
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added sh7751r.c (patch 773533, Matan Ziv-Av).
|
|
* src/bus/sh7751r.c: New file (patch 773533, Matan Ziv-Av).
|
|
|
|
2003-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/part.h (struct part): Added new member 'id'.
|
|
(part_alloc): Added new parameter 'id'.
|
|
* src/detect.c (detect_parts): Added execution JTAG declarations as script.
|
|
* src/jtag.c (get_token): Added support for in-line comments.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added signal.c, bit.c, and register.c.
|
|
* src/cmd/bit.c: New file.
|
|
* src/cmd/register.c: Ditto.
|
|
* src/cmd/signal.c: Ditto.
|
|
* src/cmd/cmd.c (cmds): Added cmd_signal, cmd_bit, and cmd_register.
|
|
* src/cmd/instruction.c (cmd_instruction_run, cmd_instruction_help, cmd_instruction): Added support
|
|
for new instruction declaration.
|
|
* src/part/parse.c: File removed.
|
|
* src/part/Makefile.am (libpart_a_SOURCES): Removed parse.c.
|
|
* src/cmd/detect.c (cmd_detect_run): Fixed possible NULL pointer dereference.
|
|
* src/part/part.c (part_alloc): Added new parameter 'id'.
|
|
(part_free): Addedd id deallocation.
|
|
(part_print): Added support for instructions without data register.
|
|
* src/tap/chain.c (chain_shift_data_registers): Ditto.
|
|
|
|
2003-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/broadcom/bcm5421s/bcm5421s: Fixed bad pin -> signal changes.
|
|
|
|
2003-08-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/broadcom/bcm1250/bcm1250: Changed pin -> signal keyword.
|
|
* data/broadcom/bcm5421s/bcm5421s: Ditto.
|
|
* data/hitachi/sh7727/sh7727: Ditto.
|
|
* data/intel/ixp425/ixp425: Ditto.
|
|
* data/intel/pxa250/pxa250: Ditto.
|
|
* data/intel/pxa250/pxa250c0: Ditto.
|
|
* data/intel/sa1110/sa1110: Ditto.
|
|
* data/xilinx/xc2c256-tq144/xc2c256-tq144: Ditto.
|
|
* data/xilinx/xcr3128xl-cs144/xcr3128xl-cs144: Ditto.
|
|
* data/xilinx/xcr3256xl-ft256/xcr3256xl-ft256: Ditto.
|
|
|
|
2003-08-12 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bsdl2jtag.c (endline): Added support for "downto" in bit vectors and "observe_only" (patch 787346,
|
|
Brad Parker).
|
|
|
|
2003-08-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added include.c.
|
|
* src/cmd/include.c: New file.
|
|
* src/cmd/cmd.c (cmds): Added cmd_include.
|
|
|
|
2003-08-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flash_drivers): Added amd_8_flash_driver.
|
|
|
|
2003-08-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bus.h (buses_t): Added new structure.
|
|
* src/jtag.c (bus): Removed global variable.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added buses.c.
|
|
* src/bus/buses.c: New file.
|
|
* src/bus/bcm1250.c (bcm1250_bus_printinfo): New function.
|
|
* src/bus/ixp425.c (ixp425_bus_printinfo): Ditto.
|
|
* src/bus/pxa2x0.c (pxa2x0_bus_printinfo): Ditto.
|
|
* src/bus/sa1110.c (sa1110_bus_printinfo): Ditto.
|
|
* src/bus/sh7727.c (sh7727_bus_printinfo): Ditto.
|
|
* src/bus/sh7750r.c (sh7750r_bus_printinfo): Ditto.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added bus.c.
|
|
* src/cmd/bus.c: New file.
|
|
* src/cmd/cmd.c (cmds): Added cmd_bus.
|
|
* src/cmd/detect.c (cmd_detect_run): Added support for multiple buses detection.
|
|
* src/cmd/print.c (cmd_print_run): Fixed header printing while syntax error. Added support for printing
|
|
list of active buses.
|
|
(cmd_print_help): Added new parameter 'bus'.
|
|
|
|
2003-08-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed version number to 0.5.
|
|
|
|
* include/chain.h (chain_t): Added active_part.
|
|
* src/tap/chain.c (chain_alloc): Added active_part initialization.
|
|
* include/part.h (parts_print): Removed 'header' parameter.
|
|
* src/part/part.c (parts_print): Removed header printing.
|
|
* src/cmd/print.c (cmd_print_run): Added header printg. Added new parameter 'chain' for print command.
|
|
(cmd_print_help): Added new parameter 'chain'.
|
|
* src/cmd/dr.c (cmd_dr_run, cmd_dr_help): Removed PART parameter.
|
|
* src/cmd/get.c (cmd_get_run, cmd_get_help): Ditto.
|
|
* src/cmd/instruction.c (cmd_instruction_run, cmd_instruction_help): Ditto.
|
|
* src/cmd/set.c (cmd_set_run, cmd_set_help): Ditto.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Adde part.c.
|
|
* src/cmd/part.c: New file.
|
|
* src/cmd/cmd.c (cmds): Added cmd_part.
|
|
|
|
2003-07-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added broadcom/bcm3310/STEPPINGS and
|
|
broadcom/bcm3310/bcm3310.
|
|
* data/broadcom/PARTS: Added BCM3310.
|
|
* data/broadcom/bcm3310/STEPPINGS: New file.
|
|
* data/broadcom/bcm3310/bcm3310: Ditto.
|
|
|
|
2003-07-24 Marcel Telka <marcel@telka.sk>
|
|
|
|
* po/POTFILES.in: Removed missing files.
|
|
* configure.ac: Removed VL_LIB_READLINE macro and moved it to ...
|
|
* acinclude.m4: ... this new file.
|
|
|
|
2003-07-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_parse_line): Fixed invalid memory allocation size (core dump).
|
|
|
|
2003-07-01 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bus.h (new_sh7750r_bus, new_bcm1250_bus): New function declarations (patch 753300, Matan Ziv-Av).
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added bcm1250.c and sh7750r.c (patch 753300, Matan Ziv-Av).
|
|
* src/bus/bcm1250.c: New file (patch 753300, Matan Ziv-Av).
|
|
* src/bus/sh7750r.c: Ditto.
|
|
* src/cmd/detect.c (cmd_detect_run): Added bus driver for SH7750R and BCM1250 (patch 753300, Matan Ziv-Av).
|
|
|
|
2003-06-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/jtag.h (discovery): Removed 'filename' parameter.
|
|
* src/discovery.c (TEST_COUNT): Changed test repeat count from 5 to 1.
|
|
(detect_register_size): Removed 'f' parameter. Removed output messages.
|
|
(jtag_reset): Removed sleep() calls.
|
|
(discovery): Removed 'filename' parameter. Removed support for output to file. Simplified output
|
|
messages.
|
|
* src/cmd/discovery.c (cmd_discovery_run): Removed FILENAME parameter.
|
|
(cmd_discovery_help): Updated help text.
|
|
|
|
2003-06-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/discovery.c (discovery): Removed explicit JTAG chain length detection. Changed starting of the DR
|
|
size detection from all 1 instead all 0 for IR (patch 753298, Matan Ziv-Av).
|
|
|
|
2003-06-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* /src/flash.c (flash_drivers): Added 1 x 8 bit Intel Flash driver (patch 753295, Matan Ziv-Av).
|
|
|
|
2003-06-12 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/flash.h (flash_driver_t): Structure removed.
|
|
(flash_erase_block, flash_unlock_block, flash_program, flash_readarray): Macro removed.
|
|
* src/flash.c (set_flash_driver, flashcheck, flashmsbin, flashmem): Updated for new
|
|
flash_driver_t declared in brux/flash.h in include module.
|
|
|
|
2003-06-10 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Removed cfi.h.
|
|
* include/cfi.h: File removed.
|
|
* src/flash.c: Updated include header files.
|
|
|
|
2003-06-10 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/sh7727.c (bus_params_t): Added md3 and md4.
|
|
(sh7727_bus_width): Moved to implementation using MD3 and MD4 (thanks to Rainer Dörken).
|
|
(new_sh7727_bus): Added MD3 and MD4 signal searching (thanks to Rainer Dörken).
|
|
|
|
2003-06-10 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/ixp425.c (ixp425_bus_width): Changed return value type (int -> unsigned int).
|
|
* src/bus/pxa2x0.c (pxa250_bus_width): Ditto.
|
|
* src/bus/sa1110.c (sa1110_bus_width): Ditto.
|
|
* src/bus/sh7727.c (sh7727_bus_width): Ditto.
|
|
|
|
2003-06-06 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bus/sh7727.c (bus_params_t): Fixed cs array length.
|
|
(setup_address): Removed address shift by BASE.
|
|
(sh7727_bus_read_end): Simplified CS handling.
|
|
(new_sh7727_bus): Fixed CS signal searching (thanks to Rainer Dörken).
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/cfi.h (detect_cfi): Macro removed.
|
|
* src/flash.c (flashcheck): Renamed detect_cfi to cfi_detect.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/Makefile.am (jtag_LDADD): Added libbrux twice to resolve dependencies.
|
|
* src/jtag.c: Fixed cmd.h include path.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Removed quit.c, help.c, and detectflash.c.
|
|
* src/cmd/cmd.c (cmd_run, cmd_params, cmd_get_number): Functions moved to module libbrux,
|
|
file cmd/cmd.c.
|
|
* src/cmd/detectflash.c: File moved to module libbrux, directory cmd.
|
|
* src/cmd/help.c: Ditto.
|
|
* src/cmd/quit.c: Ditto.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Added cmd.h.
|
|
* include/cmd.h: New file.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Removed cmd.h.
|
|
* src/cmd/cmd.h: File removed. Partially moved to include module (file brux/cmd.h).
|
|
|
|
* src/cmd/detectflash.c (cmd_detectflash_help): Changed help text.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/readmem.c (detectflash): Function extracted to module libbrux, file flash/detectflash.c.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/jtag.h (detectflash, flashmem, flashmsbin): Declarations moved to include module,
|
|
file brux/flash.h.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/cable.c (cmd_cable_run): Added bus deallocation.
|
|
* src/cmd/detectflash.c (cmd_detectflash_run): Removed cable connection test.
|
|
* src/cmd/flashmem.c (cmd_flashmem_run): Ditto.
|
|
* src/cmd/peekpoke.c (cmd_peek_run, cmd_poke_run): Ditto.
|
|
* src/cmd/readmem.c (cmd_readmem_run): Ditto.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flashmsbin, flashmem): Removed '\r' from translatable messages.
|
|
* src/readmem.c (readmem): Ditto.
|
|
|
|
2003-06-03 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added peekpoke.c (patch 747447, Matan Ziv-Av).
|
|
* src/cmd/cmd.c (cmds): Added peek and poke commands (patch 747447, Matan Ziv-Av).
|
|
* src/cmd/peekpoke.c: New file (patch 747447, Matan Ziv-Av).
|
|
* po/POTFILES.in: Updated.
|
|
|
|
* include/bus.h (bus_t): Declaration moved to include module (brux/bus.h).
|
|
* include/cfi.h (cfi_chip_t, cfi_array_t, cfi_array_free, detect_cfi): Declarations moved
|
|
to include module (brux/cfi.h).
|
|
|
|
2003-06-02 Marcel Telka <marcel@telka.sk>
|
|
|
|
* Makefile.am (SUBDIRS): Added libbrux.
|
|
* configure.ac (AC_CONFIG_FILES): Removed src/flash/Makefile.
|
|
(AC_CONFIG_SUBDIRS): Added libbrux.
|
|
* src/Makefile.am (SUBDIRS): Removed flash.
|
|
(jtag_DEPENDENCIES): Removed flash/libflash.a, added ../libbrux/libbrux.a.
|
|
(jtag_LDADD): Removed libflash, added libbrux.
|
|
* src/flash/Makefile.am: File removed.
|
|
* src/flash/amd.c: File moved to module libbrux, directory flash.
|
|
* src/flash/cfi.c: Ditto.
|
|
* src/flash/intel.c: Ditto.
|
|
|
|
2003-05-30 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/parport/direct.c (direct_set_control): Inverted SELECT, AUTOFD, and STROBE
|
|
signals (bug 745824).
|
|
* src/tap/parport/ppdev.c (ppdev_set_control): Ditto.
|
|
* src/tap/cable/mpcbdm.c (mpcbdm_init, mpcbdm_set_trst): Changed (inverted) TRST handling.
|
|
(mpcbdm_clock, mpcbdm_get_tdo): Removed TRST setting.
|
|
|
|
2003-05-29 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.4 released.
|
|
|
|
2003-05-29 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bsdl2jtag.c (main): Renamed 'pin' keyword to 'signal'.
|
|
* src/part/parse.c (read_part): Added support for 'signal' keyword.
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.
|
|
* data/dec/PARTS: New file.
|
|
* data/dec/sa1100/STEPPINGS: New file (thanks to Jachym Holecek).
|
|
* data/dec/sa1100/sa1100: New file.
|
|
|
|
2003-05-28 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed version number to 0.4.
|
|
|
|
* src/cmd/frequency.c (cmd_frequency_run): Added support for printing current TCK frequency.
|
|
(cmd_frequency_help): Updated help text.
|
|
|
|
* po/POTFILES.in: Updated.
|
|
* src/detect.c (find_record, detect_parts): Marked messages for translation.
|
|
* src/discovery.c (detect_register_size, discovery): Ditto.
|
|
* src/flash.c (set_flash_driver, flashcheck, flashmsbin, flashmem): Ditto.
|
|
* src/readmem.c (readmem): Ditto.
|
|
* src/flash/amd.c (amd_flash_print_info, amd_32_flash_driver): Ditto.
|
|
* src/flash/intel.c (_intel_flash_print_info, intel_flash_erase_block, intel_flash_unlock_block)
|
|
(intel_flash_program, intel_32_flash_driver, intel_16_flash_driver): Ditto.
|
|
* src/tap/cable/arcom.c (arcom_cable_driver): Ditto.
|
|
* src/tap/cable/byteblaster.c (byteblaster_cable_driver): Ditto.
|
|
* src/tap/cable/dlc5.c (dlc5_cable_driver): Ditto.
|
|
* src/tap/cable/ea253.c (ea253_cable_driver): Ditto.
|
|
* src/tap/cable/ei012.c (ei012_cable_driver): Ditto.
|
|
* src/tap/cable/keithkoep.c (keithkoep_cable_driver): Ditto.
|
|
* src/tap/cable/mpcbdm.c (mpcbdm_cable_driver): Ditto.
|
|
* src/tap/cable/wiggler.c (wiggler_cable_driver): Ditto.
|
|
|
|
2003-05-27 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/part/part.c (part_set_signal, part_get_signal): Moved variable declarations to beginning
|
|
of a block (Matan Ziv-Av).
|
|
|
|
2003-05-26 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bus.h (new_sh7727_bus): Added function declaration.
|
|
* src/cmd/detect.c (cmd_detect_run): Added bus driver for Hitachi SH7727.
|
|
* src/bus/Makefile.am (libbus_a_SOURCES): Added sh7727.c (patch 743140, Matan Ziv-Av).
|
|
* src/bus/sh7727.c: New file (based on patch 743140, Matan Ziv-Av).
|
|
|
|
2003-05-26 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/chain.h (chain_shift_data_registers): Added new parameter `capture_output' (idea from
|
|
patch 743146, Matan Ziv-Av).
|
|
* src/tap/chain.c (chain_shift_data_registers): Ditto.
|
|
All chain_shift_data_registers() function callers updated.
|
|
|
|
2003-05-26 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added broadcom/bcm5421s/STEPPINGS
|
|
and broadcom/bcm5421s/bcm5421s.
|
|
* data/MANUFACTURERS: Added new manufacturer ID code for Boradcom (patch 743129, Matan Ziv-Av).
|
|
* data/broadcom/PARTS: Added entry for BC5421S (patch 743129, Matan Ziv-Av).
|
|
* data/broadcom/bcm5421s/STEPPINGS: New file (patch 743129, Matan Ziv-Av).
|
|
* data/broadcom/bcm5421s/bcm5421s: Ditto.
|
|
|
|
2003-05-22 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AM_CONFIG_HEADER): Renamed acconfig.h configuration header to pkgcfg.h.
|
|
* config.h: Ditto.
|
|
|
|
2003-05-22 Marcel Telka <marcel@telka.sk>
|
|
|
|
* config.h: New file.
|
|
Changed all relevant source files to include this file unconditionaly.
|
|
* Makefile.am (noinst_HEADERS): Added config.h.
|
|
* configure.ac (AM_CONFIG_HEADER): Renamed generated configuration file
|
|
from config.h to acconfig.h.
|
|
|
|
2003-05-22 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c: Added new global variable 'big_endian'.
|
|
* include/jtag.h: Ditto.
|
|
* src/flash.c (flashmem): Added full support for little/big endian.
|
|
* src/readmem.c (readmem): Ditto.
|
|
* src/cmd/Makefile.am (libcmd_a_SOURCES): Added endian.c.
|
|
* src/cmd/cmd.c (cmds): Added new command 'endian'.
|
|
* src/cmd/endian.c: New file.
|
|
|
|
2003-05-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* Makefile.rules: New file.
|
|
* Makefile.am: Added Makefile.rules include.
|
|
(EXTRA_DIST): Added Makefile.rules.
|
|
* data/Makefile.am: Added Makefile.rules include.
|
|
* doc/Makefile.am: Ditto.
|
|
* include/Makefile.am: Ditto.
|
|
* po/Makevars: Ditto.
|
|
* src/Makefile.am: Ditto.
|
|
* src/bus/Makefile.am: Ditto.
|
|
* src/cmd/Makefile.am: Ditto.
|
|
* src/flash/Makefile.am: Ditto.
|
|
* src/lib/Makefile.am: Ditto.
|
|
* src/part/Makefile.am: Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
|
|
2003-05-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/signal.h: Renamed this file ...
|
|
* include/bssignal.h: ... to this one.
|
|
All includes changed.
|
|
* include/Makefile.am (noinst_HEADERS): Renamed signal.h to bssignal.h.
|
|
|
|
* include/data_register.h: Marked local include files with double quotes.
|
|
* include/instruction.h: Ditto.
|
|
* include/part.h: Ditto.
|
|
|
|
2003-05-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bsbit.h (bsbit, bsbit_t): Renamed typedef bsbit to bsbit_t.
|
|
All occurences of the bsbit type changed to bsbit_t.
|
|
|
|
2003-05-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/part.h (part_find_signal): New function declaration.
|
|
(part_set_signal, part_get_signal): Changed parameter signal name to signal pointer.
|
|
* src/part/part.c (part_find_signal): New function.
|
|
(part_set_signal, part_get_signal): Removed signal searching, used supplied pointer to signal.
|
|
* po/POTFILES.in: Added src/bus/ixp425.c, src/bus/pxa2x0.c, and src/bus/sa1110.c.
|
|
* src/bus/ixp425.c (bus_params_t, select_flash, unselect_flash, setup_address, set_data_in)
|
|
(setup_data, ixp425_bus_read_start, ixp425_bus_read_next, ixp425_bus_read_end, ixp425_bus_write)
|
|
(new_ixp425_bus): Optimized signal searching to increase bus access speed.
|
|
* src/bus/pxa2x0.c (bus_params_t, setup_address, set_data_in, setup_data, pxa250_bus_read_start)
|
|
(pxa250_bus_read_next, pxa250_bus_read_end, pxa250_bus_write, new_pxa250_bus): Ditto.
|
|
* src/bus/sa1110.c (bus_params_t, setup_address, set_data_in, setup_data, sa1110_bus_read_start)
|
|
(sa1110_bus_read_next, sa1110_bus_read_end, sa1110_bus_write, new_sa1110_bus): Ditto.
|
|
(sa1110_bus_width): Updated part_get_signal() function call. Added explicit signal search.
|
|
* src/cmd/get.c (cmd_get_run): Ditto.
|
|
* src/cmd/set.c (cmd_set_run): Updated part_set_signal() function call. Added explicit signal search.
|
|
|
|
2003-05-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CONFIG_FILES): Added src/cmd/Makefile.
|
|
* include/Makefile.am (noinst_HEADERS): Added jtag.h.
|
|
* include/jtag.h: New file.
|
|
* po/POTFILES.in: Updated.
|
|
* src/Makefile.am (SUBDIRS): Added cmd.
|
|
(jtag_SOURCES): Removed jtag.h and help.c.
|
|
(jtag_DEPENDENCIES): Added cmd/libcmd.a.
|
|
(jtag_LDADD): Added libcmd.
|
|
(INCLUDES): Removed JTAG_DATA_DIR.
|
|
* src/help.c: File removed.
|
|
* src/jtag.h: Ditto.
|
|
* src/jtag.c (jtag_parse_line): Removed command parsing and moved it to cmd directory.
|
|
(jtag_parse_file): Function is no longer static.
|
|
* src/cmd/Makefile.am: New file.
|
|
* src/cmd/cable.c: Ditto.
|
|
* src/cmd/cmd.c: Ditto.
|
|
* src/cmd/cmd.h: Ditto.
|
|
* src/cmd/detect.c: Ditto.
|
|
* src/cmd/detectflash.c: Ditto.
|
|
* src/cmd/discovery.c: Ditto.
|
|
* src/cmd/dr.c: Ditto.
|
|
* src/cmd/flashmem.c: Ditto.
|
|
* src/cmd/frequency.c: Ditto.
|
|
* src/cmd/get.c: Ditto.
|
|
* src/cmd/help.c: Ditto.
|
|
* src/cmd/instruction.c: Ditto.
|
|
* src/cmd/print.c: Ditto.
|
|
* src/cmd/quit.c: Ditto.
|
|
* src/cmd/readmem.c: Ditto.
|
|
* src/cmd/script.c: Ditto.
|
|
* src/cmd/set.c: Ditto.
|
|
* src/cmd/shift.c: Ditto.
|
|
|
|
* src/part/part.c (parts_print): Fixed header printing.
|
|
|
|
2003-05-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/part/data_register.c: Added l10n support. Marked messages for translation.
|
|
* src/part/instruction.c: Ditto.
|
|
* src/part/parse.c: Ditto.
|
|
* po/POTFILES.in: Added above files.
|
|
|
|
2003-05-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/parport/ppdev.c (ppdev_get_status): Inverted BUSY signal value.
|
|
|
|
* include/cfi.h (cfi_chip_t, cfi_array_t): New typedefs.
|
|
(cfi_array_free): New function prototype.
|
|
(detect_cfi): Changed function prototype.
|
|
* include/flash.h (set_flash_driver): Removed function prototype.
|
|
* src/flash/cfi.c (BW16): Macro removed.
|
|
(read2): Function removed.
|
|
(cfi_array_free): New function.
|
|
(detect_cfi): Added code to detect all CFI chips on the data bus.
|
|
* src/flash.c (flashcheck): Removed bus width checking. Updated due changes in src/flash/cfi.c.
|
|
(flashmsbin): Updated due changes in src/flash/cfi.c. Removed memory leak.
|
|
* src/readmem.c: Added l10n support. Marked messages for translation.
|
|
(detectflash): Updated due changes in src/flash/cfi.c. Removed memory leak.
|
|
Removed flash driver setup.
|
|
* po/POTFILES.in: Added src/readmem.c.
|
|
|
|
2003-05-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/part.h (part_print): New function declaration.
|
|
* src/part/part.c: Marked all user visible messages for translation.
|
|
(part_print): New function.
|
|
(parts_print): Simplified. Added part_print() call.
|
|
* po/POTFILES.in: Added src/part/part.c.
|
|
|
|
* src/Makefile.am (jtag_DEPENDENCIES): Added flash/libflash.a.
|
|
|
|
2003-05-15 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/cfi.h (detect_cfi): Added new parameter `adr'.
|
|
All relevant functions and callers updated.
|
|
|
|
2003-05-15 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (CPPFLAGS): Added path to the openwince include arm directory.
|
|
* include/bus.h (bus_width): Added new `adr' parameter for this macro.
|
|
All relevant functions and callers updated.
|
|
|
|
* src/bus/pxa2x0.c (bus_params_t): Added last_adr and MC_registers structure members.
|
|
(LAST_ADR, MC_pointer): New macros.
|
|
(pxa250_bus_read_start, pxa250_bus_read_next, pxa250_bus_read_end, pxa250_bus_write): Disabled
|
|
external bus cycles for addresses above 0x04000000.
|
|
(pxa250_bus_width): Removed some output messages. Implemented BOOT_DEF emulation.
|
|
(new_pxa250_bus): Implemented BOOT_DEF emulation.
|
|
|
|
2003-05-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Added cfi.h.
|
|
* include/cfi.h: New file.
|
|
* src/jtag.h (detect_cfi): Removed function declaration.
|
|
* src/flash.c: Replaced jtag.h include with cfi.h.
|
|
* src/readmem.c: Ditto.
|
|
|
|
* src/flash/Makefile.am (libflash_a_SOURCES): Added cfi.c.
|
|
* src/Makefie.am (jtag_SOURCES): Removed cfi.c.
|
|
* src/cfi.c: Moved this file ...
|
|
* src/flash/cfi.c: ... here and replaced jtag.h include with cfi.h one.
|
|
|
|
2003-05-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/part.h (part_t, parts_t): Macros removed.
|
|
* src/detect.c: Replaced obsolete types `parts' with `parts_t' and `part' with `part_t'.
|
|
* src/part/parse.c: Ditto.
|
|
* src/part/part.c: Ditto.
|
|
|
|
2003-05-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CONFIG_FILES): Added src/flash/Makefile.
|
|
* include/Makefile.am (noinst_HEADERS): Added flash.h.
|
|
* src/Makefile.am (SUBDIRS): Added flash.
|
|
(jtag_SOURCES): Removed flash.h, flash-intel.c, and flash-amd.c.
|
|
(jtag_LDADD): Added libflash.
|
|
* src/flash-amd.c: Moved this file ...
|
|
* src/flash/amd.c: ... here.
|
|
* src/flash-intel.c: Moved this file ...
|
|
* src/flash/intel.c: ... here.
|
|
* src/flash.h: Moved this file ...
|
|
* include/flash.h: ...here.
|
|
* src/flash/Makefile.am: New file.
|
|
|
|
2003-05-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_parse_file): Added support for command scripts from stdin.
|
|
|
|
2003-04-29 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added new manufacturer: DEC.
|
|
|
|
* src/jtag.c (jtag_create_jtagdir): Changed permissions for jtag directory.
|
|
|
|
* include/part.h (part_alloc, read_part): Changed return type from `part *' to `part_t *'.
|
|
(struct parts): Changed parts member type from `part **' to `part_t **'.
|
|
(parts_alloc): Changed return type from `parts *' to `parts_t *'.
|
|
* src/bus/ixp425.c (select_flash, unselect_flash, setup_address, set_data_in, setup_data):
|
|
Changed first parameter type from `part *' to `part_t *'.
|
|
* src/bus/pxa250.c (setup_address, set_data_in, setup_data): Ditto.
|
|
* src/bus/sa1110.c (setup_address, set_data_in, setup_data): Ditto.
|
|
|
|
* include/bus.h: Replaced static bus_driver_t architecture with dynamic bus_t.
|
|
Removed direct chain_t dependency. Added `params' and `prepare' members.
|
|
All related functions' parameter types changed.
|
|
* src/bus/ixp425.c (bus_params_t): New structure typedef.
|
|
(CHAIN, PART): New macros.
|
|
(ixp425_bus_prepare, ixp425_bus_free, new_ixp425_bus): New functions.
|
|
(ixp425_bus_driver, ixp425_bus): Renamed `ixp425_bus_driver' to `ixp425_bus' and updated
|
|
for new bus driver architecture.
|
|
* src/bus/pxa250.c (bus_params_t): New structure typedef.
|
|
(CHAIN, PART): New macros.
|
|
(pxa250_bus_prepare, pxa250_bus_free, new_pxa250_bus): New functions.
|
|
(pxa250_bus_driver, pxa250_bus): Renamed `pxa250_bus_driver' to `pxa250_bus' and updated
|
|
for new bus driver architecture.
|
|
* src/bus/sa1110.c (bus_params_t): New structure typedef.
|
|
(CHAIN, PART): New macros.
|
|
(sa1110_bus_prepare, sa1110_bus_free, new_sa1110_bus): New functions.
|
|
(sa1110_bus_driver, sa1110_bus): Renamed `sa1110_bus_driver' to `sa1110_bus' and updated
|
|
for new bus driver architecture.
|
|
* src/readmem.c (detectflash, readmem): Moved JTAG chain initialization to bus->prepare().
|
|
* src/flash.c (flashcheck): Ditto.
|
|
(flashmsbin, flashmem): Removed BYPASS instruction setup.
|
|
* src/jtag.c (bus_driver, bus): Replaced `bus_driver' with `bus' global variable.
|
|
(jtag_parse_line, main): Added `bus' deallocation.
|
|
* src/flash.h (flash_driver_t): Changed parameter type for all function members from
|
|
`chain_t*' to `bus_t *'.
|
|
All function callers changed.
|
|
|
|
2003-04-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.3.2 released.
|
|
|
|
2003-04-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/xilinx/PARTS: Added XCR3256XL-FT256 (Jachym Holecek).
|
|
* data/xilinx/xcr3256xl-ft256/STEPPINGS: New file (Jachym Holecek).
|
|
* data/xilinx/xcr3256xl-ft256/xcr3256xl-ft256: Ditto.
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added new files.
|
|
|
|
2003-04-02 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_INIT): Changed version number to 0.3.2.
|
|
|
|
2003-04-02 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/signal.h: Changed signal typedef to signal_t (thanks to Jachym Holecek).
|
|
All `signal' instances renamed to `signal_t'.
|
|
* src/tap/parport.c: Ported to NetBSD/i386 (Jachym Holecek).
|
|
* src/tap/parport/direct.c (parport_drivers): Conditionally removed direct_parport_driver.
|
|
* configure.ac: Added test for i386_set_ioperm() function. Defined HAVE_IOPERM
|
|
and HAVE_I386_SET_IOPERM.
|
|
|
|
2003-04-01 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/keithkoep.c: New file.
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Added cable/keithkoep.c.
|
|
* src/tap/cable.c (cable_drivers): Added keithkoep_cable_driver.
|
|
|
|
2003-03-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.3.1 released.
|
|
|
|
2003-03-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CONFIG_FILES): Added doc/Makefile.
|
|
* Makefile.am (SUBDIRS): Added doc.
|
|
|
|
2003-03-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/parport/direct.c (direct_connect): Fixed cable disconnecting loop.
|
|
|
|
2003-03-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_parse_line) <script>: Added support for `quit' command in scripts.
|
|
(jtag_parse_rc): Ditto.
|
|
(jtag_parse_file): Added support for comments and `quit' command in scripts.
|
|
(main): Added command line parameter list execution as scripts.
|
|
* data/intel/pxa250/STEPPING: Added support for Intel PXA255 A0 (thanks to Mike Sprauve).
|
|
* configure.ac (AC_INIT): Changed version number to 0.3.1.
|
|
|
|
2003-03-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* po/POTFILES.in: Added src/tap/parport/direct.c and src/tap/parport/ppdev.c.
|
|
* src/help.c (help) <cable>: Added help for `cable ppdev' command.
|
|
* src/tap/parport/ppdev.c (ppdev_open): Removed debug messages.
|
|
* src/jtag.c (jtag_parse_line) <cable>: Added chain_disconnect() call before
|
|
new cable connection.
|
|
|
|
2003-03-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CHECK_HEADERS): Added test for linux/ppdev.h.
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Added parport/ppdev.c.
|
|
* src/tap/parport.c (parport_drivers): Added ppdev parport driver.
|
|
* src/tap/parport/ppdev.c: New file.
|
|
|
|
2003-03-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/bsdl2jtag.c (endline): Removed compile warning.
|
|
|
|
2003-03-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/parport.h: New file. Added parport driver support.
|
|
All cable drivers modified.
|
|
* src/tap/parport.c: Ditto.
|
|
* src/tap/parport/direct.c: Ditto.
|
|
* src/jtag.c (jtag_parse_line) <cable>: Added parport driver support.
|
|
* include/Makefile.am (noinst_HEADERS): Added parport.h.
|
|
* src/tap/cable/generic.c: New file withgGeneric functions for cable drivers.
|
|
All cable drivers modified.
|
|
* src/tap/cable/generic.h: Ditto.
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Added parport.c, parport/direct.c, cable/generic.h,
|
|
and cable/generic.c.
|
|
|
|
* include/cable.h: Added dynamic cable objects. Added cable interpose functions.
|
|
All callers changed.
|
|
* src/tap/cable.c: Ditto.
|
|
|
|
* include/chain.h (chain_connect): Function removed.
|
|
(chain_disconnect): New function.
|
|
* src/tap/chain.c (chain_free): Modified for chain_disconnect() call.
|
|
(chain_connect): Removed.
|
|
(chain_disconnect): New function.
|
|
|
|
2003-03-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/Makefile.am (bin_PROGRAMS, bsdl2jtag_SOURCES): Added new bsdl2jtag conversion
|
|
tool (Matan Ziv-Av).
|
|
* src/bsdl2jtag.c: New file (Matan Ziv-Av).
|
|
|
|
2003-03-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (CPPFLAGS): Added common include paths.
|
|
* src/Makefile.am (INCLUDES): Removed common include paths.
|
|
* src/bus/Makefile.am (INCLUDES): Ditto.
|
|
* src/part/Makefile.am (INCLUDES): Ditto.
|
|
* src/tap/Makefile.am (INCLUDES): Ditto.
|
|
|
|
2003-03-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CONFIG_HEADERS): Replaced this `new' macro ...
|
|
(AM_CONFIG_HEADER): ... with this `old' one to make build compatible with automake-1.6.
|
|
(AM_GNU_GETTEXT_VERSION): Relaxed version number from 0.11.5 to 0.11.4.
|
|
* src/Makefile.am (jtag_LDADD): Added LIBINTL.
|
|
(LIBS): Removed LIBINTL.
|
|
(DEFS): Removed whole content ...
|
|
(INCLUDE): ... and added it here.
|
|
|
|
2003-03-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/chain.h: New file.
|
|
* src/tap/chain.c: Ditto.
|
|
* src/tap/Makefile.am (libtap_a_SOURCES): Added chain.c.
|
|
* include/Makefile.am (noinst_HEADERS): Added chain.h.
|
|
* src/jtag.c: Encapsulated parts, cable and TAP state into one object - chain.
|
|
All relevant function parameters changed to `chain'.
|
|
* src/tap/state.c: `trst' state moved to cable drivers.
|
|
All cable drivers changed.
|
|
* include/cable.h (cable_driver_t) <set_trst>: Changed return value from void to int.
|
|
All cable drivers changed.
|
|
(cable_driver_t) <get_trst>: New function.
|
|
Implemented this function to all cable drivers.
|
|
* include/part.h (part_shift_instruction, part_shift_data_register)
|
|
(parts_shift_instructions, parts_shift_data_registers): Funcions removed.
|
|
* src/part/part.c (part_shift_instruction, part_shift_data_register)
|
|
(parts_shift_instructions, parts_shift_data_registers): Ditto.
|
|
* src/tap/cable/arcom.c: Removed dependency on state.h.
|
|
* src/tap/cable/byteblaster.c: Ditto.
|
|
* src/tap/cable/dlc5.c: Ditto.
|
|
* src/tap/cable/ea253.c: Ditto.
|
|
* src/tap/cable/ei012.c: Ditto.
|
|
* src/tap/cable/mpcbdm.c: Ditto.
|
|
* src/tap/cable/wiggler.c: Ditto.
|
|
|
|
* include/state.h (bit): Replaced with common.h include.
|
|
(Unknown_State, Run_Test_Idle, Select_DR_Scan, Select_IR_Scan): Removed parentheses.
|
|
* include/tap.h (write_command): Removed unused declaration.
|
|
|
|
* src/detect.h: Removed file.
|
|
* src/jtag.h: New file with common jtag function declarations.
|
|
* src/Makefile.am (jtag_SOURCES): Removed detect.h, added jtag.h.
|
|
* src/cfi.c: Added jtag.h include. Moved common function declarations to jtag.h file.
|
|
* src/detect.c: Ditto.
|
|
* src/discovery.c: Ditto.
|
|
* src/flash.c: Ditto.
|
|
* src/help.c: Ditto.
|
|
* src/jtag.c: Ditto.
|
|
* src/readmem.c: Ditto.
|
|
|
|
* src/jtag.c (jtag_create_jtagdir, jtag_load_history, jtag_save_history, jtag_parse_line)
|
|
(jtag_readline_loop, jtag_parse_file, jtag_parse_rc): Changed functions to `static'.
|
|
|
|
* src/tap/tap.c: Added l10n support.
|
|
* po/POTFILES.in: Added src/tap/chain.c and src/tap/tap.c.
|
|
|
|
2003-03-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/part.h: Renamed types part to part_t, parts to parts_t,
|
|
tap_register to tap_register_t.
|
|
* include/register.h: Renamed tap_register type to tap_register_t.
|
|
|
|
2003-03-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Improved openwince include package detection.
|
|
|
|
2003-03-07 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/lib/getdelim.c: Added unistd.h include for ssize_t.
|
|
* src/lib/getline.c: Ditto.
|
|
|
|
2003-03-06 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Added test for readline library.
|
|
* src/Makefile.am (jtag_LDADD): Removed readline and ncurses.
|
|
|
|
2003-03-06 Marcel Telka <marcel@telka.sk>
|
|
|
|
* autogen.sh: Added test for autoreconf fail.
|
|
|
|
2003-02-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.3 released.
|
|
|
|
2003-02-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable.c: Added config.h include.
|
|
|
|
2003-02-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added Hitachi (Matan Ziv-Av).
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added Hitachi SH7727
|
|
files (Matan Ziv-Av).
|
|
* data/hitachi/PARTS: New file (Matan Ziv-Av).
|
|
* data/hitachi/sh7727/STEPPINGS: Ditto.
|
|
* data/hitachi/sh7727/sh7727: Ditto.
|
|
|
|
2003-02-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added Broadcom (Matan Ziv-Av).
|
|
* data/Makefile.am (nobase_dist_pkgdata_DATA): Added Broadcom BCM1250
|
|
files (Matan Ziv-Av).
|
|
* data/broadcom/PARTS: New file (Matan Ziv-Av).
|
|
* data/broadcom/bcm1250/STEPPINGS: Ditto.
|
|
* data/broadcom/bcm1250/bcm1250: Ditto.
|
|
|
|
2003-02-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/help.c (help): Marked translatable strings.
|
|
* src/jtag.c (jtag_parse_line): Ditto.
|
|
(jtag_parse_file): Ditto.
|
|
(main): Ditto.
|
|
* po/POTFILES.in: Added src/help.c and src/jtag.c.
|
|
|
|
2003-02-21 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Added conditional compilation for l10n.
|
|
|
|
2003-02-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/Makefile.am (jtag_SOURCES): Added missing flash.h.
|
|
* src/jtag.c: Added missing string.h include. Moved gettext.h include
|
|
to the top level of the include list.
|
|
* src/help.c: Moved gettext.h include to the top level of the include list.
|
|
|
|
2003-02-20 Marcel Telka <marcel@telka.sk>
|
|
|
|
* Makefile.am (SUBDIRS): Removed intl.
|
|
* autogen.sh: Replaced subsequent call of auto* tools with autoreconf one.
|
|
* configure.ac (AC_CONFIG_FILES): Removed intl/Makefile.
|
|
(AM_GNU_GETTTEXT): Added 'external' parameter.
|
|
|
|
2003-02-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CONFIG_HEADERS): Added new macro with config.h.
|
|
* autogen.sh: Added autoheader invocation.
|
|
|
|
2003-02-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Added gettext.h.
|
|
|
|
2003-02-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* autogen.sh: Added autopoint call. Added '-I m4' parameter for aclocal.
|
|
* Makefile.am (SUBDIRS): Added intl, include and po.
|
|
(DIST_SUBDIRS): Removed.
|
|
(ACLOCAL_AMFLAGS): Added '-I m4'.
|
|
* configure.ac (AC_INIT): Changed version number to 0.3.
|
|
(AC_CONFIG_FILES): Added intl/Makefile and po/Makefile.in.
|
|
(AM_GNU_GETTEXT): Added.
|
|
(AM_GNU_GETTEXT_VERSION): Added with version 0.11.5.
|
|
* include/gettext.h: Copied new file from gettext share.
|
|
* po/LINGUAS: Added new empty file.
|
|
* po/Makevars: Added new file.
|
|
* po/POTFILES.in: Added new empty file.
|
|
* src/Makefile.am (INCLUDES): Removed JTAG_DATA_DIR.
|
|
(localedir): Added path to locale directory.
|
|
(DEFS): Added JTAG_DATA_DIR and LOCALEDIR.
|
|
(LIBS): Added LIBINTL.
|
|
* src/help.c: Included gettext.h.
|
|
* src/jtag.c: Included gettext.h.
|
|
(main): Added l10n support.
|
|
|
|
2003-02-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flashmsbin): Changed flash error message.
|
|
(flashmem): Changed output messages. Enabled verify for 2 x 16, not
|
|
for 1 x 16. Added better end of file test for verify.
|
|
|
|
2003-02-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CONFIG_FILES): Added src/bus/Makefile.
|
|
* src/bus.h: Moved this file...
|
|
* include/bus.h: ...here.
|
|
* include/Makefile.am (noinst_HEADERS): Added bus.h.
|
|
* src/ixp425.c: Moved this file...
|
|
* src/bus/ixp425.c: ...here.
|
|
* src/pxa250.c: Moved this file...
|
|
* src/bus/pxa2x0.c: ...here.
|
|
* src/sa1110.c: Moved this file...
|
|
* src/bus/sa1110.c: ...here.
|
|
* src/bus/Makefile.am: New file.
|
|
* src/Makefile.am (SUBDIRS): Added bus.
|
|
(jtag_SOURCES): Removed bus.h, ixp425.c, pxa250.c, sa1110.c.
|
|
(jtag_DEPENDENCIES): Added libbus.a.
|
|
(jtag_LDADD): Ditto.
|
|
|
|
2003-02-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable.c: Added <sys/types.h> include for useconds_t on some systems.
|
|
* src/flash-amd.c (amdstatus29): Disabled unused function.
|
|
(amdisprotected): Ditto.
|
|
|
|
2003-02-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_parse_line): Fixed segfault for 'set' command.
|
|
|
|
2003-02-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_parse_line): Added new 'get signal' command.
|
|
* src/help.c (help): Added help for new 'get signal' command.
|
|
|
|
2003-02-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/intel/pxa250/pxa250: Changed comment.
|
|
* data/intel/pxa250/pxa250c0: Ditto.
|
|
|
|
2003-02-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/help.c (help): Added help for new command 'script'.
|
|
|
|
2003-02-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash-intel.c (intel_flash_autodetect): Fixed Intel flash algorithm Id.
|
|
(intel_flash_autodetect32): Ditto.
|
|
|
|
2003-02-17 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac (AC_CHECK_FUNCS): Added getdelim and getline.
|
|
(AC_CONFIG_FILES): Added src/lib/Makefile.
|
|
* src/Makefile.am (SUBDIRS): Added lib.
|
|
(jtag_DEPENDENCIES): Added libjtaglib.a.
|
|
(jtag_LDADD): Ditto.
|
|
* src/jtag.c: Added portable getline() declaration.
|
|
* src/lib/Makefile.am: New file.
|
|
* src/lib/getdelim.c: Ditto.
|
|
* src/lib/getline.c: Ditto.
|
|
|
|
2003-02-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag_creae_jtagdir): New function (Alessandro Zummo).
|
|
(jtag_load_history): Ditto.
|
|
(jtag_save_history): Ditto.
|
|
(jtag_readline_loop): Ditto.
|
|
(jtag_parse_file): Ditto.
|
|
(jtag_parse_rc): Ditto.
|
|
(jtag_parse_line): New funcion, content extracted from main function, added new
|
|
'script' command (Alessandro Zummo).
|
|
(main): Moved parsing capability to jtag_parse_line function (Alessandro Zummo).
|
|
|
|
2003-02-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flash_drivers): Added missing 1 x 16 Intel flash driver.
|
|
|
|
2003-02-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Corrected error message for 'instruction' command and added
|
|
a notice when an instruction is unknown (Alessandro Zummo).
|
|
|
|
2003-02-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Fixed segfault in 'detectflash'. Thanks to August Hörandl
|
|
for reporting this issue.
|
|
|
|
2003-02-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/Makefile.am (jtag_SOURCES): Added new flash files with flash driver
|
|
framework (August Hörandl).
|
|
* src/flash-amd.c: New file with AMD flash support (August Hörandl).
|
|
* src/flash-intel.c: New file. Extracted Intel flash support from src/flash.c
|
|
file (August Hörandl, me).
|
|
* src/flash.c (set_flash_driver): New function. Added support for flash
|
|
drivers (August Hörandl).
|
|
(flashceck): Ditto.
|
|
(flashmsbin): Added support for flash driver (August Hörandl).
|
|
(flashmem): Ditto.
|
|
(flash_erase_block): Function moved to src/flash-intel.c (August Hörandl).
|
|
(flash_unlock_block): Ditto.
|
|
(flash_program): Ditto.
|
|
(flash_erase_block32): Ditto.
|
|
(flash_unlock_block32): Ditto.
|
|
(flash_program32): Ditto.
|
|
* src/flash.h: New file. Interface for flash drivers (August Hörandl).
|
|
* src/help.c (help): Added list of supported flash drivers for 'flashmem'
|
|
command (August Hörandl).
|
|
* src/readmem.c (detectflash): Removed Intel specific code. Enhanced output
|
|
messages (August Hörandl).
|
|
|
|
2003-02-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (jtag): Added command history load/save support (August Hörandl).
|
|
|
|
2003-02-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/readmem.c (readmem): Added support for 1 x 16 bit memory configuration and
|
|
buffered file writes (Christian Pellegrin).
|
|
* src/flash.c (flashmem): Added support for 1 x 16 bit flash configuration and
|
|
buffered file reads (Christian Pellegrin).
|
|
(flash_erase_block): Added debug messages (Christian Pellegrin).
|
|
(flash_unlock_block): Added debug message (Christian Pellegrin).
|
|
(flash_program): Ditto.
|
|
|
|
2003-02-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/cfi.c (detect_cfi): Added support for 1 x 16 bit flash configuration (Christian
|
|
Pellegrin).
|
|
* src/detect.c (find_record): Added error message if file cannot be opened (Christian
|
|
Pellegrin).
|
|
|
|
2003-02-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/xilinx/xc2c256-tq144/xc2c256-tq144: Added JTAG declarations for Xilinx
|
|
XC2C256-TQ144 (Alessandro Zummo).
|
|
* data/xilinx/xc2c256-tq144/STEPPINGS: Ditto.
|
|
* data/xilinx/PARTS: Ditto.
|
|
* data/Makefile.am: Ditto.
|
|
|
|
2003-02-14 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/ixp425.c (setup_address): Removed set_gpio() call.
|
|
(set_gpio): Removed unused function.
|
|
|
|
2003-02-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/ixp425.c: Added bus driver for Intel IXP425 (Christian Pellegrin).
|
|
* src/bus.h: Ditto.
|
|
* src/jtag.c (main): Ditto.
|
|
* src/Makefile.am (jtag_SOURCES): Added ixp425.c (Christian Pellegrin).
|
|
|
|
2003-02-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/intel/ixp425/ixp425: Added JTAG declarations for Intel IXP425 (Christian
|
|
Pellegrin).
|
|
* data/intel/ixp425/STEPPINGS: Ditto.
|
|
* data/intel/PARTS: Ditto.
|
|
* data/Makefile.am: Ditto.
|
|
|
|
2003-02-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/bsbit.h (BSBIT_BIDIR): Added new macro (Christian Pellegrin).
|
|
* src/part/bsbit.c (bsbit_alloc): Added support for bidirectional pins (Christian
|
|
Pellegrin).
|
|
* src/part/parse.ci (read_part): Ditto.
|
|
|
|
2003-02-10 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/sa1110.c (sa1110_bus_read_start): Added support for all six static memory banks.
|
|
The function is now 'static'.
|
|
(sa1110_bus_read_end): Ditto.
|
|
(sa1110_bus_read_next): The function is now 'static'.
|
|
(sa1110_bus_read): Ditto.
|
|
(sa1110_bus_width): Ditto.
|
|
(sa1110_bus_write): Added support for all six static memory banks (bug 682660).
|
|
The function is now 'static'.
|
|
|
|
2003-02-07 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/arcom.c: Added support for Arcom JTAG Cable (patch 682310,
|
|
Ian Campbell).
|
|
* src/tap/cable.c: Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
|
|
2003-02-07 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/mpcbdm.c (mpcbdm_clock): Fixed port address for TRST & TRST1.
|
|
|
|
2003-02-07 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/mpcbdm.c: Added support for Mpcbdm JTAG Cable (Christian Pellegrin).
|
|
* src/tap/cable.c: Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
|
|
2003-02-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/help.c (help): Added missing short help description for 'set' command.
|
|
* src/jtag.c (main): Added test for uninitialized ps for 'set' command.
|
|
* src/tap/tap.c (tap_shift_register): Changed final state to Run-Test/Idle
|
|
for immediately propagation of the new BSR values.
|
|
|
|
2003-02-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Added more checks for syntax errors. Added support for
|
|
printing input data registers - command 'dr'. Added 'set signal'
|
|
command.
|
|
* src/help.c (help): Updated help for 'dr' command, added help for 'set
|
|
signal.
|
|
|
|
2003-02-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.2.2 released.
|
|
|
|
2003-02-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Changed version number to 0.2.2.
|
|
|
|
2003-02-04 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flashmsbin): Changed instructions to BYPASS after successfull
|
|
flash.
|
|
(flashmem): Ditto.
|
|
|
|
2003-01-30 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/byteblaster.c (byteblaster_init): Added support for
|
|
parallel ports with I/O addresses above 0x3FF.
|
|
(byteblaster_done): Ditto.
|
|
* src/tap/cable/dlc5.c (dlc5_init): Ditto.
|
|
(dlc5_done): Ditto.
|
|
* src/tap/cable/ea253.c (ea253_init): Ditto.
|
|
(ea253_done): Ditto.
|
|
* src/tap/cable/ei012.c (ei012_init): Ditto.
|
|
(ei012_done): Ditto.
|
|
* src/tap/cable/wiggler.c (wiggler_init): Ditto.
|
|
(wiggler_done): Ditto.
|
|
|
|
2003-01-19 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Added AC_GNU_SOURCE.
|
|
|
|
2003-01-18 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Added new 'frequency' command.
|
|
* src/help.c (help): Added help for 'frequency' command.
|
|
* include/cable.h (cable_wait): Added new function prototype.
|
|
* src/tap/cable.c (cable_wait): Added new function.
|
|
* src/tap/cable/byteblaster.c (byteblaster_clock): Added support for TCK
|
|
frequency limit.
|
|
(byteblaster_get_tdo): Ditto.
|
|
* src/tap/cable/dlc5.c (dlc5_clock): Ditto.
|
|
(dlc5_get_tdo): Ditto.
|
|
* src/tap/cable/ea253.c (ea253_clock): Ditto.
|
|
(ea253_get_tdo): Ditto.
|
|
* src/tap/cable/ei012.c (ei012_clock): Ditto.
|
|
(ei012_get_tdo): Ditto.
|
|
* src/tap/cable/wiggler.c (wiggler_clock): Ditto.
|
|
(wiggler_get_tdo): Ditto.
|
|
|
|
2003-01-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/MANUFACTURERS: Added Cypress (patch 669157). Thanks to Chris Ellec.
|
|
|
|
2003-01-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.2.1 released.
|
|
|
|
2003-01-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/state.h: Added new function tap_state_reset().
|
|
* src/tap/state.c (tap_state_reset): Ditto.
|
|
* src/tap/tap.c (tap_reset): Added explicit TAP state reset.
|
|
|
|
2003-01-13 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Changed version number to 0.2.1.
|
|
|
|
2003-01-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/bytebaster.c: Added support for Altera ByteBlaster family cables.
|
|
* src/tap/cable.c: Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
* src/help.c (help): Increased space for cable short name.
|
|
|
|
2003-01-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable/wiggler.c: Added support for Macraigor Wiggler JTAG Cable (Stas Khirman).
|
|
* src/tap/cable.c: Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
|
|
2003-01-10 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/tap/cable.c: Added missing stdlib.h include (bug 665923). Thanks to Chris Ellec.
|
|
|
|
2003-01-09 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/jtag.c (main): Fixed minor typo in 'cable' output message.
|
|
|
|
2003-01-09 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/discovery.c (detect_register_size): Changed register length test iteration.
|
|
Now the test iterates to MAX_REGISTER_LENGTH, not to MAX_REGISTER_LENGTH - 1.
|
|
|
|
2003-01-08 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.2 released.
|
|
|
|
2003-01-08 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/cable.h: Unified and simplified cable driver handling, added driver name
|
|
and driver description into driver interface structure.
|
|
* src/help.c (help): Ditto.
|
|
* src/jtag.c (main): Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
* src/tap/cable.c: Ditto.
|
|
* src/tap/cable/dlc5.c: Ditto.
|
|
* src/tap/cable/ea253.c: Ditto.
|
|
* src/tap/cable/ei012.c: Ditto.
|
|
|
|
2003-01-08 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/cable.h: Added cable driver for ETC EI012 JTAG Cable.
|
|
* src/help.c (help): Ditto.
|
|
* src/jtag.c (main): Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
* src/tap/cable/ei012.c: Ditto.
|
|
|
|
2003-01-08 Marcel Telka <marcel@telka.sk>
|
|
|
|
* configure.ac: Bumped version number to 0.2, added check-new and dist-bzip2
|
|
parameters to AM_INIT_AUTOMAKE() invocation.
|
|
* src/jtag.c: Updated year in initial banner.
|
|
|
|
2003-01-08 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/cable.h: Added cable driver for Xilinx DLC5 JTAG Parallel Cable III.
|
|
* src/help.c (help): Ditto.
|
|
* src/jtag.c (main): Ditto.
|
|
* src/tap/Makefile.am: Ditto.
|
|
* src/tap/cable/dlc5.c: Ditto.
|
|
|
|
2003-01-08 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/Makefile.am: Removed ctrl.h, added cable.h.
|
|
* include/ctrl.h: Removed obsolete file.
|
|
* include/cable.h: Added common declarations for JTAG cable drivers.
|
|
* src/detect.c: Replaced ctrl.h include with cable.h (JTAG cable driver support).
|
|
* src/discovery.c: Ditto.
|
|
* src/tap/tap.c: Ditto.
|
|
* src/help.c (help): Added help for new command 'cable'.
|
|
* src/jtag.c (main): Added support for JTAG cable drivers, added new command 'cable'.
|
|
* src/tap/Makefile.am: Removed ctrl.c, added cable/ea253.c, updated includes.
|
|
* src/tap/ctrl.c: Removed obsolete file.
|
|
* src/tap/state.c: Changed default TRST state to 1.
|
|
* src/tap/cable/ea253.c: Added driver for EA253 JTAG cable.
|
|
|
|
2003-01-06 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/discovery.c (discovery): Fixed memory leaks, added out of memory test,
|
|
added test for invalid IR length.
|
|
|
|
2003-01-05 Marcel Telka <marcel@telka.sk>
|
|
|
|
* include/register.h (register_inc, register_dec, register_shift_right,
|
|
register_shift_left): Added new functions.
|
|
* src/tap/register.c (register_inc, register_dec, register_shift_right,
|
|
register_shift_left): Ditto.
|
|
* src/Makefile.am: Added discovery.c file.
|
|
* src/discovery.c: Added new file with discovery() implementation.
|
|
* src/help.c (help): Added help for 'discovery' command.
|
|
* src/jtag.c (main): Added 'discovery' command.
|
|
* src/tap/tap.c (write_command): Removed unused function.
|
|
|
|
2002-12-16 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/Makefile.am: Renamed intel/pxa250/pxa260 to intel/pxa250/pxa250c0.
|
|
|
|
2002-12-11 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/intel/pxa250/STEPPINGS: Renamed file pxa260 to pxa250c0.
|
|
* data/intel/pxa260: Ditto.
|
|
* data/intel/pxa250c0: Ditto.
|
|
|
|
2002-11-29 Marcel Telka <marcel@telka.sk>
|
|
|
|
* src/flash.c (flashmsbin, flashmem): Fixed crash if flash memory is not detected.
|
|
* src/readmem.c (detectflash): Ditto.
|
|
|
|
2002-11-27 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/xilinx/xcr3128xl-cs144/xcr3128xl-cs144: Added pins and BSR bits.
|
|
|
|
2002-11-26 Marcel Telka <marcel@telka.sk>
|
|
|
|
* data/xilinx/xcr3128xl-cs144/xcr3128xl-cs144: Added user-defined
|
|
instructions.
|
|
|
|
2002-11-25 Marcel Telka <marcel@telka.sk>
|
|
|
|
Version 0.1 released.
|
|
|
|
|
|
$Revision$
|