urjtag/jtag

$Id$

JTAG Tools
~~~~~~~~~~

JTAG Tools is a software package which enables working with JTAG-aware
(IEEE 1149.1) hardware devices (parts) and boards through JTAG adapter.

This package has open and modular architecture with ability to write
miscellanous extensions (like board testers, flash memory programmers,
and so on).

JTAG Tools package is free software, covered by the GNU General Public
License, and you are welcome to change it and/or distribute copies of it
under certain conditions. There is absolutely no warranty for JTAG Tools.
Please read COPYING file for more info.

Warning: This software may damage your hardware!

Feedback and contributions are welcome.


Supported operating systems
---------------------------

JTAG Tools should run on all Unix like operating systems including
MS Windows 95/98/Me/NT/2000/XP with Cygwin installed.

Tested operating systems:
- RedHat Linux 8.0
- MS Windows 2000/XP + Cygwin
- NetBSD/i386


Supported hardware
------------------

JTAG adapters/cables (see 'help cable' command for more info):
- Arcom JTAG Cable
- Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port Download Cable
- Xilinx DLC5 JTAG Parallel Cable III
- ETC EA253 JTAG Cable
- ETC EI012 JTAG Cable
- Keith & Koep JTAG Cable
- Mpcbdm JTAG Cable
- Macraigor Wiggler JTAG Cable

JTAG-aware parts (chips):
- Atmel ATmega128 (partial support)
- Broadcom BCM1250
- Hitachi SH7727
- Intel IXP425
- Intel SA1110
- Intel PXA250/PXA255
- Intel PXA261/262
- Xilinx XC2C256-TQ144
- Xilinx XCR3128XL-CS144
- Xilinx XCR3256XL-FT256

Flash chips (2 x 16 bit configuration only):
- Intel 28FxxxJ3A (28F320J3A, 28F640J3A, 28F128J3A)
- Intel 28FxxxK3 (28F640K3, 28F128K3, 28F256K3)
- Intel 28FxxxK18 (28F640K18, 28F128K18, 28F256K18)
- AMD Am29LV64xD (Am29LV640D, Am29LV641D, Am29LV642D)


Tested hardware
---------------

Intel SA1110 B2 + 2 x Intel 28F128J3A (Compaq iPAQ H3630)
Intel SA1110 B4 + 2 x Intel 28F640J3A (Compaq iPAQ H3600, see http://openwince.sourceforge.net/jtag/iPAQ-3600/)
Intel SA1110 B4 + 2 x Intel 28F128J3A
Intel PXA250 B2 + 2 x AMD Am29LV640D
Intel PXA250 B1 + 2 x Intel 28F128K3 (ETC WEP EP250)
Intel PXA250 C0 + 2 x Intel 28F128K3 (ETC WEP EP250)
Xilinx XCR3128XL-CS144 (ETC WEP EP250)


Required software
-----------------

Required only for MS Windows:
- Current Cygwin net installation from http://cygwin.com/

Required for all systems:
- include package from http://openwince.sourceforge.net/include/


Build & installation instructions
---------------------------------

1. Download and install required software (see previous section).
2. Download and unpack jtag sources.
3. Run ./configure script. Use optional --with-include parameter.
   See `./configure --help` for more info.
4. Run `make`.
5. Run `make install`.


Running JTAG Tools
------------------

Connect your JTAG adapter between your PC and target device and turn
on your device.

To run JTAG Tools type "jtag" and press <Enter>. jtag should start and
display some initial informations. Output should end with line like this:

jtag>

This is "jtag command prompt". Type "help" and press <Enter> for initial help
about available commands. To exit JTAG Tools type "quit" and press <Enter>.

===> First task: Select JTAG cable and parallel port address.

Type "help cable" for list of supported JTAG cables.
Type "cable" command with arguments. Example:

jtag> cable parallel 0x378 EA253
Initializing ETC EA253 JTAG Cable on parallel port at 0x378

===> Second task: Detect parts on the JTAG chain.

Type "detect" at the jtag command prompt:
jtag> detect

Your output should look like this:

Device Id: 01011001001001100100000000010011
  Manufacturer: Intel
  Part:         PXA250
  Stepping:     C0
  Filename:     /usr/local/share/jtag/intel/pxa250/pxa250c0

If you get empty output or this error message

	detect_parts: bad JTAG connection (TDO is 1)

your JTAG adapter is not connected properly, or your target board
doesn't work, or your JTAG-aware chip doesn't support JTAG ID detection
(IDCODE instruction).

"detect" command is required before all other commands.

===> Third task: Print current JTAG chain status.

Type "print" at the jtag command prompt. Here is an output example:

jtag> print
 No. Manufacturer         Part                 Stepping Instruction          Register
----------------------------------------------------------------------------------------
   0 Intel                PXA250               C0       BYPASS               BR
jtag>

===> Fourth task: Sample device pin status.

jtag> instruction 0 SAMPLE/PRELOAD
jtag> shift ir
jtag> shift dr
jtag> dr 0
10001100100000100001100101111111111111111110011011100000111011111111111111111111
11111111111111111111111111111111111111111111101111111101100000100010101000000000
00011111000000111010111111100000100001100100000000000000000111000011100000000000
00000000000000000000000000000001000000000000000000000000000000000000000000000000
11110000000000000000000000000000000000000000001000000000000000000000000000000000
0000000000
jtag> print
 No. Manufacturer         Part                 Stepping Instruction          Register
----------------------------------------------------------------------------------------
   0 Intel                PXA250               C0       SAMPLE/PRELOAD       BSR
jtag> get signal 0 BOOT_SEL[0]
BOOT_SEL[0] = 0
jtag>

Note: BSR is "Boundary Scan Register"

===> Fifth task: Burn flash connected to the part.

jtag> flashmem 0 brux.b
0x00000000
Note: Supported configuration is 2 x 16 bit only
BOOT_SEL: Asynchronous 32-bit ROM

2 x 16 bit CFI devices detected (QRY ok)!

program:
block 0 unlocked
erasing block 0: 0
addr: 0x00002854
verify:
addr: 0x00002854
Done.
jtag>

or:

jtag> flashmem msbin xboot.bin
Note: Supported configuration is 2 x 16 bit only
BOOT_SEL: Asynchronous 32-bit ROM

2 x 16 bit CFI devices detected (QRY ok)!

block 0 unlocked
erasing block 0: 0
program:
record: start = 0x00000000, len = 0x00000004, checksum = 0x000001EB
record: start = 0x00000040, len = 0x00000008, checksum = 0x000001B0
record: start = 0x00001000, len = 0x00002B30, checksum = 0x00122CAB
record: start = 0x00004000, len = 0x00000160, checksum = 0x0000684B
record: start = 0x00005000, len = 0x00000054, checksum = 0x000008EE
record: start = 0x00005054, len = 0x00000030, checksum = 0x00000DA9
record: start = 0x00000000, len = 0x00001000, checksum = 0x00000000

verify:
record: start = 0x00000000, len = 0x00000004, checksum = 0x000001EB
record: start = 0x00000040, len = 0x00000008, checksum = 0x000001B0
record: start = 0x00001000, len = 0x00002B30, checksum = 0x00122CAB
record: start = 0x00004000, len = 0x00000160, checksum = 0x0000684B
record: start = 0x00005000, len = 0x00000054, checksum = 0x000008EE
record: start = 0x00005054, len = 0x00000030, checksum = 0x00000DA9
record: start = 0x00000000, len = 0x00001000, checksum = 0x00000000

Done.
jtag>


Contacts
--------

Homepage: http://openwince.sourceforge.net/jtag/

CVS repository: http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/openwince/jtag/

Please report and track bugs at (please use Category 'jtag'):
http://sourceforge.net/tracker/?group_id=52603&atid=469850

Mailing list (discussion, questions): openwince-list@lists.sourceforge.net
Subscribe: http://lists.sourceforge.net/mailman/listinfo/openwince-list

Mailing list (announce): openwince-announce@lists.sourceforge.net
Subscribe: http://lists.sourceforge.net/mailman/listinfo/openwince-announce

Patches and improvements are welcome at (please use Category 'jtag'):
http://sourceforge.net/tracker/?group_id=52603&atid=469852

Feature requests are welcome at (please use Category 'jtag'):
http://sourceforge.net/tracker/?group_id=52603&atid=469853

Support requests are welcome at (please use Category 'jtag'):
http://sourceforge.net/tracker/?group_id=52603&atid=469851